TESY 1506 Specification sheet

1
OIL FILLED RADIATOR
User manual
Read carefully this manual before using the oil-filled radiator.
Keep this manual for further reference. If the appliance is to be acquired by a new owner this manual should also be submitted!
We thank you for choosing oil-filled radiator produced by TESY ltd. This is a product that provides heating in cold winter weather according to
customers’ needs for the achievement of comfortable temperature conditions in the premises. If correctly maintained according to the terms of this
manual the appliance will provide long-life service.
1. General operation and safety instructions
Take the radiator out of the packing box and remove all packing material stuck between fins. Check if radiator is not damaged during transportation
and if its power cord is intact.
Before connecting oil-filled radiator to the main electricity system check if rated voltage shown on the technical information plate corresponds to
the voltage of the electricity system at your home (office). The appliance is intended to be used with the voltage that is shown on its technical
information plate. It is obligatory to connect the radiator only to grounded socket-outlets.

2
Appliance has to be operated only for the purpose it was intended for, i.e. to provide heating in domestic premises. Every other kind of operation
shall be considered incorrect and dangerous. Manufacturer does not take responsibility for damages, caused by improper and unreasonable
operation. Non-adherence to these safety measures will render guarantee terms invalid!
Do not use the appliance in areas of operation and storage of inflammable substances. Do not use the appliance in highly combustible areas (for
example in close proximity to inflammable gases and aerosols) –there is a great risk of explosion and fire!
During operation of thermal fan models do not insert or allow to be inserted any objects in the ventilation openings (inlet and outlet). That may lead
to damage of the appliance or other hazards.
Warning: Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that is has been
placed or installed in its intended normal operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazard involved . Children aged from 3 years and
less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made by children without supervision.
CAUTION –Some parts of this product can become very hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
- The appliance is not suitable for animal breeding. It is intended for domestic use only!
- There is a great risk of burning one’s skin in case of touching the surface of the appliance! Do not touch it if the appliance is operating or has been
recently turned off –there is a risk of burning!
- Moving –radiator is to be moved after disconnection of the power cord from the socket outlet and its full cooling down to room temperature!
Non-observance of that rule will lead to a great risk of burning and falling of the radiator.
- Never touch the appliance with wet or moist hands –there is danger for your life!
- Never pull power cord or the appliance in order to disconnect it from the mains.
- If the power cord is damaged it has to be replaced only by an authorized qualified personnel –in order to avoid the risk of personal injury of the
user. The whole activity related to damaged cord replacement must be conducted by a qualified electrician!
- It is not recommended to use extension, connection-block or other means to supply the oil-filled radiator.
- With the thermo-fan models do not cover the appliance and do not restrict free air flow to and from inlet and outlet protection grating. Non-
observance of that rule may lead to overheating and fire.
- Do not cover the appliance during operation! That may cause dangerous rise of temperature inside the radiator.
- If the appliance is not in order or is not functioning well, turn it off and do not try to repair it yourself. For any kind of repairs search help from
authorized service center in you location. There is the place you will have your damaged detail repaired with an original one. Non-observance of this
condition will compromise appliance safety operation.
- If you decide to stop using an appliance of that kind it is recommended to make it unusable by cutting power cord after you have disconnected it
from the mains. It is highly recommended all hazards related to the appliance to be secured, especially I there is chance children could use disjointed
appliance for play.
- Never keep the appliance unnecessarily turned-on. Disconnect it from the mains if it is not to be used for a long period of time.
- In order to avoid dangerous overheating of the power cord it is recommended to unreel it completely from its reel (with the models provided with
a reel or power cord compartment).
Warning: With thermo-fan models of oil-filled radiators - In order to avoid the risk related to not intentional restart of the thermal protection do
not operate oil-filled radiator in combination with a programmer, counter or any other device which automatically turns it on/off because if the
appliance is covered or incorrectly positioned there is a risk of fire.
- Do not use radiator near bath, shower, sink or swimming-pool.

3
- Do not use radiator for laundry drying
- Do not place power cord on the hot surface of the oil-filled radiator!
- Radiator should always operate in upright position!
- An appliance with a damaged or not-connected thermoregulator must not be operated.
- In order to remove the peculiar “new product” smell of your radiator adjust it to maximum power for at least two hours during its first operation.
- It is normal for the radiator to crackle during its initial operation.
- You should not position radiator in immediate proximity to a socket outlet, especially below it!
- Oil-filled radiator is filled with the exact quantity of thin special oil. Repairs that require opening of oil container should be conducted only by
manufacturer or its service agent, which you should contact in case of oil leakage. In event of oil leakage you should immediately connect the
authorized service at your location.
- At decommission of oil-filled radiator observe regulations for oil disposal!
- Appliance should not be used in rooms smaller than 4 square meters.
2. Castor wheels assembly.
Take castor wheels out of their packing. Turn radiator upside down on a carpet or another soft surface in order to protect its body from scratching.
Fit the wheels on the metal rivets on the legs, pressing them until they click in such way, that they can freely roll.
Fit the first leg with the wheels to the lower front part of the device, putting both ribs of the leg, so that they include the first gill of the radiator (see
the figure 1). Block the leg by both screws, screwing them to the utmost.
Fit the second wheeled leg to the lower rear side of the device, putting both ribs of the leg, so that they include the last but one gill of the radiator.
Block the leg by both screws, screwing them to the utmost.
After executing this operation, turn the device, putting it in vertical operative position for functioning.
4 –wheels radiator

4
3. Operation
Turning-on
Put the plug into the socket, turn thermostat knob clockwise and turn the appliance on as follows:
Only button (I) is turned-on –light heating –MIN (W);
Only button (II) is turned-on –medium heating –MED (W);
Both buttons are turned-on –intense heating –MAX (W);
Power values of the corresponding levels ( MIN (W), MED(W), MAX(W)) are shown in table 1
Table 1
Model
MAX(W)
MED(W)
MIN(W)
1506
1500 W
900 W
600 W
2007
2000 W
1200 W
800 W
2509
2500 W
1500 W
1000 W
.
To turn off the appliance turn off the two buttons and take the plug out of the socket outlet.
Thermoregulator adjustment
Power switch and thermoregulator should be set to maximum position until the desired room temperature is reached. Then turn thermoregulator
switch in the opposite direction till red light indicator goes down. Thermoregulator may stay in that position after that. Immediately after room
temperature falls below thermoregulator value thermal switches are turned on automatically until set temperature is reached. In that way room
temperature is steady with minimum energy consumption.
If you want to prevent temperature fall in the room below 0 degrees Centigrade adjust thermostat switch in its initial position and turn on the two
power buttons.
24-hours timer models (“T”)
Adjust the heating period in the following consequence:
- Set the clock to the correct time. If it is 10 o’clock turn the figures dial so that the mark is positioned to the figure of 10.
Warning: Turn the figures dial only in the direction indicated with arrows! Adjust the period of operation of the appliance by pushing black keys
to the center –every one of them corresponds to 15 minutes period. Sector of the pushed keys will correspond to the period of operation of the
radiator in automatic mode every day.
Important: Plug should always be connected to the socket outlet!
- In order to change programmable period of automatic operation turn black keys backwards and adjust new periods of operation.
- If you do not want the appliance to operate in programmable mode push all black keys to the center of the figures dial. To turn off the radiator in
that case you have to pull the plug out of the socket. In that way unnecessary operation of the timer is avoided.
Thermal fan models (“V”)
Models equipped with a 500W thermal fan offer faster achievement of desired temperature and better ventilation in the room. Thermal fan may
function separately or together with oil-filled radiator. Thermal fan is positioned in the bottom part of the front panel of the radiator and is turned
on by a switch positioned in that part of the panel. Cold air is sucked through the grating in the front part of the front panel and hot air is released in
the room through the grating positioned in the bottom side part of the radiator panel. Desired room temperature with thermal fan operation is
adjusted by thermostat of the radiator in the above mentioned manner. For the normal operation of the thermal fan it is necessary that air passes
unobstructedly through inlet and outlet grating. Electrical device is intended for domestic use in premises with low level of dust pollution. Dust is
accumulated after certain period of operation. In is necessary to check periodically level of pollution and if needed to consult the service
organization for cleaning.
Warning : In case of obstruction of grating of incoming and outgoing air thermal protection is enabled. It turns off heater of the thermal fan. In
that case disconnect radiator from the socket outlet, eliminate the cause of the obstruction, wait about 5 minutes and turn on the radiator again.
If the thermal fan does not operate connect authorized service at your location.
Minimum distance between hot air outlet of the thermal fan and furniture (or other objects) should be 60 cm.
We recommend when desired room temperature is achieved to turn off thermal fan and to operate the appliance only in “radiator mode”.

5
4. Maintenance
In order to provide long period of operation your oil-filled radiator does not need any kind of special maintenance. Clean radiator with a damp soft
cloth. Do not use solvents or abrasive detergents. If necessary use a vacuum cleaner to clean the dust from the radiator!
Instructions for environmental protection. Obsolete
electric devices contain valuable materials and
therefore they should not be treated as domestic
waste! We ask you for cooperation with your active
behavior for the protection of resources and nature.
We ask you to return your appliance at the
organized buy
-back stations (if there are any).
TESY LTD, Bulgaria, 9701 Shumen, Madara Str. 48, Tel.: [phone]
www.tesy.com
Warning: in order to avoid overheating do not cover the appli
ance!