THE WORLD MODELS EP-Sailor User manual

Requires 3 channel radio with 2 mini servos, 30A speed
controller with brake and 7 cell 1800 mAh hump pack battery.
Wing Span 78 in/1980 mm
Wing Area
Flying Weight
Fuselage Length
3.0 lbs/1380 g
665 sq in/42.9 sq dm
40.5 in/1035 mm
Specifications
E P - S a i l o r
E P - S a i l o r
Speed 450 motor
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
*Specifications are subject to change without notice.*
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF) SERIES
MADE IN CHINA
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
INSTRUCTION MANUAL
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

I N D E X
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
BEFORE YOU BEGIN
P.1
P.2
P.3-9
P.9
Apply epoxy glue.
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Drill holes with the specified
diameter(here:3mm)
Pay close attention here!
Pierce the shaded portion
covering film.
Apply instant glue
(C.A. glue, super glue.)
Ensure smooth non-binding
movement while assembling.
Cut off shaded portion.
Must be purchased separately!
Do not overlook this symbol!
3 mm
P.1
EP-Sailor
EP-Sailor
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts. but will extend to the parts that are good before
not
gluing to defective parts during assembly.
Read through the manual before you begin, so you will have an overall idea of what to do.
Symbols used throughout this instruction manual comprise of the following : -
1
2
3
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

Parts list
13.PLASTIC PARTS:--
CLEVIS -- 2 pcs
STRAPER -- 2 pcs
HORN -- 2 sets
PLASTIC PLATE 0.8 x 25 x55mm(Wing Protection) -- 1pc.
BATTERY TIE -- 1 pc.
DOUBLE-SIDE TAPE -- 1pc.
14.METAL PARTS :--
WING TUBE D9.5 x 373mm -- 1 pc.
LOCK PIN 1.2 X 41mm -- 1 pc.
SCREW PM2 X 12mm -- 4 pcs
SCREW PM2.5 X 12mm -- 2 pcs
SCREW PM2 X 16mm -- 2 pcS
SCREW PM2.5 X 16mm -- 2 pcs
SOCKET HEAD SCREW
M3 X 8mm -- 2 pcs
SCREW PWA2.3 X 8mm -- 4 pcs
WASHER d3 X D7mm -- 2 pcs
WASHER d2.5 x D8mm -- 2 pcs
15.FUEL TUBE 6 X 5mm -- 8 pcs
16.DECALS:ST200 082 -- 1 set
P.2
1.FUSELAGE -- 1 pc.
2.MAIN WING -- 1 set
3.STABILIZER & ELEVATOR -- 1 set
4.VERTICAL FIN & RUDDER -- 1 set
5.CANOPY -- 1 set.
6.COWLING -- 1 pc.
7.SPEED 550 MOTOR -- 1set
8.GEARBOX -- 1 set
11.SPONGE(For Radio Equipment) -- 1 pc.
9.PROPELLER -- 1 set.
10.SPINNER -- 1 pc.
12.PUSHROD :--
METAL ROD 1.6 X 600 mm w/Threads(For Rudder Servo) -- 1 pc.
METAL ROD 1.6 X 670mm w/Threads(For Elevator Servo) -- 1 pc.
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

Completed
Wing Tube Ø9.5 x 373mm
Main Wing
P.3
1
Stabilizer
2
Apply instant type CA glue to both sides of each hinge.
Completed
A=A
A
A
Bottom View
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.4
Vertical Fin / Stabilizer
3
Completed
Peel off shaded Portion
covering film.
Apply instant type CA glue to both sides of each hinge.
B=B
BB
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.5
7
PM2 x 12mm Screw
2
Ø1mm pilot holes for World Models tri-horn are pre-drilled. Please
look for pin-hole marks at side of control surfaces.
7
Rudder Pushrod
5
Elevator Pushrod
4
PM2 x 12mm Screw
2
5mm5mm
77mm
77mm
Ø1mm pilot holes for World Models t ri-horn are
pre-d rill ed. P lease loo k for pin-hole m arks at
under side of cont rol s urfa ces.
Metal Rod 1.6 x 670mm
PM2 x 12mm
2mm
PM2 x 12mm
Clevis
Fuel Tube
Ø6 x 5mm
Horn
2mm
Metal Rod
1.6 x 600mm
Metal Rod
1.6 x 600mm
PM2 x 12mm
Metal Rod
1.6 x 670mm
Fuel Tube
Ø6 x 5mm
Clevis
Horn
2mm
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

6
1
2
d3 x D7mm M3 x 8mm
3
PM2.5 x 12mm
45
PM2 x 16mm
6
Motor / Cowling Setting
P.6
1.2x41mm
7
8
PA2.6 x 12mm
PWA2.3 X 8mm
Spinner
3mm Set Screw
PM2.5 x 12mm Screw
PWA2.3 X 8mm Screw
4
2
2
M3 x 8mm Screw
1
d3 x D7mm Washer
2
3mm Set Screw
PM2 x 16mm Screw
2
2
PA2.6 X 12mm Screw
1.5mm
TO ALLOW FOR
BACKLASH OF
MATCHING GEAR,
PUT A PIECE OF
THIN PAPER
BETWEEN THE
GEARS AND
THEN TIGHTEN
THE M3X8mm
SCREWS. REMOVE
THE PAPER
BEFORE FLYING.
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.7
C a nopy
9
Completed
Main Wing
8
d2.5 x D8mm Washer
PM2.5 x 16mm Screw
2
2
d2.5 x D8mm
PM2.5 x 16mm
Wing Protection
0.8 x 25 x 55mm
2.5mm
d2.5 x D8mm PM2.5 x 16mm
Radio Equipment
Rudder Servo
Rudder Pushrod
Straper
Elevator Pushrod Elevator Servo Battery Tie
Fuel Tube
Ø6 x 5mm
Install and arrange the servo as shown in the diagram.
Sponge
7
30A Speed Controller
Speed 550 Motor
Double-Side Tape
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

AA'
P.8
Wing Setting
10
Adjust the wing and fuselage configuration as in the diagrams.
A=A' B=B' C=C'
BB' C'
C
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

75mm
C.G.
2.95in.
Adjust the control throws as shown in the
diagram.These throws are good for general
flying. You can adjust according to your
personal preference.
Elevator
Important Safety Precautions
#First time flyer should never fly by himself/herself. Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# is specially designed to be powered by speed 550 geared motor.
#Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws, use thread locker if applicable.
Warning!
P.9
Control Throws
C.G.
12
The ideal C.G. position is 75mm (2.95 in.) behind
the leading edge measured at where the wing
meets the fuselage. In order to obtain the C.G.
specified, add weight to the fuselage or move
the battery position. Check the C.G. before
flying.
Rudder
30mm
30mm
15mm
15mm
11
E P - S a i l o r
E P - S a i l o r
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

The World Models
Manufacturing Co., LTD.
www.theworldm odels.com
E1590311
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com