Terex Genie GS-1932m Lite Installation and operating manual

Service and Repair Manual
Serial Number Range
GS
™
-1330m
Refer to inside cover
This manual includes:
Repair procedures
Fault Codes
Electrical and
Hydraulic Schematics
GS
™
-1432m/1932m
GS
™
-1932m Lite/1932m XH
GS
™
-1530/1532
GS
™
-1930/1932/1932 XH
For detailed maintenance
procedures, refer to the
appropriate Maintenance
Manual for your machine.
GS™-2032/2632/3232
GS
™
-2046/2646/3246/4046
GS
™
-2646 XH/3246 XH
GS
™
-4655
Part No. 1309020GT
Rev B
August 2021

Service and Repair Manual August 2021
Introduction
ii GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Intro ductio n Intro ductio n
Compliance
Machine Classification
Group A/Type 3 as defined by ISO 16368
Machine Design Life
Unrestricted with proper operation, inspection
and scheduled maintenance.
Contact Us:
Internet: www.genielift.com
E-mail: [e-mail]
Find a Manual for this Model
Go to http://www.genielift.com
Use the links to locate Service Manuals,
Maintenance Manuals, Service and Repair
Manuals, Parts Manuals and Operator's
Manuals.
Copyright © 2020 by Terex Corporation
1309020GT Rev B, August 2021
Second Edition, Second Printing
Genie is a registered trademark of Terex South Dakota,
Inc. in the U.S.A. and many other countries.
“GS” is a trademark of Terex South Dakota, Inc.
Serial Number Range
Use the following chart to identify the specific
serial number for models included in this
manual.
Models
Serial number
GS
-1330m
from
GS30MD-101
GS
-1432m, GS-1932m
GS
-1932m XH,
GS
-1932m Lite
from GS32MD
-101
from GS32MP
-101
GS
-1530/1532
GS
-1930/1932, GS-1932 XH
from GS30D
-40101
from GS30P
-200101
GS
-2032/2632/3232
from GS32D-10101
from GS32P
-200101
GS
-2046/2646/3246/4046
GS
-2646 XH / GS-3246 XH
from GS46D
-20101
from GS46P
-200101
GS
-4655 from GS55D-101
from GS55F-101

August 2021 Service and Repair Manual
Introduction
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 iii
Revision History
Revision Date Section Procedure / Page / Description
A 3/2021 Initial Release
B 6/2021 All Sections Add GS1432m, 1932m, 1932m XH, 1932m Lite
Reference Examples:
Electronic Version
Click on any content or procedure in the Table of Contents to view
the update.
Section – Repair Procedure, 4-2
Section – Fault Codes, All charts
Section – Schematics, Legends and schematics

Service and Repair Manual August 2021
Introduction
iv GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Revision History(continued)
Revision Date Section Procedure / Page / Description
Reference Examples:
Electronic Version
Click on any content or procedure in the Table of Contents to view
the update.
Section – Repair Procedure, 4-2
Section – Fault Codes, All charts
Section – Schematics, Legends and schematics

August 2021 Service and Repair Manual
Introduction
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 v
Serial Number Legend
GS-1432m, GS-1932m, GS-1932m XH, GS1932m Lite
1 Model
2 Facility code
3 Sequence number
4 Serial label located on chassis
5 Serial number (stamped on chassis)
All other models
Model:
Serial number:
Electrical schematic number:
Year of manufacture:
Machine unladen weight:
Rated work load (including occupants):
Maximum number of platform occupants:
Maximum allowable inclination of the chassis:
GS30P-123456
GS30 P - 123456
12 3
Outrigger retracted:
Outrigger deployed:
5
5
4
5
4
5

Service and Repair Manual August 2021
Safety Rules
vi GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Sec ti on 1 Safety R ul es
Danger
Failure to obey the instructions and safety rules in
this manual and the appropriate Operator's Manual
on your machine will result in death or serious
injury.
Many of the hazards identified in the operator's
manual are also safety hazards when
maintenance and repair procedures are
performed.
Do not modify or alter a MEWP without prior
written permission from the manufacturer.
Do Not Perform Maintenance
Unless:
You are trained and qualified to perform
maintenance on this machine.
You read, understand and obey:
•manufacturer's instructions and safety rules
•employer's safety rules and worksite
regulations
•applicable governmental regulations
You have the appropriate tools, lifting
equipment and a suitable workshop.

August 2021 Service and Repair Manual
Safety Rules
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 vii
Personal Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your top priority.
Read each procedure thoroughly. This
manual and the decals on the machine,
use signal words to identify the following
:
Safety alert symbol
—used to
alert personnel to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
Indicates a imminently hazardous
situation which, if not avoided,
will
result in death or serious
injury.
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious
injury.
Indicates a potentially hazardous
situation which, if not avoided,
may cause minor or moderate
injury.
Indicates a potentially hazardous
situation which, if not avoided,
may result in property damage.
Be sure to wear protective eye wear and
other protective clothing if the situation
warrants it.
Be aware of potential crushing hazards
such as
moving parts, free swinging or
unsecured components when lifting or
placing loads. Always wear approved
steel
-toed shoes.
Workplace Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your top priority.
Be sure to keep sparks, flames and
lighted tobacco away from flammable and
combustible materials like battery gases
and engine fuels. Always have an
approved fire extinguisher within easy
re
ach.
Be sure that all tools and working areas
are properly maintained and ready for
use. Keep work surfaces clean and free
of debris that could get into machine
components and cause damage.
Be sure any forklift, overhead crane or
other lifting or
supporting device is fully
capable of supporting and stabilizing the
weight to be lifted. Use only chains or
straps that are in good condition and of
ample capacity.
Be sure that fasteners intended for one
time use (i.e., cotter pins and self
-locking
nu
ts) are not reused. These components
may fail if they are used a second time.
Be sure to properly dispose of old oil or
other fluids. Use an approved container.
Please be environmentally safe.
Be sure that your workshop or work area
is
properly ventilated and well lit.

August 2021
Table of Contents
viii GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Introduction Introduction...................................................................................................... ii
Find a Manual for this Model ...............................................................................ii
Serial Number Range..........................................................................................ii
Revision History .................................................................................................iii
Serial Number Legend ....................................................................................... v
Section 1 Safety Rules .................................................................................................... vi
General Safety Rules .........................................................................................vi
Section 2 Specifications................................................................................................... 1
Machine Specifications....................................................................................... 1
Performance Specifications................................................................................ 4
Hydraulic Oil Specifications ................................................................................ 5
Hydraulic Component Specifications .................................................................. 9
Manifold Component Specifications.................................................................. 12
Hydraulic Hose and Fitting Torque Specifications ............................................. 13
Torque Procedure ............................................................................................ 14

August 2021
Table of Contents
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 ix
Section 3 Repair Procedures..........................................................................................16
Introduction ......................................................................................................16
Platform Controls ...........................................................................................18
1-1 Circuit Board ..............................................................................................20
1-2 Joystick ......................................................................................................21
1-3 Platfrom Controls Alarm..............................................................................21
1-4 Platform Emergency Stop Button................................................................22
Ground Controls.............................................................................................23
2-1 Software Revision Level .............................................................................24
2-2 Machine Setup ...........................................................................................25
2-3 Loading or Updating Machine Software ......................................................26
2-4 Using a Wi-Fi Router to Connect to the SmartLink Web Service Tool..........31
2-5 Service Override Mode ...............................................................................33
2-6 Level Sensors ............................................................................................35
2-7 Manual Platform Lowering Cable ................................................................40
2-8 Outrigger Calibration - GS-3232 .................................................................42
Hydraulic Tank................................................................................................43
3-1 Hydraulic Tank ...........................................................................................43
Hydraulic Pump ..............................................................................................45
4-1 Hydraulic Pump ..........................................................................................45

August 2021
Table of Contents
x GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Manifolds........................................................................................................ 47
5-1 Function Manifold Components – GS-1330m ............................................. 47
5-2 Function Manifold Components –
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH ........................... 48
5-3 Function Manifold Components – GS-3232 ................................................ 49
5-4 Function Manifold Components – GS-4655 ................................................ 50
5-5 Function Manifold Components –
Models with electric drive, All other models............................................... 51
5-6 Function Manifold Components – Models with hydraulic drive,
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH.............................. 52
5-7 Check Valve Manifold Components – Models with hydraulic drive,
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH.............................. 54
5-8 Function Manifold Components –
Models with hydraulic drive, GS-2032, GS-2632 ....................................... 55
5-9 Outrigger Manifold Components - GS-3232................................................ 57
5-10 Outrigger Cylinder Manifold Components – GS-3232................................ 58
5-11 Valve Adjustments – Function Manifold .................................................... 59
How to Adjust the System Relief Valve - Models with electric drive.............. 59
How to Adjust the System Relief Valve - Models with hydraulic drive ........... 60
How to Adjust the Platform Lift Relief Valve - Models with hydraulic drive .... 61
How to Adjust the Steer Relief Valve -
Models with hydraulic drive (includes GS-1330m electric drive)............ 63
5-12 Valve Coils............................................................................................... 64

August 2021
Table of Contents
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 xi
Steer Axle Components .................................................................................67
6-1 Yoke Assembly...........................................................................................67
6-2 Drive Motors...............................................................................................68
6-3 Steer Cylinder ............................................................................................69
6-4 Steer Bellcrank ...........................................................................................69
6-5 Manual Brake Release - Models with electric drive......................................70
6-6 Thrust Washers -
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH............................71
Non-Steer Axle Components .........................................................................72
7-1 Drive Brake - Models with hydraulic drive....................................................72
Brake Release Hand Pump Components ......................................................73
8-1 Brake Release Hand Pump Components - Models with Hydraulic Drive......73
Scissor Components......................................................................................74
9-1 Scissor Assembly - GS-1330m ...................................................................75
9-2 Scissor Assembly - GS-1432m ...................................................................83
9-3 Scissor Assembly - GS-1530, GS-1532 ......................................................86
9-4 Scissor Assembly - GS-1930, GS-1932, GS-1932 XH.................................92
9-5 Scissor Assembly - GS-1932m, GS-1932m Lite, GS-1932m XH ...............100
9-6 Scissor Assembly - GS-2032, GS-2046 ....................................................103
9-7 Scissor Assembly - GS-2632, GS-2646, GS-2646 XH...............................110
9-8 Scissor Assembly - GS-3232, GS-3246, GS-3246 XH...............................117
9-9 Scissor Assembly - GS-4046 ....................................................................126
9-10 Scissor Assembly - GS-4655 ..................................................................135

August 2021
Table of Contents
xii GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
9-11 Scissor Arm Wear Pads ......................................................................... 139
How to Replace the Scissor Arm Wear Pad -
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH .................... 139
How to Replace the Scissor Arm Wear Pad - All other models................... 140
9-12 Platform Height Sensor .......................................................................... 142
How to Disassemble the Platform Height Sensor Assembly -
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH .................... 142
How to Disassemble the Platform Height Sensor Assembly -
All other models................................................................................. 143
9-13 Lift Cylinder............................................................................................ 145
9-14 Pressure Transducer.............................................................................. 157
9-15 Platform Overload System...................................................................... 158
9-16 Platform Overload Recovery................................................................... 163
9-17 Outdoor Height Limiting.......................................................................... 165
Platform Components.................................................................................. 167
10-1 Platform ................................................................................................. 167
How to Remove the Platform -
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH .................... 167
How to Remove the Platform - All other models......................................... 168
10-2 Platform Extension Deck ........................................................................ 169
Battery Charger............................................................................................ 170
11-1 Battery Charger...................................................................................... 170
Selecting a Charge Profile......................................................................... 171
Power Cables ............................................................................................... 172
12-1 Drive Morot Power Cables...................................................................... 172
How to Replace a Drive Motor Power Cable -
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH .................... 172

August 2021
Table of Contents
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 xiii
Section 4 Diagnostics...................................................................................................175
Introduction ....................................................................................................175
GCON I/O Map - Models without outriggers ....................................................178
GCON I/O Map - Models with outriggers .........................................................179
Operation Indicator Codes (OIC) ....................................................................181
Diagnostic Trouble Codes (DTC) ....................................................................182
Troubleshooting "HXXX" and "PXXX" Faults...................................................183
Fault Inspection Procedure.............................................................................184
Type "HXXX" Faults .......................................................................................186
Type "PXXX" Faults........................................................................................190
Type "UXXX" Faults .......................................................................................193
Type "FXXX" Faults........................................................................................196
Type "CXXX" Faults .......................................................................................199
Battery Charger..............................................................................................201
Charger Fault Codes .................................................................................202
Charger Error Codes .................................................................................203
Section 5 Schematics ...................................................................................................207
Introduction ....................................................................................................207
Electrical Component and Wire Color Legends ...............................................208
Wiring Diagram Ground and Platform Controls ...............................................210
Limit Switch Legend .......................................................................................211
Electrical Symbol Legend ...............................................................................213
Hydraulic Symbols Legend .............................................................................214

August 2021
Table of Contents
xiv GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Hydraulic Schematics.................................................................................. 215
Hydraulic Schematic, GS-1330m (from GS30MD-101) ................................... 216
Hydraulic Schematic, GS-1432m, GS-1932m, GS-1932m Lite,
GS-1932m XH (from GS32MD-101)........................................................ 217
Hydraulic Schematic, Models with electric drive
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH
(from GS30D-40101, GS30P-200101) .................................................... 220
Hydraulic Schematic, Models with hydraulic drive
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH
(from GS30D-40101, GS30P-200101) .................................................... 221
Hydraulic Schematic, Models with electric drive GS-2032, GS-2632,
GS-3232, GS2046, GS-2646, GS-2646 XH, GS-3246, GS-3246 XH
(from GS32D-10101, GS32P-200101, GS46D-20101, GS46P-200101) .. 224
Hydraulic Schematic, Models with hydraulic drive GS-2032, GS-2632
(from GS32D-10101, GS32P-200101) .................................................... 225
Hydraulic Schematic, Outriggers GS3232
(from GS32D-10101, GS32P-200101) .................................................... 228
Hydraulic Schematic, GS-4046 (from GS46D-20101, GS46P-200101) ........... 229
Hydraulic Schematic, GS-4655 (from GS55D-101) ......................................... 232
Electrical Schematics .................................................................................. 233
Electrical Schematic, GS-1330m (from GS30MD-40101)................................ 234
Electrical Schematic, GS-1432m, GS-1932m,
GS-1932m Lite, GS-1932m XH (from GS32MD-101) .............................. 235
Electrical Schematic, GS-3232 (from GS32D-10101, GS32P-200101)............ 238
Electrical Schematic, GS-4655 (from GS55D-10101)...................................... 239
Electrical Schematic, All other models Models with electric drive
(from GS30D-40101, GS30P-200101, GS32D-10101,
GS32P-200101, GS32MD-101, GS46D-20101, GS46P-200101) ............ 242
Electrical Schematic, All other models Models with hydraulic drive
(from GS30D-40101, GS30P-200101, GS32D-10101, GS32P-200101) .. 243
Electrical Schematics – Options ................................................................. 245
Electrical Schematic, Options......................................................................... 246

August 2021 Service and Repair Manual
Specifications
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 1
Sec ti on 2 Speci fic ati o ns
Machine Specifications
For operational specifications, refer to the
Operator's Manual.
Batteries, Standard GS-1330m
Voltage
12V DC
Group
24
Type
24TMX
Quantity
2
Battery capacity, maximum
85AH
Reserve capacity @ 25A rate
140 m
inutes
Weight, each
46 l
bs
21 k
g
Batteries, Standard GS
-1432m, GS-1932m, GS-
1932m Lite, GS-1932 XH
Voltage
12V DC
Group
24
Type
27TMH
Quantity
2
Battery capacity, maximum
115AH
Reserve capacity @ 25A rate
131 m
inutes
Weight, each
62 l
bs
28 k
g
Batteries, Standard GS-4046, GS-4655
Voltage 12V DC
Group GC12
Type T1275
Quantity
4
Battery capacity, maximum C20 = 150AH
Reserve capacity @ 25A rate 280 minutes
Weight, each 82 lbs
37 kg
Batteries, Standard All other models
Models with hydraulic drive
Voltage
6V DC
Group
GC2
Type
T-
105
Quantity
4
Battery capacity, maximum
C20 = 225AH
Reserve capacity @ 25A rate
447 minutes
Weight, each
62 l
bs
28 k
g
Batteries, Standard All other models
Models with electric drive
Voltage
6V DC
Group
GC2
Type
T-
605
Quantity
4
Battery capacity, maximum
C20 =
210AH
Reserve capacity @ 25A rate
383 m
inutes
Weight, each
58 l
bs
26,5 k
g
Batteries, Maintenance-free (option) GS-1330m
Voltage
12V DC
Group
24
Type
DC85-12
Quantity
2
Battery capacity, maximum
85AH
Reserve capacity @ 25A rate
145 m
inutes
Weight, each
57 l
bs
26 kg

Service and Repair Manual August 2021
Specifications
2 GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Batteries, Maintenance-free (option)
GS-1432m, GS-1932m, GS-1932m Lite, GS-1932m XH
Voltage
12V DC
Group
24
Type
EV31A-
B
Quantity
2
Battery capacity, maximum
115AH
Reserve capacity @ 25A rate
178 m
inutes
Weight,
each 70 l
bs
32 k
g
Batteries, Maintenance-free (option)
GS-4046, GS-4655
Voltage 12V DC
Group GC12
Type DC150-12
Quantity 4
Battery capacity, maximum 150AH
Reserve capacity @ 25A rate
295 minutes
Weight, each
94 lbs
42,6 kg
Batteries,
Maintenance-free (option)
All other models, Models with hydraulic drive
Voltage 6V DC
Group GC2
Type 6V-AGM
Quantity 4
Battery capacity, maximum
200AH
Reserve capacity @ 25A rate 380 minutes
Weight, each 62 lbs
28 kg
Batteries, Maintenance-free (option)
All other models, Models with electric drive
Voltage 6V DC
Group GC2
Type
DC224-6
Quantity 4
Battery capacity, maximum 224AH
Reserve capacity @ 25A rate 441 minutes
Weight, each 68.3 lbs
31 kg
Platform Overload Pressure Transducer
(if equipped) All models except GS-3232, GS-4046,
GS-4655
Input voltage
8 t
o 30V DC
Signal voltage
1 to 5V DC
Platform Overload Pressure Transducer
(if equipped) GS-3232, GS-4046
Input voltage
8 t
o 30V DC
Signal voltage
0.25 to 6.25V DC
Angle Sensor (if equipped)
Input voltage
8 to 30V DC
Signal voltage
PWM output
Outrigger Pressure Transducer, GS-3232 only
Input voltage
8 to 30V DC
Signal voltage
1 to 5V DC

August 2021 Service and Repair Manual
Specifications
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 3
Fluid capacities
Hydraulic tank
GS
-1330m, GS-1432m, GS-1932m,
GS
-1932m Lite, GS-1932m XH
1.06 g
allons
4 l
iters
Hydraulic system (including tank)
GS
-1330m, GS-1432m, GS-1932m,
GS
-1932m Lite, GS-1932m XH
1.5 g
allons
5,68 l
iters
Hydraulic tank
Models with hydraulic drive
GS
-1530, GS-1532, GS-1930, GS-
1932, GS
-1932 XH
3.4 g
allons
12,9 l
iters
Hydraulic tank
Models with electric drive
GS
-1530, GS-1532, GS-1930, GS-
1932, GS
-1932 XH
1.0 g
allons
3,8 l
iters
Hydraulic system (including tank)
Models with hydraulic drive
GS
-1530, GS-1532, GS-1930, GS-
1932, GS
-1932 XH
3.8 gallons
14,2 liters
Hydraulic system (including tank)
Models with electric drive
GS
-1530, GS-1532, GS-1930, GS-
1932, GS
-1932 XH
1.46 gallons
5,5 liters
Hydraulic tank
Models with hydraulic drive
GS
-2032, GS-2632
3.4 g
allons
12,9 l
iters
Hydraulic tank
Models with electric drive
GS
-2032, GS-2632, GS-3232, GS-
2046, GS
-2646, GS-2646 XH, GS-3246,
GS
-3246 XH
4.0 g
allons
15,1 l
iters
Hydraulic system (including tank)
Models with hydraulic drive
GS
-2032, GS-2632
4.5 g
allons
17 l
iters
Hydraulic system (including tank)
Models with electric drive
GS
-2032, GS-2632, GS-3232, GS-
2046, GS
-2646, GS-2646 XH, GS-3246,
GS
-3246 XH
6.13 g
allons
23,2 l
iters
Hydraulic tank
GS
-4046
4.9 gallons
18,5 liters
Hydraulic system
(including tank)
GS
-4046
7.84 gallons
29,7 liters
Hydraulic tank
GS
-4655
5.9 gallons
22,4 liters
Hydraulic system (including tank) GS
-
4655
7.94 g
allons
30 l
iters
Tires and wheels
GS
-1330m, GS-1432m, GS-1932m, GS-1932m Lite,
GS-1932m XH
Tire size (solid rubber)
10 x 3 i
n
25,4 x 7,6 cm
Tire contact area
6.5 s
q in
42 cm
2
Castle nut torque, dry
200 ft-
lbs
271,2 Nm
Castle nut torque, lubricated
150 ft-
lbs
203,4 Nm
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH
Tire size (solid rubber)
12 x 4.5
in
30,5 x 11,4
cm
Tire contact area
9 s
q in
58 cm2
Castle nut torque, dry
300 ft-
lbs
406,7 Nm
Castle nut torque, lubricated
225 ft-
lbs
305 Nm
GS
-2032, GS-2632
Models with hydraulic drive
Tire size (solid rubber)
15 x 5 i
n
38,1 x 12,7 cm
Tire
contact area 17.22 s
q in
117 cm
2
Castle nut torque, dry
300 ft-
lbs
406,7 Nm
Castle nut torque, lubricated
225 ft-
lbs
305 Nm
GS
-2032, GS-2632, GS-3232, GS-2046, GS-2646, GS-
2646 XH, GS
-3246, GS-3246 XH, GS-4046, GS-4655
Models with electric drive
Tire size (solid rubber)
15 x 5 i
n
38,1 x 12,7 cm
Tire contact area
17.22 s
q in
117 cm
2
Hex head cap screw, dry
90 ft-
lbs
122 Nm
Hex head cap screw, lubricated
80 ft-
lbs
108,5 Nm

Service and Repair Manual August 2021
Specifications
4 GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Performance Specifications
For operational specifications, refer to the
Operator's Manual.
Drive speed, maximum
GS-2032, GS-2632 - Models with hydraulic drive
Platform stowed
2.0 m
ph
40 ft / 13.6 s
ec
4 k
m/h
12,2 m / 13,6 sec
Platform raised
0.5 m
ph
40 ft / 55 s
ec
0,8 k
m/h
12,2 m / 55 s
ec
GS
-2032, GS-2632 - Models with electric drive
Platform stowed
2.5 m
ph
40 ft / 10.9 s
ec
4 k
m/h
12,2 m / 10,9 s
ec
Platform raised
0.5 m
ph
40 ft / 55 s
ec
0,8 k
m/h
12,2 m / 55 sec
All other models
Models with hydraulic or electric drive
Platform stowed
2.5 m
ph
40 ft / 10.9 s
ec
4 k
m/h
12,2 m / 10,9 s
ec
Platform raised
0.5 m
ph
40 ft / 55 s
ec
0,8 k
m/h
12,2 m / 55 s
ec
Braking distance, maximum
High range on paved surface
<1 f
t
<0,3
m
Gradeability
See Operator's Manual
Function speed, maximum from platform controls
(with 1 person in platform)
Models with hydraulic drive
GS-1530, GS-1532, GS-1930, GS-1932, GS-1932 XH
Platform up
Platform down
15 to 21 s
econds
18 to 22 seconds
GS
-2032, GS-2632
Platform up
Platform down
28 to 35 s
econds
23 to 33 s
econds
Models with electric drive
GS-1330m
Platform up
Platform down
19 to 22 s
econds
20 to 24 s
econds
GS
-1432m
Platform up
Platform down
17 to 21 s
econds
18 to 22 s
econds
GS-1932m, GS-1932m Lite, GS-1932m XH
Platform up
Platform down
24 to 28 s
econds
18 to 22 s
econds
GS
-1530, GS-1532
Platform up
Platform down
19 to 21 s
econds
18 to 22 seconds
GS-1930, GS-1932, GS-1932 XH
Platform up
Platform down
21 to 26 s
econds
18 to 22 s
econds
GS
-2032
Platform up
Platform down
34 to 41 s
econds
23 to 33 s
econds
GS-2632
Platform up
Platform down
37 to 43 s
econds
23 to 33 seconds
GS-3232
Platform up
Platform down
50 to 58 s
econds
28 to 32 s
econds

August 2021 Service and Repair Manual
Specifications
Part No. 1309020GT GS™-30m • 32m • 30 • 32 • 46 • 55 5
Function speed, maximum from platform controls
(with 1 person in platform)
Models with electric drive
GS-2046
Platform up
Platform down
34 to 41 s
econds
26 to 34 seconds
GS
-2646, GS-2646 XH
Platform up
Platform down
37 to 43 s
econds
26 to 34 s
econds
GS-3246, GS-3246 XH
Platform up
Platform down
53 to 61 seconds
26 to 34 seconds
GS
-4046
Platform up
Platform down
62 to 72 s
econds
39 to 48 s
econds
GS-4655
Platform up
Platform down
91 to 95 s
econds
56 to 60 s
econds
GS
-3232 Outrigger leveling capacity, maximum
Side to side
Front to rear
5°
3°
Hydraulic Oil Specifications
Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to
hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
conditioning, and foam and aeration suppressio
n
properties.
Cleanliness level,
minimum
ISO 15/13
Water content,
maximum
250 p
pm
Recommended Hydraulic Fluid
Hydraulic oil type
Chevron Rando HD Premium
Viscosity grade
32
Viscosity index
200
Optional Hydraulic Fluids
Mineral based
Shell
Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32
Shell Donax TG (Dexron III)
Chevron 5606A
Biodegradable
Petro Canada Environ MV
46
Fire resistant
UCON Hydrolube HP-
5046
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie
Product Support before use.
Optional fluids may not have
the same hydraulic lifespan and
may result in component
damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond its
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.

Service and Repair Manual August 2021
Specifications
6 GS™-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
Do not top off with incompatible
hydraulic fluids. Hydraulic fluids
may be incompatible due to the
differences in base additive
chemistry. When incompatible
fluids are mixed, insoluble
materials may form and deposit
in the hydraulic system,
plugging hydraulic lines, filters,
control valves and may result in
component damage.
Note: Do not operate the machine when the
ambient air temperature is consistently above
120°F / 49°C.
Hydraulic Fluid Temperature
Range
Ambient air temperature
1 Chevron hydraulic oil 5606A
2 Petro-Canada Environ MV 46
3 UCON Hydrolube HP-5046D
4 Chevron Rando HD premium oil MV
Chevron Rando HD Premium Oil
MV Fluid Properties
ISO Grade
32
Viscosity index
200
Kinematic Viscosity
cSt @ 200°F / 100°C
cSt @ 104°F / 40°C
7.5
33.5
Brookfield Viscosity
cP @
-4°F / -20°C
cP @
-22°F / -30°C
1040
3310
Flash
point
375°F / 190°C
Pour point
-58°F / -
50°C
Maximum continuous operating
temperature
171°F / 77°C
Note: A hydraulic oil heating system is
recommended when the ambient temperature is
consistently below 0°F / -18°C.
Note: Do not operate the machine when the
ambient temperature is below -20°F / -29°C with
Rando HD Premium MV.