Threshold TGTTMC User manual

>> Assembly instructions
TM
© 2020 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Glass Door Library Cabinet
Style #: TGTTMC
DPC-item #: 249-17-2821

Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
Good luck – though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a work surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
tool needed (only hex wrench included)
2
For tipping restraint hardware kit only.
Phillips head
screwdriver
Hex wrench

Children have died from furniture tipover.
To reduce the risk of furniture tipover:
⚫ ALWAYS install tipover restraint provided.
⚫ NEVER put a TV on this product.
⚫ NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
⚫ NEVER open more than one drawer at a time.
⚫ Place heaviest items in the lowest drawers.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
3
Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

M AX I M U M R E C O M M E N D E D W E I G H T L O AD S
MAXIMUM LOAD 22.7 kg / 50 lb
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Glass Door Library Cabinet
MODEL # TGTTMC
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED. USE
WITH LOADS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE
INJURY.
4

5
hardware
(H18) x 2
tipping restraint hardware kit
(inside plastic bag)
Spare hardware
(H9) x 6
door hinge
(H3) x 8
M8 x 30 mm wood dowel
(H1) x 8
Cam lock
(H2) x 8
Cam bolt
(H4) x 24
M4 x 12 mm bolt
(H8) x 2
knob
(H7) x 2
Knob bolt
(H10) x 2
door catch (H11) x 8
shelf support
(H12) x 30
M3.5 x 12 mm
flat head screw
(H13) x 24
M3.5 x 15 mm
washer head screw
(H15) x 8
cam lock cover
(H16) x 1
large hex wrench
(H14) x 5
M4 x 35 mm screw
(H17) x 1
small hex wrench
(H5) x 8
1/4” x 5/8” bolt
(H6) x 8
1/4” x 1-1/4” bolt

exploded diagram
ITEM DESCRIPTION QTY
ATop panel 1
BAdjustable shelf 2
CBottom panel 1
DMiddle stretcher 2
EBottom stretcher 1
FBack panel 1
GSide frame 2
HLeft side panel 1
IRight side panel 1
JLeft door 1
KRight door 1
LTop stretcher 1
6
K
J
D
G
H
I
B
G
F
C
A
D
E
B
L

how to use the cam lock system
1. 2. 3.
4. 5.
1. 2. 3.
Screw cam bolt into panel Push cam into panel - arrow
feature on cam top points to
panel edge
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
Rotate cam(s) clockwise
190°-230° to lock panels
together
Panels should be tight against
each other and connection
should be rigid
190°-230°
7

step 1: Screw in the cam bolts
1.1. Securely screw the cam bolts into the designated small holes on the top and bottom panels (A and C).
8
(H2) x 8
cam bolt
H2
H2
H2
H2
H2
H2
A
C

9
2.1. Insert five 35 mm screws (H14) through the countersunk holes on the top stretcher (L) and securely screw into the top panel (A).
step 2: Fasten the top stretcher to the top panel
The countersunk holes face upward
A
H14
L
H14
H14
(H14) x 5
M4 x 35 mm screw

3.1. Using the pilot holes as a guide, attach two door catches (H10) to the top panel (A) as shown, with two 12 mm screws (H12) in each.
step 3: Attach the door catch to the top panel
The magnet faces forward
A
(H10) x 2
door catch
(H12) x 4
M3.5 x 12 mm
flat head screw
H10
H10
H12
H12
10

(H1) x 4
Cam lock
(H3) x 4
M8 x 30 mm wood dowel
step 4: Attach the side panels to the top panel
4.1. Insert two wood dowels (H3) into the top inner holes of each left and right side panels (H and I).
4.2. Secure the side panels (H and I) to the top panel (A) using four cam locks (H1).
A
H
I
H1
H1
H3
H3
11
The door hinge mounting holes
run against the front edge

step 5: Attach the bottom panel to the side panels
(H1) x 4
Cam lock
(H3) x 4
M8 x 30 mm wood dowel
5.1. Insert two wood dowels (H3) into the bottom inner holes of each left and right side panels (H and I).
5.2. Align and attach the bottom panel (C) to the side panels (H and I) using four cam locks (H3) as shown.
12
H3
H1
H1 H3
H3
H1
I
H
C

step 6: Attach the back panel to the frame
6.1. With the help of another adult, flip the previous assembly around on its front edges.
6.2. Align the back panel (F) with the pilot holes on the assembly as shown. Attach using the washer head screws (H13) provided.
CAUTION: Heavy! You may
need assistance with this step.
(H13) x 24
M3.5 x 15 mm
washer head screw
F
Adhesive tape faces outward
H13
13

7.1. Align and fit two middle stretchers (D) to one side frame (G) and secure with two 5/8” bolts (H5).
step 7: Attach the middle stretchers to the side frame
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
D
D
G
H5
H5
H5
D
(H16) x 1
large hex wrench
G
(H5) x 2
1/4” x 5/8” bolt
14

8.1. Attach the bottom stretcher (E) to the side frame (G) using two 5/8” bolts (H5).
step 8: Attach the bottom stretcher to the side frame
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
E
G
(H16) x 1
large hex wrench
H5
H5
(H5) x 2
1/4” x 5/8” bolt
15

9.1. Repeat the same procedure to attach the other side frame (G) at the opposite end.
step 9: Attach the other side frame to the stretchers
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
E
D
D
G
G
H5
H5
H5
G
D
D
(H16) x 1
large hex wrench
(H5) x 4
1/4” x 5/8” bolt
16

step 10: Attach the base to the bottom panel
10.1. Insert eight 1-1/4” bolts (H6) through the mounting holes on the middle stretchers (D and side frames (G) and screw into the bottom panel (C).
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
G
G
D
D
C
(H16) x 1
large hex wrench
H6
H6
(H6) x 8
1/4” x 1-1/4” bolt
17

step 11: Attach door hinges to the left door
(H9) x 3
door hinge
11.1. Align and attach 3 door hinges (H9) to the left door (J), using four 12 mm bolts (H4) per hinge as shown.
J
J
(H4) x 12
M4 x 12 mm bolt
(H17) x 1
small hex wrench
H9
H4
H4
18

step 12: Attach door hinges to the right door
(H9) x 3
door hinge
12.1. Align and attach 3 door hinges (H9) to the right door (K), using four 12 mm bolts (H4) per hinge as shown.
K
K
(H4) x 12
M4 x 12 mm bolt
(H17) x 1
small hex wrench
H9
H4
H4
19

step 13: Attach the doors and knobs
13.1. Ask for assistance to lift the assembled unit upright and position it near the final location.
13.2. Using the pilots holes as a guide, attach the left and right doors (J and K) to the side panels (H and I) respectively.
13.3. Fasten the knob (H8) to the front side of each doors (J and K ).
J
K
H8
(H8) x 2
knob
(H7) x 2
Knob bolt
(H12) x 18
M3.5 x 12 mm
flat head screw
H7
H12
J
H9
CAUTION: Heavy! You may
need assistance with this step.
20
K