Telit Wireless Solutions M.2 N930 Series Installation manual

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
APPLICABILITY TABLE
PRODUCT
LN930
LN930-AP
HN930
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 2 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Notice
While reasonable efforts have been made to assure the accuracy of this document, Telit
assumes no liability resulting from any inaccuracies or omissions in this document, or from
use of the information obtained herein. The information in this document has been carefully
checked and is believed to be entirely reliable. However, no responsibility is assumed for
inaccuracies or omissions. Telit reserves the right to make changes to any products described
herein and reserves the right to revise this document and to make changes from time to time
in content hereof with no obligation to notify any person of revisions or changes. Telit does
not assume any liability arising out of the application or use of any product, software, or
circuit described herein; neither does it convey license under its patent rights or the rights of
others.
It is possible that this publication may contain references to, or information about Telit
products (machines and programs), programming, or services that are not announced in your
country. Such references or information must not be construed to mean that Telit intends to
announce such Telit products, programming, or services in your country.
Copyrights
This instruction manual and the Telit products described in this instruction manual may be,
include or describe copyrighted Telit material, such as computer programs stored in
semiconductor memories or other media. Laws in the Italy and other countries preserve for
Telit and its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the
copyrighted material. Accordingly, any copyrighted material of Telit and its licensors
contained herein or in the Telit products described in this instruction manual may not be
copied, reproduced, distributed, merged or modified in any manner without the express
written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed
to grant either directly or by implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a
product.
Computer Software Copyrights
The Telit and 3rd Party supplied Software (SW) products described in this instruction manual
may include copyrighted Telit and other 3rd Party supplied computer programs stored in
semiconductor memories or other media. Laws in the Italy and other countries preserve for
Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer
programs, including the exclusive right to copy or reproduce in any form the copyrighted
computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW
computer programs contained in the Telit products described in this instruction manual may
not be copied (reverse engineered) or reproduced in any manner without the express written
permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any
license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied
SW, except for the normal non-exclusive, royalty free license to use that arises by operation
of law in the sale of a product.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 3 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Usage and Disclosure Restrictions
License Agreements
The software described in this document is the property of Telit and its licensors. It is
furnished by express license agreement only and may be used only in accordance with the
terms of such an agreement.
Copyrighted Materials
Software and documentation are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the software or documentation may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language,
in any form or by any means, without prior written permission of Telit
High Risk Materials
Components, units, or third-party products used in the product described herein are NOT
fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control
equipment in the following hazardous environments requiring fail-safe controls: the operation
of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic
Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s)
specifically disclaim any expressed or implied warranty of fitness for such High Risk
Activities.
Trademarks
TELIT and the Stylized T Logo are registered in Trademark Office. All other product or
service names are the property of their respective owners.
Copyright © Telit Communications S.p.A. 2011.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 4 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Contents
1
Introduction ......................................................................................................... 10
1.1 Scope.......................................................................................................................... 10
1.2 Purpose...................................................................................................................... 10
1.3 Audience..................................................................................................................... 10
1.4 Contact Information, Support .................................................................................... 10
1.5 Document Organization ............................................................................................. 11
1.6 Text Conventions........................................................................................................ 11
1.7 Related Documents ................................................................................................... 11
2
M.2 Overview........................................................................................................ 13
2.1 SKUs - 2G/3G/LTE M.2 Modules................................................................................ 13
2.2 M.2 Module – Block Diagrams................................................................................... 17
2.2.1 M.2 HN930 Module.........................................................................................................17
2.2.2 M.2 LN930-AP Module ...................................................................................................19
2.2.3 M.2 LN930 Module .........................................................................................................20
2.3 Host Interface Signals ............................................................................................... 21
3
M.2 Module Interface Details ............................................................................... 26
3.1 USB 2.0 High-Speed – IPC Interface ......................................................................... 26
3.2 (U)SIM Interface ......................................................................................................... 27
3.3 GNSS Interface........................................................................................................... 27
3.4 System Control Interface........................................................................................... 30
3.4.1 Power On & Reset..........................................................................................................31
3.4.2 Host Radio Disable Operation ........................................................................................31
3.4.3 LED Interface – Status Indicator....................................................................................33
3.4.4 Wake on WWAN Signal...................................................................................................34
3.4.5 Dynamic Power Reduction.............................................................................................35
3.5 Tunable Antenna Control Interface ........................................................................... 37
3.6 In-Device Coexistence Interface................................................................................ 38
3.7 Power Supply Interface.............................................................................................. 40
3.8 Trace & Debug Interface............................................................................................ 40
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 5 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
3.9 Configuration Pins ..................................................................................................... 41
3.10 Reserved Pins ............................................................................................................ 41
3.11 No Connect Pins......................................................................................................... 42
3.12 Antenna Interface ...................................................................................................... 42
4
Development Tools............................................................................................... 44
4.1 Carrier Board ............................................................................................................. 44
4.1.1 FlashTool........................................................................................................................45
4.1.2 PhoneTool ......................................................................................................................45
4.1.3 System Trace Tool..........................................................................................................46
4.1.4 RF Calibration ................................................................................................................46
4.1.5 Noise Profiling Scan Tool...............................................................................................47
4.1.6 GNSS Tools ....................................................................................................................48
5
Windows Software Components ........................................................................... 49
5.1 MBIM Toolkit .............................................................................................................. 50
5.1.1 Windows® 7 MBIM driver ..............................................................................................50
5.1.2 GNSS UMDF driver for Windows® 7 and Windows® 8.................................................50
5.1.3 M.2 module Firmware Update .......................................................................................50
5.1.4 End User Trace Tool.......................................................................................................50
6
Modem Configuration on Linux Based PC............................................................. 51
6.1 Overview..................................................................................................................... 51
6.2 CMUX Multiplexer ...................................................................................................... 52
6.3 USB 2.0 HS Features.................................................................................................. 53
6.4 USB Configuration ..................................................................................................... 53
6.4.1 Modem Connection ........................................................................................................53
6.4.2 Network Connection ......................................................................................................53
6.4.3 Default Configuration.....................................................................................................54
6.5 LPM ............................................................................................................................ 54
6.5.1 Suspend/Resume and Remote Wake-up.......................................................................54
7
Operating Environment ........................................................................................ 55
8
Power Delivery Requirements.............................................................................. 56
8.1 Electrical Parameters – 3.3 V Power Supply............................................................. 56
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 6 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
8.2 Electrical Parameters - Host Interface Signals ........................................................ 57
8.3 Power Consumption................................................................................................... 58
9
Other Information ................................................................................................ 60
9.1 EMI/EMC and Platform Noise.................................................................................... 60
9.2 Platform Noise Mitigation - Adaptive Clocking ......................................................... 60
9.3 Thermal Monitoring ................................................................................................... 60
9.4 Seamless Roaming / Wifi Offload .............................................................................. 61
9.5 Conducted Transmit Power ....................................................................................... 61
9.6 Conducted Receiver Sensitivity.................................................................................. 61
9.7 Antenna Recommendations ...................................................................................... 62
10
WWAN Card Type 3042-S3-B............................................................................. 64
10.1 Mechanical Dimensions............................................................................................. 64
10.2 Land Pattern .............................................................................................................. 66
10.3 Antenna Connector Locations ................................................................................... 68
11
Safety Recommendations.................................................................................. 69
12
Conformity assessment issues.......................................................................... 70
12.1 1999/5/EC Directive ................................................................................................... 70
12.2 CE RF Exposure Compliance..................................................................................... 72
12.3 R&TTE Regulation:..................................................................................................... 73
13
FCC/IC Regulatory notices ................................................................................ 74
13.1 Modification statement .............................................................................................. 74
13.2 Interference statement.............................................................................................. 74
13.3 FCC Class B digital device notice .............................................................................. 74
13.4 Radiation Exposure Statement.................................................................................. 75
13.5 End Product Labeling ................................................................................................ 75
14
Document History ............................................................................................. 76
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 7 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Figure 1 M.2 HSPA+ Block Diagram................................................................................................................18
Figure 3 M.2 LTE Module Block Diagram........................................................................................................19
Figure 4 M.2 LTE Module Block Diagram........................................................................................................20
Figure 5 Detailed Interconnection of M.2 LTE Modem RF Engine..................................................................21
Figure 6 PCI Express M.2 Module Interface .....................................................................................................22
Figure 7 GNSS Connections and Interface ........................................................................................................29
Figure 8 Typical LED Connection.....................................................................................................................34
Figure 9 Antenna Control – Connections Detail................................................................................................37
Figure 10 In-Device Coexistence Architecture..................................................................................................38
Figure 11 RF Antenna – Coaxial Connector Location.......................................................................................43
Figure 12 M.2 Carrier Board..............................................................................................................................45
Figure 13 Windows Software Architecture........................................................................................................49
Figure 14 Linux Software Architecture .............................................................................................................51
Figure 15 WWAN Card 3042 Top/Bottom-View..............................................................................................64
Figure 16 WWAN Card 3042 Edge-View.........................................................................................................65
Figure 17 WWAN Card Type 3042 Top-Side Mounting Land Pattern with Key Removed.............................66
Figure 18 WWAN Card 3042 Mid-plane Land Pattern with Key Removed .....................................................67
Figure 19 Antenna Connector Location.............................................................................................................68
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 8 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Table 1 M.2 Module - General Feature..............................................................................................................14
Table 2. M.2 Module - RF Band Support.........................................................................................................15
Table 3. M.2 Module - Data Services...............................................................................................................17
Table 4 M.2 Host Interface Signals....................................................................................................................22
Table 5 USB HS Interprocessor Communications In
ter face..............................................................................26
Table 6 (U)SIM Interface Signals......................................................................................................................27
Table 7 X-GOLD™ Baseband to GNSS Interface Signals................................................................................30
Table 8 GNSS Module Interface Signals...........................................................................................................30
Table 9 Power-on & Reset Signals ....................................................................................................................31
Table 10 Radio Disable Signal...........................................................................................................................32
Table 11 Host Radio Disable Interface (W_DISABLE#)..................................................................................33
Table 12 LED#1 Signal......................................................................................................................................33
Table 13 LED State Indicator............................................................................................................................34
Table 14 Wake on WWAN Signal.....................................................................................................................35
Table 15 DPR#/ SAR Support Signal................................................................................................................36
Table 16 Tunable Antenna Control Signals.......................................................................................................37
Table 17 Coexistence – Hardware Synchronization Signals..............................................................................39
Table 18 Power & Ground Signals ....................................................................................................................40
Table 19 M.2 Configuration Pins.......................................................................................................................41
Table 20 Reserved Pins......................................................................................................................................41
Table 21 No Connect Pins .................................................................................................................................42
Table 22 Antenna Requirements........................................................................................................................42
Table 23 Operating Environment.......................................................................................................................55
Table 24 M.2 Module Power Delivery Requirements - Ultrabook....................................................................56
Table 25 VBAT Power Delivery Requirements – Direct Connections (Tablet)................................................56
Table 26 Electrical Parameters – Host Interface Signals...................................................................................57
Table 27 LTE Power Consumption....................................................................................................................58
Table 28 UMTS Power Consumption................................................................................................................58
Table 29 GSM Power Consumption..................................................................................................................58
Table 30 Conducted Transmit Power.................................................................................................................61
Table 31 Antenna Recommendation..................................................................................................................62
Table 32 Antenna Recommendation - Bandwidth of Main & Diversity Antenna.............................................62
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 9 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
1
Introduction
This document is a technical specification for Telit’s next generation form factor M.2 module
family. The next generation form factor M.2 module family is a natural transition from the
PCI Express Mini Card and Half Mini Card to a smaller form factor size.
The M.2 Card Type 3042 offers single sided component mounting, 75 pins (8 dedicated for
key), in a compact size (30 mm x 42 mm). A range of 2G/3G/4G (LTE) M.2 modules
supporting multiple operating systems and unique features in the WWAN Card Type 3042
form factor are available.
1.1
Scope
The document will cover the features of the M.2 modules presently available. It will also
identify the M.2 module application interface along with hardware, software, reliability, and
mechanical specifications.
1.2
Purpose
The intent of this document is to provide design guidelines and information for each M.2
module.
In addition to the M.2 module family features and performance metrics, this document
describes the interface signals, operating conditions, physical and mechanical requirements of
the M.2 cards.
1.3
Audience
This document is intended for editors who are about to write or edit documentation for Telit.
1.4
Contact Information, Support
For general contact, technical support, to report documentation errors and to order manuals,
contact Telit Technical Support Center (TTSC) at:
TS-[email protected]
[e-mail]
[e-mail]
[e-mail]
Alternatively, use:
http://www.telit.com/en/products/technical-support-center/contact.php
For detailed information about where you can buy the Telit modules or for recommendations
on accessories and components visit:
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 10 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
http://www.telit.com
To register for product news and announcements or for product questions contact Telit
Technical Support Center (TTSC).
Our aim is to make this guide as helpful as possible. Keep us informed of your comments and
suggestions for improvements.
Telit appreciates feedback from the users of our information.
1.5
Document Organization
This document contains the following chapters (sample):
“Chapter 1: “Introduction” provides a scope for this document, target audience, contact and
support information, and text conventions.
“Chapter 2: “Chapter two”gives an overview of the features of the product.
“Chapter 3: “Chapter three”describes in details the characteristics of the product.
“Chapter 6: “Conformity Assessment Issues” provides some fundamental hints about the
conformity assessment that the final application might need.
“Chapter 7: “Safety Recommendation” provides some safety recommendations that must be
follow by the customer in the design of the application that makes use of the AA99-XXX.
1.6
Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily
injury may occur.
Caution or Warning – Alerts the user to important points about integrating the module, if
these points are not followed, the module and end user equipment may fail or malfunction.
Tip or Information – Provides advice and suggestions that may be useful when
integrating the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.
1.7
Related Documents
•TBA
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 11 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 12 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
2
M.2 Overview
This section will provide an overview of the standard features of a M.2 Card, information on
the various SKUs of 2G/3G/4G (LTE) M.2 modules along with a respective functional block
diagram of each SKU.
2.1
SKUs - 2G/3G/LTE M.2 Modules
There are five different M.2 modules available in the M.2 Card Type 3042 form factor:
•HN930 - HSPA+
•LN930-AP - APAC LTE
•LN930 - LTE
A comparison of the features, RF band Support, and data rates for the various M.2 modules is
shown in Table 1 through Table 3
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 13 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Table 1 M.2 Module - General Feature
Feature
Description
Additional Information
M.2 module
HN930
LN930-AP
LN930
Mechanical
M.2 Card Type 3042
Slot B
30 mm x 42 mm
Pin count: 75
(67 usable, 8 slot) x x x
Operating
Voltage
3.3 V Typical
-
x x x
Operating
Temperature
-10˚C to +55˚C – Normal
+55˚C to +70˚C –
Extended
E
xtreme - This is the
surrounding air temperature of
the module inside the platform
when the card is fully operating
at worst case condition
x x x
Application
Interface
(75 pin card)
USB 2.0 High-speed
Interprocessor
Communications x x x
USIM w/ Card Detect
SIM_CLK, SIM_RESET,
SIM_IO, SIM_PWR,
SIM_DETECT
x x x
M.2 Control
Full_Card_Power_On_Off
x x x
Reset#
x
x
x
W_DISABLE#
x x x
LED #1
x
x
x
DPR (Body SAR)
x x x
Wake on WWAN
x
x
x
GNSS Disable
x x x
Global Positioning
(GPS/ GLONASS)
I2C_SCL, I2C_SDA, I2_IRQ,
CLKOUT, TX_BLANKING x x x
Antenna Tuning
(4) GPO (RF Transceiver)
- x x
RF Coexistence
(3) GPIO
-
x
x
RF Antenna
Main & Diversity/ GNSS
Separate coax connectors
x x x
Debug
JTAG
-
x
x
x
ETM11
-
-
x
x
MIPI PTI
-
- x X
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 14 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Table 2. M.2 Module - RF Band Support
RF Band
UE Transmit
UE Receive
M.2 Module
HN930
LN930-AP
LN930
GSM
UMTS
LTE
GSM
UMTS
LTE
GSM
UMTS
LTE
001 I
1920 MHz -
1980 MHz
2110 MHz -
2170 MHz x x x x x
002 II
1850 MHz -
1910 MHz
1930 MHz -
1990 MHz x x x x x
003 III
1710 MHz -
1785 MHz
1805 MHz -
1880 MHz x x x x
004 IV
1710 MHz -
1755 MHz
2110 MHz -
2155 MHz x x x
005 V
824 MHz -
849 MHz
869 MHz -
894 MHz x x x x x
006 VI
830 MHz -
840 MHz
875 MHz -
885 MHz x
007 VII
2500 MHz -
2570 MHz
2620 MHz -
2690 MHz x
008 VIII
880 MHz -
915 MHz
925 MHz -
960 MHz x x x x x x x
009 IX
1749.9 MHz -
1784.9 MHz
1844.9 MHz -
1879.9 MHz x x
010 X
1710 MHz -
1770 MHz
2110 MHz -
2170 MHz
011 XI
1427.9 MHz -
1447.9 MHz
1475.9 MHz -
1495.9 MHz x x
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 15 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
012 XII
699 MHz -
716 MHz
729 MHz -
746 MHz
013 XIII
777 MHz -
787 MHz
746 MHz -
756 MHz x
014 XIV
788 MHz -
798 MHz
758 MHz -
768 MHz
017 XVII
704 MHz -
716 MHz
7734 MHz -
746 MHz x
018 XVIII
815 MHz -830
MHz
860 MHz -875
MHz x x
019 XIX
830 MHz -
845 MHz
875 MHz -
890 MHz x x
020 XX
832 MHz -
862 MHz
791 MHz -
821 MHz x
021 XXI
1447.9 MHz -
1462.9 MHz
1495.9 MHz -
1510.9 MHz x
022 XXII
3410 MHz -
3490 MHz
3510 MHz -
3590 MHz
023 XXIII
2000 MHz -
2020 MHz
2180 MHz -
2200 MHz
024 XXIV
1626.5 MHz -
1660.5 MHz
1525 MHz -
1559 MHz
025 XXV
1850 MHz -
1915 MHz
1930 MHz -
1995 MHz
026 XXVI
814 MHz -
849 MHz
859 MHz -
894 MHz x
027 XXVII
806 MHz -
824 MHz
851 MHz -
869 MHz
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 16 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
028 XXVIII
703 MHz -
748 MHz
758 MHz -
803 MHz
029 XXIX
1850 MHz -
1910 MHz
or
1710 MHz -
1755 MHz
716 MHz -
728 MHz
001 I
1920 MHz -
1980 MHz
2110 MHz -
2170 MHz
Table 3. M.2 Module - Data Services
Data Service
M.2 module
HN930
LN930-AP
LN930
GPRS Class 33: DL 85.6 kbps, UL 85.6 kbps
x
-
x
EDGE Class 33: DL 236.8 kbps, UL 236.8 kbps
x
-
x
WCDMA: DL 384 kbps, UL 384 kbps
x
x
x
HSPA+: DL 21 Mbps, UL 5.7 Mbps
x
x
x
HSPA+: DL 42 Mbps, UL 5.7 Mbps
-
x
x
LTE FDD: DL: 100 Mbps, UL 50 Mbps
-
x
x
2.2
M.2 Module – Block Diagrams
2.2.1
M.2 HN930 Module
The M.2 HSPA+ module is Intel’s Next Generation Form Factor design based on Intel’s
XMM™6260 modem platform. The M.2 HSPA+ card is a dual-mode (UMTS/GSM) 3GPP
release 7 HSPA+ modem.
The M.2 HSPA+ module includes support at the 75 pin application interface for
M.2 Control, USB 2.0 HS, GNSS, and USIM. Antenna Tuning is not supported.
A block diagram of the M.2 HSPA+ module is shown in Figure 1.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 17 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
Figure 1 M.2 HSPA+ Block Diagram
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 18 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
2.2.2
M.2 LN930-AP Module
The M.2 APAC LTE module is another Intel design based on the XMM™7160 modem
platform. The module has a targeted area of operation in the Asia Pacific rim and offers 3G
and LTE datacard functionality, 2G Functionality is not supported.
The M.2 APC LTE module includes support at the 75 pin application interface for M.2
Control, USB 2.0 HS, GNSS, USIM and Antenna Tuning.
A block diagram of the M.2 APAC LTE module is shown in Figure 2.
Figure 2 M.2 APAC LTE Module Block Diagram
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 19 of 77

xN930 M.2 Hardware User Guide
1VV0301078 Rev.6 – 2013-11-12
2.2.3
M.2 LN930 Module
The M.2 LTE module is based on Intel’s XMM™7160 modem platform. The M.2 LTE
module isatriple-mode (2G, 3G, and 4G) 3GPP release 9 modem providing datacard
functionality.
The M.2 LTE module includes support at the 75 pin application interface for
M.2 Control, USB 2.0 HS, GNSS, USIM and Antenna Tuning.
A block diagram of the M.2 LTE module is shown in Figure 3.
Figure 3 M.2 LTE Module Block Diagram
A more detailed interconnect diagram of the RF Engine utilized on the M.2 LTE Module is
shown in Figure 4.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 20 of 77