Usage and Storage Instructions 5
EN
English
-Eco (energy-saving) mode – the
maximum working temperature is 18°C by
default. When the environment temperature
is below 18°C, select ECO energy-saving mode
and the heater will be full power (high-
grade) heating. When the temperature reaches
18°C, the heater automatically switches to low-
grade heating in low-grade working condition.
When the temperature is reduced to 16°C, the
heater will automatically recover heating.
-Economy heating mode – the heater will
automatically switches to the state of economic
heating (that is, the temperature is 3°C lower
than the comfort temperature).
-Comfortable heating mode –
the heater
will be in the full power (high grade) heating state.
Temperature setting
Touch temperature key , and temperature display
ickers. Touch or to set proper temperature,
and the machine will automatically default the
temperature after 10 seconds. The temperature range of
the heater is between 15 to 50°C.
Only you can set the temperature in the
comfort mode ; the other modes are set by
default.
When the environment temperature is higher than the
set temperature of 1 degree, the heater stops heating.
When the product stops heating (The heating icon is
extinguished at the same time, and corresponding pattern
icon is still displayed), when the environment temperature
is below 1 degrees , the heater will automatically recover
heating. (heating icon is displayed meanwhile).
Timing setting
Touch , and hour time 00: ickers. Touch or
to set hour time, and then touch again: 00: minute
time ickers. Touch or to set minute time.
In the anti frost mode state, we can set an appointment
to open the machine.(that is, after completing the
appointment, the heater enters the high-grade
heating mode .) In the heating state, an appointment
can be set up for shutdown.( that is, after completing
the appointment, the heater stops heating and
automatically enters anti frost mode. )The timing time
decreases with time and the display time also decreases
meanwhile. (when the timing state is not set, the time is
shown as 00:00).
3. Week mode setting
Start week mode
Touch on-o button : the screen is displaying
environment temperature , display time (00:00), anti
frost function icon , and day mode icon at that
time. Touch
or
to switch to week mode
, and week mode icon ickers. Touch : enter
week mode standby state, and the screen is displaying
environment temperature at that time, and display date
; mode number P1; time (00:00), anti frost function
icon , and week mode icon .
Time setting
- press , date ickering, press
or
to
set date within one week (1 to 7 any day);
- then press , time 00 : ickering and press
or
to set time from 1 to24 hours.
- press timing key ,00 minute: ickering and
press up key or down key to set time
from 0 to 59 minutes.
Week mode setting:
- enter week mode setting state, week mode
icon ickering. Press to conrm, and
week mode
icon stops ickering.
- date ickering, press
or
to select date
(1 to 7 any day); then press to conrm,
pattern number ickering .
- Press
or
to select any suitable working
mode and then press to conrm so that
the selected pattern number will be light for a
long time . Then press , date ickering,
and set the next day’s mode. According to the
above settings, the operation process can be set
in turn (Monday to Sunday any day, and P1 to
P5 any one suitable working mode).
Temperature setting:
- touch , and temperature display ickers.
Touch
or
to set proper temperature
within the temperature setting range of 15 to
50 degrees.
- When the environment temperature is higher
than the set temperature of 1 degrees, the
heater stops heating. When the environment
temperature is below 1 degrees, the heater will
automatically recover heating.
The set temperature is the temperature in the comfort
mode, while temperature of other modes cannot be set
freely. Default temperature of economic model is 3
degrees lower than comfortable mode . ECO energy-
saving mode automatically defaults to 18 degrees, and
anti frost default mode automatically defaults to 5
degrees.
The machine can automatically remember set
programs. As long as the power supply is
constantly opened, the set program and time keep
working at all time. If the power goes o, you need to
revise the time next time you open it, but the other
settings will not change.
