Texecom Premier Elite XT-W User manual

4m
13'1"
15m
50'
2m
6'7"2m
6'7"
INS 466-3
STANDARDS
Alarm
Systems:
EN50131-2-2, EN50131-5-3, EN50131-1,
PD6662, Grade 2 Class II
EMC: EN50130-4:1995: A1: A2
ETSI EN301 489-03 V1.4.1
R&TTE: ETSI EN300-220 (V2.1.1)
Environmental: EN50130-5
Frequency Band: 868.0 - 868.6 MHz / 433.05 - 434.79 MHz
• Please refer to product label
Receiver: Category 1, Class 2
Receiver LBT
(Listen Before Talk) Yes
Transmitter Duty
Cycle 868Mhz<1%, 433Mhz<10%
Low Voltage
Signal 2.85V
Operating Voltage 3V
Maximum current 32mA
Quiescent current 60uA
Premier Elite and the wireless logo are trade marks of Texecom Ltd. © 2010
The Premier Elite XT-W/QD-W is protected by European Registered Design. No: 3004997
D20110109 INS466-3
WARRANTY
2 year replacement warranty (excludes battery).
The Premier Elite XT-W/QD-W is designed to detect the movement
of an intruder and activate an alarm control panel. As the Premier Elite
XT-W/QD-W is not a complete alarm system, but only a part thereof,
Texecom cannot accept responsibility or liability for any damages whatso-
ever based on a claim that the Premier Elite XT-W/QD-W failed to function
correctly.
Due to our policy of continuous improvement Texecom reserves
the right to change specification without prior notice. All specifications
are measured at 20ºC (68ºF).
Certificate Number: FM 35285
Made In
England
ALTERING COVERAGE AT 2m MOUNTING HEIGHT
8m
26
' 2 "
10m
32
' 9 "
15m
50
'
15m
50 '
2m
6'7"
2m
6'7"
2m
6'7"
2m
6'7"
Metal Lintel
CHOOSING A LOCATION
Do not install close to large metal
objects or mains wiring
230V
110V
>1m
>1m
Metal Filing
Cabinet
>1m
Avoid common false alarm sources MOUNTING
For indoor use only
✓
✗
✓✗ ✓
Mount on a stable surface
Premier Elite QD-W Top View
COVERAGE & PICK-UPBATTERY SAFETY
• Do not throw into a fire • Do not heat
• Do not short circuit • Do not charge
• Replace only with same or equivalent type(3V) • Do not disassemble
• Always observe local regulations when disposing of a battery
• Detector will transmit low battery warning when battery needs replacing
COVERAGE PATTERNS
ANGLING THE
DETECTOR
INTRODUCTION
• For wireless connectivity, detailed programming
and system set-up instructions please refer to
the compatible RICOCHET™ technology enabled
Premier wireless expander instructions.
• Featuring RICOCHET™ wireless technology the
Premier Elite XT-W and Premier Elite QD-W are
designed for professional security installations.
Metres
Metres
Metres
12m 12m
15m
85°
Side View
Premier Elite XT-W Top View
Metres
Metres
Metres
9m 9m
12m
85°
Side View
Instruction Manual
Premier Elite XT-W/QD-W

HOW TO REMOVE THE CHASSIS
Remove chassis before mounting
the detector
6
7
5
WALL MOUNT BRACKET*
CEILING MOUNT BRACKET*
31 2
1 2 3 4
4
Note:
For EN 50131 compliance both the detector and
the rear tamper insert must be fixed to the wall,
mounting brackets should not be used.
*Available Separately
DETECTOR KNOCKOUTS
Rear Tamper Insert
60mm
(2.4”)
40mm
(1.6”)
112.25mm
(4.4”)
-35°C (-31°F) to
+60°C (+140°F)
160g (5.5oz)
approx.
-10°C (14°F) to
+55°C (+131°F)
JP1
JP1
JP1
1
2
Battery Tag
Remove on installation.
Learn Switch
Hold down during battery
connection to learn device.
0.3 - 3.0m/s
1 - 10ft/s
XT PULSE COUNT
3
QD PULSE COUNT
JP1
JP1
JP1
Mounting Height Settings
1
2
3
0.3 - 3.0m/s
1 - 10ft/s
LED
Indication only available in
walktest mode.
(See Premier wireless
expander instructions)