The Handy THFLS User manual

OPERATOR’S MANUAL & PARTSLIST
MODEL –THFLS
FOOT OPERATED MANUAL LOG SPLITTER
Please read & understand this manual, paying particular attention to the safety
instructions, before use. Failure to follow instructions can result in personal
injury to you or bystanders.
The manufacturer reserves the right to change the product specification and livery according to continued product improvements.
193851001 07/07/2015

CONTENTS
SPECIFICATIONS
SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
ASSEMBLY
MAINTENANCE & STORAGE
OPERATION
PARTS DIAGRAM & LIST
GUARANTEE

SPECIFICATIONS
Model
THFLS
Product Number
193851001
Splitting Force
1.5 Tonnes
Minimum/Maximum Log Length
100mm/420mm
Maximum Log Diameter
150mm
Weight
12.5kgs
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.

SAFETY INSTRUCTIONS
Read and understand the owner’s manual and labels affixed to the machine. Learn its application
and limitations as well as the specific potential hazards. Retain these instructions for future
reference. The operator is responsible for following the warnings & instructions in this manual and
on the product.
During Operation
• Do not use the Splitter in damp or wet locations & conditions.
• Do not allow children to play on, stand upon or climb the Splitter. Children & other Bystanders
should be kept a minimum of 10 metres away from the working area.
• Do not at any time allow anyone to sit or stand on the Splitter.
• Always inspect the Splitter before use to ensure it is in good working condition.
• Immediately replace or repair damaged or worn parts before using the Splitter. Only use
approved parts.
• Do not exceed the maximum capacities listed within the Specification of this manual.
• Always check and tighten hardware and assembled parts before operation.
• Do not over-reach and keep proper footing and balance at all times.
• Split wood only, the Splitter has not been designed for use with any other material.
• Do not modify or use the splitter for a purpose for which it was not intended. Your warranty could
be invalidated.
Crush and Cut Hazards
• Always keep your hands and feet clear from moving parts while operating theequipment.
• Always keep the work area clean and clear when operating.
• Always wear safety gear, eye protection, steel-toed boots & gloves when operating the
Splitter.
Safety alert symbol. Used to alert you to potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in serious injury
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
CAUTION
Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.

ASSEMBLY
The Foot Operated Log Splitter is fully assembled at the factory.
Remove the Splitter and contents from the carton.
If you are unable to lift the Splitter from the carton, safely cut the end section to allow you to slide the
Splitter away from the carton. Be sure the carton is empty before discarding.
If you require any assistance with regards to the contents of the Splitter, please contact us:
Tel: [phone] (Mon to Friday 8.30am to 5.00pm)
Email: [e-mail]
OPERATION
Place the Splitter onto a flat, level surface within your working area. Be sure that the Splitter is
stable, before operating.
Pull out the Front Support Leg, to it’s full extension. Tighten the Locking Handwheel securely.
Select your log; lift the Slide Stop to the required length along the Support Beam. Lay the log on
the Support Beam and push the Slide Stop against the log.
Ensure you are balanced and have secure footing.
Pump the foot pedal down with your foot, the complete travel.
It may take three or four pumps to split your log.
Be careful of split wood falling to the floor.
Move the split log to a safe area away from where you are operating.
Tips
Wet or non-seasoned wood is more difficult to split than dry wood because the fibres stick
together.
Reversing the log & splitting it from the other end may help, if you cannot pull the wood apart.
Large or multiple knots in a log make splitting more difficult. Usually if the log is rotated so the
knots are vertical to the blade, the wood will split more easily and less stress is placed on the
splitter. This will reduce wear & tear, plus the possibility of damaging components of the Splitter.

MAINTENANCE & STORAGE
WARNING
Improper maintenance & storage of the Splitter may void your warranty. Keep the Splitter clean
for better and safer performance.
MAINTENANCE
Occasionally sharpen the splitting wedge. Use a file or sharpening stone (Not included).
Alternatively, contact your local approved service dealer for assistance. A sharp splitting wedge
will split wood safely and effectively.
Before each use, check all nuts & bolts to be sure they are sufficiently tightened.
To assist the movement of the Slide Stop, lightly apply Multi-purpose Grease to the Support
Beam.
STORAGE
For years of trouble free service, make sure the Splitter is clean and dry beforestoring.
Before storing, clean the Splitter thoroughly with a soft bristled brush.
Store indoors or in a protected area during severe weather and winter months.
To store the Splitter, stand in an upright position, with the Support Leg secured against the
underside of the Support Beam and secured with the Locking Handwheel.

PARTS DIAGRAM & LIST
Item No.
Part No.
Description
Quantity
1
TH214-1
Slide Stop
1
2
TH214-2
Log Guide
2
3
TH214-3
Spacer
4
4
TH214-4
Lock Nut M8
2
5
TH214-5
Nut M8
6
6
TH214-6
Spring Washer Ø8
6
7
TH214-7
Hex Bolt M8*110-1M8*70-1
2
8
TH214-8
Support Beam
1
9
TH214-9
Wheel Ø125*30
2
10
TH214-10
Circlip Ø16
4
11
TH214-11
Screw Ring M8*40
1
12
TH214-12
Hex Bolt M8*50
1
13
TH214-13
Clamp
1
14
TH214-14
Retaining Ring
2
15
TH214-15
Spring
2
16
TH214-16
Hex Bolt M10*75-8.8
3
17
TH214-17
Foot Pedal
1
18
TH214-18
Lock Nut M10
3
19
TH214-19
Support Leg
1
20
TH214-20
Locking Handwheel
1

GJ HANDY & CO LTD USER WARRANTY POLICY
1. Users Statement of Warranty
Each new machine is warranted against defective material or assembly of material under normal
usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved
in replacing and repairing those parts, which are of original manufacture.
2. Period of Warranty
All Webb, Handy Pro (Brushcutter & Long Handle Hedgecutter only) and Sanli domestic products
2 years from the original date of sale to the first domestic user.
90 days from the original date of sale to the professional/commercial user.
90 days from the original date of sale when used for hire.
Engines as per the manufacturer’s warranty statement which will be supplied with the machine.
1 year from the original date of purchase for Replacement Spare Parts (unless normal wear & tear
component, which are covered for 90 days).
All machines’ must be serviced within the first 12 months from the original date of purchase to
comply with the warranty, failure to do so will invalidate the 2nd year of the warranty.
A reduced warranty period of ninety days applies to those items which are subject to normal wear
and tear (e.g. wheels, tyres, cutter bars, cylinders, bottom blades, belts, cables, grass bags, spark
plugs).
All Handy, Handy Pro (All others), Mowerland and Q-Garden domestic products
1 year from the original date of sale to the first domestic user.
90 days from the original date of sale to the professional/commercial user.
90 days from the original date of sale when used for hire.
Engines as per the manufacturer’s warranty statement which will be supplied with the machine.
1 year from the original date of purchase for Replacement Spare Parts (unless normal wear & tear
component, which are covered for 90 days).
A reduced warranty period of ninety days applies to those items which are subject to normal wear
and tear (e.g. wheels, tyres, cutter bars, cylinders, bottom blades, belts, cables, collection bags,
spark plugs).
All warranty repairs must be undertaken by an authorised service dealer.
These dealers have been accredited by GJ Handy & Co Ltd and agree to only use genuine parts and
follow our repair procedures.
Version 2 06-15

GJ HANDY & CO LTD USER WARRANTY POLICY
3. Not covered by this warranty
The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or
corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or
accident.
The warranty policy does not cover any costs necessary for the standard periodic maintenance
services instructed by the operators manual, or service parts replacement which would include oil,
filters, tyres, belts, brake linings, fuses, blades, seals and other service parts unless it can be proven
that the item has evidence of faulty manufacture.
The warranty policy will not cover failure or damage caused as a result of parts or accessories being
modified without the written approval of GJ Handy & Co Ltd.
The warranty policy will not cover the unit if non-genuine parts have been fitted and as a result
damage has occurred to the unit.
The warranty policy is non transferable and is only applicable to the original purchaser.
4. Disclaimer
This warranty is only a remedy for defect of products. GJ Handy & Co Ltd will never warranty in
terms of the merchantability or the fitness for a particular purpose.
No person is authorised to make any warranties, representations or promises, expressed or implied,
on behalf of GJ Handy & Co Ltd, or to modify the terms conditions or limitation of this warranty
policy in any way.
Neither GJ Handy & Co Ltd nor any company affiliated with GJ Handy & Co Ltd shall be liable in any
event or manner whatsoever for incidental or consequential damages or injuries, including, but not
limited to, loss of crops, loss of profit, out of pocket expenses or profits, rental of substitute
equipment or other commercial losses.
5. General
Most warrantable failures show up within the first few weeks of use. These failures are usually
straightforward and warranty assessment is relatively easy.
Failures relating to cutter decks and belts need careful investigation, as the cause may not always be
straightforward. Look for damage to blades and pulleys especially when the cutter belt or blade boss
have snapped or cracked as this could be due to impact damage.
Customers should always refer to the operator/instruction manual when any disputed problem
arises, you will find most areas covered within the manual.
Version 2 06-15

For Spares or Support of your Handy product, please contact us:
Tel: [phone]
(Mon –Fri 8.30am to 5.00pm)
Email: [email protected]
Tosee our complete range of garden machinery and equipment visit:
www.thehandy.co.uk
Distributed by Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY