7
OPERATIONS
Turn on:
Plug in and switch on the heater, the heater will enter into standby mode, and show “OF” on display. Press
button to turn on the heater, and show factory default setting temperature 22°C on display.
Temperature setting:
• Temperature setting range is 5–35°C.
• Default temperature setting is 22°C.
• Press or button to set temperature, the temperature will increase or decrease by 1°C after
each pressing. It will show setting temperature on display after setting.
Timer:
• Press button, “00” flash on display, then press or button to set timer. Each pressing is 1
hour. Press button to save setting, or wait 15 seconds to save automatically. Timer indicator light
will keep on red after setting.
• Timer set range is 0 to 24 hours.
• Press button again to modify or cancel timer setting.
• After timer close, the heater will enter into standby mode, and press button to turn on the heater.
Open window function
• The heater has an open window function.
• Default setting of open window function is closed.
• Press and hold button for 5 seconds, display show “F0”, then press button to open open
window function, display show “ON”, and press button to close open window function, display show
“OF”, then press button to save setting, or wait 15 seconds to save automatically.
• Open window function description:
1. If you open a window widely in the space where the heater is located and the temperature drop 2°C
or more than 2°C in two minutes, a sensor will detect the sharp drop in temperature. The heater will
switch out automatically and show “F0” in display.
2. The heater will be reignited automatically after 10 minutes. However you can manually relight the
heater before the 10 minutes end by pressing . The icon “F0” disappears and show previous
operation mode.
Resetting the heater
• Turn off the heater’s main switch.
• Press and hold while you turn on the heater’s main switch.
MAINTENANCE
For cleaning, always unplug the heater and leave it to cool.
Wipe the heater regularly with a damp cloth and dry the surface before turning on the heater again.
The heater must be cleaned at least once a month during the heating season.
CAUTION!
The heater should never be immersed in water. Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous. Dust etc. should be removed with a soft
cloth.
The heater can be stored in a dry and clean place.
