Telit Wireless Solutions xE50-868 series User manual

xE50-868 RF Module User Guide
1VV0300905 Rev.14 – 2018-01-2503-16

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 2 of 45
APPLICABILITY TABLE
PRODUCT
LE50-868
ME50-868

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 3 of 45
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Notice
While reasonable efforts have been made to assure the accuracy of this document, Telit
assumes no liability resulting from any inaccuracies or omissions in this document, or from
use of the information obtained herein. The information in this document has been carefully
checked and is believed to be entirely reliable. However, no responsibility is assumed for
inaccuracies or omissions. Telit reserves the right to make changes to any products described
herein and reserves the right to revise this document and to make changes from time to time
in content hereof with no obligation to notify any person of revisions or changes. Telit does
not assume any liability arising out of the application or use of any product, software, or
circuit described herein; neither does it convey license under its patent rights or the rights of
others.
It is possible that this publication may contain references to, or information about Telit
products (machines and programs), programming, or services that are not announced in your
country. Such references or information must not be construed to mean that Telit intends to
announce such Telit products, programming, or services in your country.
Copyrights
This instruction manual and the Telit products described in this instruction manual may be,
include or describe copyrighted Telit material, such as computer programs stored in
semiconductor memories or other media. Laws in the Italy and other countries preserve for
Telit and its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the
copyrighted material. Accordingly, any copyrighted material of Telit and its licensors
contained herein or in the Telit products described in this instruction manual may not be
copied, reproduced, distributed, merged or modified in any manner without the express
written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed
to grant either directly or by implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a
product.
Computer Software Copyrights
The Telit and 3rd Party supplied Software (SW) products described in this instruction manual
may include copyrighted Telit and other 3rd Party supplied computer programs stored in
semiconductor memories or other media. Laws in the Italy and other countries preserve for
Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer
programs, including the exclusive right to copy or reproduce in any form the copyrighted
computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW
computer programs contained in the Telit products described in this instruction manual may
not be copied (reverse engineered) or reproduced in any manner without the express written
permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any
license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied
SW, except for the normal non-exclusive, royalty free license to use that arises by operation
of law in the sale of a product.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 4 of 45
Usage and Disclosure Restrictions
License Agreements
The software described in this document is the property of Telit and its licensors. It is
furnished by express license agreement only and may be used only in accordance with the
terms of such an agreement.
Copyrighted Materials
Software and documentation are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the software or documentation may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language,
in any form or by any means, without prior written permission of Telit
High Risk Materials
Components, units, or third-party products used in the product described herein are NOT
fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control
equipment in the following hazardous environments requiring fail-safe controls: the operation
of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic
Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s)
specifically disclaim any expressed or implied warranty of fitness for such High Risk
Activities.
Trademarks
TELIT and the Stylized T Logo are registered in Trademark Office. All other product or
service names are the property of their respective owners.
Copyright © Telit Communications S.p.A. 2011.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 5 of 45
Contents
1. Introduction ......................................................... 7
1.1. Scope ................................................................... 7
1.2. Audience .......................................................... 7
1.3. Contact Information, Support ................... 7
1.4. Document Organization ..............................8
1.5. Text Conventions ..........................................8
1.6. Related Documents .......................................9
2. Requirements.................................................... 10
2.1. General Requirements...............................10
2.2. 868 MHz band Requirements..................10
2.3. Other Requirements ...................................12
2.4. Functional Requirements .........................12
2.5. Software ........................................................12
2.6. Temperature Requirements .....................12
3. General Characteristics ..................................13
3.1. Mechanical Characteristics ...................... 13
3.2. Mechanical dimensions .............................14
3.3. Recommended Land pattern ....................14
3.4. DC Characteristics...................................... 15
3.5. LE50-868 Functional Characteristics .16
3.6. ME50-868 Functional Characteristics 19
3.7. Digital Characteristic ................................ 22
3.8. Absolute Maximum Ratings.................... 22
3.9. Ordering Information ............................... 23
4. Technical Description ..................................... 25
4.1. Module Top View (cover side) ................. 25
4.2. Pin-out of the module LE50-868 ........... 26
4.3. Pin-out of the module ME50-868 ...........27
4.4. Pin-out of the DIP Module........................ 28

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 6 of 45
4.5. Description of the signals ......................... 29
5. Process Information ....................................... 30
5.1. Delivery ........................................................ 30
5.2. Storage............................................................ 31
5.3. Moisture sensibility .................................... 31
5.4. Additional Precautions.............................. 31
5.5. Soldering pad pattern ................................. 31
5.6. Solder paste .................................................. 32
5.7. PCB pad design ........................................... 33
5.8. PCB pad dimensions ................................. 33
5.9. Placement ..................................................... 34
5.10. Soldering Profile (RoHS Process) ...... 34
6. Board Mounting Recommendation ............. 36
6.1. Electrical environment............................. 36
6.2. Power supply decoupling on xE50-868
module...................................................................... 36
6.3. RF layout considerations ..........................37
6.4. Antenna requirements .............................. 38
Antenna connections on printed circuit boards
38
6.5.............................................................................. 38
6.6. xE50-868 Interfacing .............................. 40
7. Annexes .............................................................. 41
7.1. Examples of propagation attenuation......41
7.2. EU Declaration of conformity ................ 42
7.3. Safety Recommendations ........................ 42
8. Glossary ............................................................. 43
9. Document History ...........................................44
1.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 7 of 45
1. Introduction
1.1. Scope
Scope of this document is to present the features and the application of the Telit xE50-868
radio modules (LE50-868 and ME50-868).
1.2. Audience
This document is intended for developers using Telit xE50-868 radio modules.
1.3. Contact Information,
Support
For general contact, technical support, to report documentation errors and to order manuals,
contact Telit Technical Support Center (TTSC) at:
TS-[email protected]
TS-[email protected]
TS-[email protected]
TS-[email protected]
Alternatively, use:
http://www.telit.com/en/products/technical-support-center/contact.php
For detailed information about where you can buy the Telit modules or for recommendations
on accessories and components visit:
http://www.telit.com
To register for product news and announcements or for product questions contact Telit
Technical Support Center (TTSC).
Our aim is to make this guide as helpful as possible. Keep us informed of your comments and
suggestions for improvements.
Telit appreciates feedback from the users of our information.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 8 of 45
1.4. Document Organization
This document contains the following chapters
“Chapter 1: “Introduction” provides a scope for this document, target audience, contact and
support information, and text conventions.
“Chapter 2: “Requirements” gives an overview of the limitations imposed by Reference
standards.
“Chapter 3: “General Characteristics”describes in detail the characteristics of the product.
“Chapter 4: “Technical Description” describes in detail the signals and pin-out of the product.
“Chapter 5: “Process information” describes in detail the delivery, storage, soldering and
placement of the product.
“Chapter 6: “Board Mounting Recommendations” describes in detail the interface and
coupling of the product.
“Chapter 7: “Annexes” describes examples of propagation attenuation.
“Chapter 8: “Safety Recommendations” describes recommendation for proper usage.
“Chapter 9: “Glossary”shows acronyms used in the document.
“Chapter 10: “Document history” describes the revision history of the document.
1.5. Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily
injury may occur.
Caution or Warning – Alerts the user to important points about integrating the module, if
these points are not followed, the module and end user equipment may fail or malfunction.
Tip or Information – Provides advice and suggestions that may be useful when
integrating the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 9 of 45
1.6. Related Documents
•[1] EN 300 220-1, EN 300 220-2 v3.1.1, ETSI Standards for SRD,
•[2] ERC Rec 70-03 version of 13 October 2017
•[3] RoHS 2 Directive 2011/65/EU
•[4] SR Tool User Guide, 1vv0300899
•[5] 2011/829/EU,, Harmonization of the radio spectrum for use by short-range
devices
•[6] 2009/381/EC, Amending Decision 2006/771/EC on harmonization of the radio
spectrum for use by short-range devices
•[7] Star Network Protocol Stack User Guide, 1vv0300873
•[11] EN 13757-4: 2013 Wireless M-Bus
•[12] Telit_Wireless_M-bus_2013_Part4_User_Guide 1vv0300953

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 10 of 45
2. Requirements
2.1. General Requirements
The LE50-868 and ME50-868 (or simply xE50-868) modules are multi-band radio boards,
delivering up to 25 mW in the 868 MHz ISM band (unlicensed frequency band).
They are delivered with preloaded protocol stacks:
•LE50-868: “Star Network” Protocol stack
•ME50-868: “Wireless M-Bus Part4:2013” Protocol stack.
LE50-868 and ME50-868 are pin-to-pin compatible with LE and ME modules working at
different frequencies.
LE50-868 and ME50-868 are also pin-to-pin compatible with Telit ZE Family (ZigBee PRO
stack).
2.2. 868 MHz band
Requirements
The “ERC recommendation 70-03” describes also the different usable sub-bands in the 868
MHz license free band, in terms of bandwidth, maximum power, duty cycle and channel
spacing. LE50-868/ME50-868 can operate on Annex 1 bands where “ERC recommendation
70-03” gives the following limitations.
ERC recommendation 70-03
Band
Frequency band
(MHz)
Maximum
radiated power
(mW)
Channel spacing
(kHz)
Duty cycle
(%)
Annex1 g
863.0 – 870.0
25
=< 100 for 47 or more channels
100
Annex1 g1
868.0 – 868.6
25
No channel spacing specified
1
Annex1 g2
868.7 - 869.2
25
No channel spacing specified
0,1
Annex1g3
869.4 - 869.65
500
25 (for 1 or more channels)
10
Annex1g4
869.7 – 870.0
5
No channel spacing specified
100
These bands are free to use but the module and the user must respect some limitations. Most
of these restrictions are integrated in the conception of the module, except the duty cycle. For
example, the 869.400 to 869.650 MHz band is limited to a 10% duty cycle. This means that
each module is limited to a total transmit time of 6 minutes per hour.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 11 of 45
National Restrictions for non-specific SR devices Annex 1 band g1-g4:
Country
Restriction
Reason/Remark
Band G
Austria
Not Implemented
Planned
Finland Limited Implementation
Audio, video and voice not allowed -
Planned 2011
Georgia
Not Implemented
Greece
Limited Implementation
to 863-865 MHz
Lithuania Limited implementation
Only 863-868 MHz and duty cycle cannot
be increased to 1%
Norway
Not implemented
Russian
Federation Not Implemented
864-865 MHz with max e.r.p 25 mW,
duty cycle 0.1% or LBT. Forbidden to use
at the airports (aerodromes)
Spain
Limited implementation
to the band 863-868 MHz
Sweden
Not Implemented
The Netherlands
Not Implemented
Under study
Ukraine Limited implementation
863-865 / 868-868.6 / 868.6-868.7 /
869.2-869.25 MHz
Band G1
Georgia
Not Implemented
Russian
Federation
Not Implemented
Ukraine
Not Implemented
e.i.r.p. ≤25 mW
Band G3
Georgia
Not Implemented
Russian
Federation
Not Implemented
Ukraine
Not Implemented
Band G4
Finland
Limited implementation
Only 5mW e.r.p. - Planned 2011
Georgia
Not Implemented
Russian
Federation
Not Implemented
Ukraine
Not Implemented

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 12 of 45
2.3. Other Requirements
Furthermore, the module complies with the ETSI 300-220-2 standards (specific for SRD)
which main requirements are described in Appendix 1.
ME50-868 also complies which EN 13757-4 standards (Wireless M-Bus Part4).
Finally, the module complies with the new European Directive 2011/75/EU concerning the
Restrictive Usage of Hazardous Substances (RoHS 2).
2.4. Functional Requirements
The xE50-868 module is a complete solution from serial interface to RF interface. The xE50-
868 module has a digital part and a RF part. The radio link is a Half-Duplex bi-directional
link.
The digital part has the following functionalities:
•Communication interface
•I/O management
•Micro controller with embedded Telit Software Stack
The RF part has the following functionalities:
•Frequency synthesis
•Front-end
•Low noise reception
•Power amplification
•Packet handling
2.5. Software
The xE50-868 module is provided pre-flashed with one of the available Telit in-house
Protocol Stack.
Please refer to Protocol Stack User Guides [7] or [12] for detailed information.
2.6. Temperature
Requirements
Minimum
Typical
Maximum
Unit
Operating
Temperature - 40 25 + 85 °C
Relative humidity @
25°C
20 75 %
Storage
Temperature - 40 25 + 85 °C

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 13 of 45
3. General Characteristics
3.1. Mechanical
Characteristics
Size : Rectangular 25.8 x 15 mm
Height : 3 mm
Weight : 1.7 g
PCB thickness: 0.8 mm
Cover : •Dimensions: 21 x 14.2 x 2.2mm
•Thickness: 200µm
Components : All SMD components, on one side of the PCB.
Connectors : The terminals allowing conveying I/O signals are LGA
Mounting : •SMD
•LGA on the 4 external sides
Number of pins : 30

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 14 of 45
3.2. Mechanical dimensions
3.3. Recommended Land
pattern

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 15 of 45
3.4. DC Characteristics
Characteristics xE50
Min.
Typ.
Max.
Power Supply
(VDD): +2.0V +3.3V +3.6V
Consumption
xE50-868 - Transmission @ 10mW: 33mA 38mA
xE50-868 - Transmission @ 25mW: 45mA 50mA
Reception: 26mA 30mA
Stand-by (32.768 khz On): 1.5µA 3µA
Sleep (wake up on interruption): <1µA 1µA
I/O low level: GND - 0.2x VDD
I/O high level: 0.8x VDD - VDD

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 16 of 45
3.5. LE50-868 Functional
Characteristics
ERC/REC70-03
Frequency (MHz)
Band g
863.000 -870.000
Band M
EU Band 48
868.000 -868.600
Band N
EU Band 50
868.700 -869.200
Band P
EU Band 54b
869.400 -869.650
Band Q
EU Band 56a
869.700 -870.000
Global
RF data rate
(1): 4.8 kbps
(2): 9.6 kbps
Numbers of
channels
12 (1)
12 (2)
10 (1)
10 (2)
1 (1)
1 (2)
6 (1)
6 (2)
Channel width
50 kHz
50 kHz
250 kHz
50 kHz
Channel 0
868.025 MHz
868.725 MHz
869.525 MHz
869.725 MHz
Total Bandwidth
600 kHz
500 kHz
250 kHz
300 kHz
Transmission
Duty cycle
≤ 1%
≤ 1%
≤ 0.1%
≤ 10%
No requirement
Modulation
GFSK with ±7 kHz deviation (1)
GFSK with ±7 kHz deviation (2)
Max permitted
e.r.p
25 mW 25 mW 25 mW 500 mW 5 mW
e.r.p
8 levels from -8dBm to +14dBm (except for g4 band, 6 levels from -8dBm to 7dBm)
25 mW
25 mW
25 mW
25 mW
5 mW
Reception
Sensitivity
for PER < 10
-3
(1): Max - 109 dBm
(2): Max - 108 dBm
Remaining PER
< 1.10-6
Saturation
for PER < 10
-3
Up to - 10 dBm
The module uses values and methods required to comply with polite spectrum access as specified in clause
5.21.3 of EN 300 220 V3.1.1.
•Minimum CCA time = 4 msec
•Dead Time = < 1msec
•Randomize method = pseudo random algorithm with production signature row used as a seed (not
enabled by default, it must be enabled by customer using ATS227=1)
•Unit of deferral period = 1 msec
•Max and min deferral time = 4-67 msec (not enabled by default, it must be enabled by customer using
ATS227=1)
•Max tx time = 900 msec (max 256 bytes)
•Tx timeoff = 100 msec added by customer every 256 bytes
Therefore, DUTY CYCLE limitations as per Annex 1 band (band 48, 50 and 54b) must apply.
If we consider band 48, it means a max transmission time of <36s per hour
To fulfill the specification, integrator must count the frames to be transmitted and do not exceed 36s. For the
lower Data rate, it means not transmitting more than 90 frames per hour.

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 17 of 45
ERC/REC70-03
Frequency
(MHz)
Band g
863.000-870.000
Band M
EU Band 48
868.000-868.600
Band N
EU Band 50
868.700-869.200
Band P
EU Band 54b
869.400-869.650
Band Q
EU Band 56a
869.700-870.000
Global
RF data rate
(1): 19.2 kbps
(2): 38.4 kbps
(3): 115.2 kbps
Numbers of
channels
6 (1)
3 (2)
1 (3)
5 (1)
2 (2)
1 (3)
1 (1)
1 (2)
0 (3)
3 (1)
2 (2)
0 (3)
Channel width
100 kHz (1)
200 kHz (2)
600 kHz (3)
100 kHz (1)
200 kHz (2)
500 kHz (3)
250 kHz 100 kHz (1)
150 kHz (2)
Channel 0
868.050 MHz (1)
868.100 MHz (2)
868.300 MHz (3)
868.750 MHz (1)
868.850 MHz (2)
868.950 MHz (3)
869.5250 MHz 869.750 MHz (1)
869.775 MHz (2)
Total Bandwidth 600 kHz 500 kHz 250 kHz 300 kHz
Transmission
Duty cycle ≤ 1% ≤ 1% ≤ 0.1% ≤ 10% No requirement
Modulation
GFSK with ± 10 kHz deviation (1)
GFSK with ± 20 kHz deviation (2)
GFSK with ± 50 kHz deviation (3)
Max permitted
e.r.p 25 mW 25 mW 25 mW 500 mW 5 mW
e.r.p 8 levels from -8dBm to +14dBm (except for g4 band, 6 levels from -8dBm to 7dBm)
25 mW
25 mW
25 mW
25 mW
5 mW
Reception
Sensitivity
for PER < 10-3
(1): Max - 104 dBm
(2): Max - 101 dBm
(3): Max - 99 dBm
Remaining PER < 1.10-6
Saturation
for PER < 10-3 Up to - 10 dBm

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 18 of 45
ETSI EN 300 220
Transmission
Frequency error +/- 12.5 kHz @ 25 kHz channelization
+/- 87 kHz (100 ppm) > 25 kHz channelization
ACP - 37 dBm in 16 kHz BW under normal test conditions
- 32 dBm in 16 kHz BW under extreme test conditions
Modulation
bandwidth
Reference Bandwidth
(RBW) Limit Lower envelope point
Minimum frequency
Upper envelope point
maximum frequency
1 kHz - 30 dBm (1 μW) fe, lower fe, upper
1 kHz 36 dBm (250 nW) (fe, lower – 200 kHz)(fe, upper + 200 kHz)
10 kHz - 36 dBm (250 nW) (fe, lower – 400 kHz)(fe, upper + 400 kHz)
100 kHz - 36 dBm (250 nW) (fe, lower – 1 MHz)(fe, upper + 1 MHz)
Unwanted
emissions in the
spurious domain
Frequency 47 MHz to 74 MHz 7,5
MHz to 118 MHz 174
MHz to 230 MHz 470
MHz to 862 MHz
Other frequencies below
1 000 MHz Frequencies above 1 000 MHz
State
Operating - 54 dBm (4 nW) - 36 dBm (250 nW) - 30 dBm (1 μW)
Standby - 57 dBm (2 nW) - 57 dBm (2 nW) - 47 dBm (20 nW)
Reception
Blocking for class 2
equipments
Frequency offset of the unwanted
signal Receiver bandwidth Minimum offset between wanted and unwanted signals
+/-2 MHz
10 kHz ≥ 37 dB
100 kHz ≥ 27 dB
250 kHz ≥ 23 dB
+/-10 MHz
10 kHz ≥ 62 dB
100 kHz ≥ 52 dB
250 kHz ≥ 48 dB
spurious radiation Below 1000 MHz Above 1000 MHz
- 57 dBm (2 nW) - 47 dBm (20 nW)

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 19 of 45
3.6. ME50-868 Functional
Characteristics
M-Bus (Meter-Bus) is a European Standard for remote reading of gas, water or electricity
meters.
M-Bus is also usable for other types of consumption meters.
The M-Bus interface is made for communication on two wires, making it very cost effective.
This protocol exists with several physical layers such as paired wires, optical fiber or radio
link.
The radio variant of M-Bus is called Wireless M-Bus and is specified in EN 13757-4.
It is dedicated to the European ISM frequency bands at 169, 433 and 868 MHz.
It means that modules embedding the Wireless M-bus stack must comply with the general
SRD standard EN 300 220.
ME50-868 supports S, T, and C modes designed for the 868 MHz frequency band.
DUTY CYCLE limitations as per Annex 1 band (band 48, 50 and 54b) must apply.
If we consider band 48, it means a max transmission time of <36s per hour.
To fulfill the specification, integrator must count the frames to be transmitted and do not
exceed 36s (band 48),

xE50-433/868 RF Module User Guide
1VV0300905 Rev.14 – 2018-103-16
Reproduction forbidden without written authorization from Telit
Communications S.p.A. - All Rights Reserved. Page 20 of 45
ERC/REC70-03
Frequency
(MHz)
Band g
863.000-870.000
Band M
EU Band 48
868.000-868.600
Band N
EU Band 50
868.700-869.200
Band P
EU Band 54b
869.400-869.650
Band Q
EU Band 56a
869.700-
870.000
Global
RF data rate
(1): 32,768 kbps
(2): 100 kbps
(3): 100 kbps
(4): 50 kbps
Numbers of
channels 1 (1) 1 (2)
1 (3) 1 (4)
Channel width 600 kHz 500 kHz 250 kHz
Channel 0 868.300 MHz 868.950 MHz 869.525 MHz
Total Bandwidth 600 kHz 500 kHz 250 kHz
Transmission
Duty cycle ≤ 1% ≤ 1% ≤ 0.1% ≤ 10% No requirement
Modulation
FSK with ± 50 kHz deviation (1)
FSK with ± 50 kHz deviation (2)
FSK with ± 45 kHz deviation (3)
GFSK with ± 25 kHz deviation (4)
Max permitted
e.r.p 25 mW 25 mW 25 mW 500 mW 5 mW
e.r.p 8 levels from -8dBm to +14dBm (except for g4 band, 6 levels from -8dBm to 7dBm)
25 mW
25 mW
25 mW
25 mW
5 mW
WMBUS
Modes S1/ S2
T2-other
T1-meter,
T2-meter,
C1-meter
C2-meter
C2-other
Rx bandwidth
S modes: 232KHz
T2: 208.4KHz
T/C modes :
208.4 kHz
C2: 112KHz
Reception
Sensitivity
for PER < 10-3
(1): Max - 103 dBm
(2/3): Max - 100 dBm
(4): Max - 101 dBm
Remaining PER < 1.10-6
Saturation
for PER < 10-3 Up to - 10 dBm