Threshold STUDIO MCGEE TGT63BK User manual

>> Assembly instructions
TM
© 2021 Target. The Bullseye Design is a trademark of Target Brands, nc. All rights reserved.
Bountiful Wood and Glass Tall Cabinet
Style #: TGT63BK
DPC-item #: 249-17-0038

Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
Good luck – though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a work surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
tool needed (only hex wrench included)
2
For tipping restraint hardware kit only.
Phillips head
screwdriver
Hex wrench

Children have died from furniture tipover.
To reduce the risk of furniture tipover:
 ALWAYS install tipover restraint provided.
 NEVER put a TV on this product.
 NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
 NEVER open more than one drawer at a time.
 Place heaviest items in the lowest drawers.
se of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
3
Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPC number ready when calling. Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPC number ready when calling.
F RNIT RE TIPPING RESTRAINT
YOUNG CH LDREN MAY BE NJURED BY T PP NG FURN TURE AND YOU MUST USE TH S T PP NG
RESTRA NT TO ATTACH TH S UN T TO THE WALL, TO PREVENT ACC DENTS AND/OR NJUR ES.
TO PROV DE PROTECT ON AGA NST THE UNEXPECTED T PP NG OF
FURN TURE DUE TO MPROPER USE.
USE OF T P-OVER RESTRA NTS MAY ONLY REDUCE, BUT NOT EL M NATE, THE R SK OF T P-OVER.

M AX I M M R E C O M M E N D E D W E I G H T L O A D S
MAX MUM LOAD 22.7 kg / 50 lb
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Bountiful Wood and Glass Tall Cabinet
MODEL # TGT63BK
TH S UN T S NTENDED ONLY FOR USE W TH N THE MAX MUM WE GHTS ND CATED. USE
W TH LOADS HEAV ER THAN THE MAX MUM WE GHTS ND CATED MAY RESULT N NSTAB L TY, CAUS NG POSS BLE
NJURY.
4

5
hardware
Spare hardware
(H1) x 8
cam lock
(H2) x 8
cam bolt
(H4) x 24
M4 x 12 mm bolt
(H8) x 4
Small bolt
(H5) x 4
1/4” x 3/4” bolt
(H3) x 12
M8 x 30 mm
wood dowel
(H6) x 4
lock washer
(H7) x 4
flat washer
(H10) x 2
knob
(H9) x 2
Knob bolt
(H11) x 6
door hinge
(H12) x 2
door catch
(H13) x 2
roller catch
(H14) x 2
roller catch
metal plate
(H15) x 12
shelf support
(H16) x 26
M3.5 x 12 mm
flat head screw
(H17) x 20
M3.5 x 15 mm
washer head screw
(H20) x 2
tipping restraint hardware
kit (inside plastic bag)
(H19) x 1
large hex wrench
(H18) x 1
small hex wrench

exploded diagram
TEM DESCR PT ON QTY
A Top panel 1
B Shelf 3
C Bottom panel 1
D Top back stretcher 1
E Back panel 1
F Left side frame 1
G Right side frame 1
H Left door 1
Right door 1
6
B
D
H
B
G
F
C
A
E
B

how to use the cam lock system
1. 2. 3.
4. 5.
1. 2. 3.
Screw cam bolt into panel Push cam into panel - arrow
feature on cam top points to
panel edge
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
Rotate cam(s) clockwise
190°-230° to lock panels
together
Panels should be tight against
each other and connection
should be rigid
190°-230°
7

step 1: Prepare the frame assembly
1.1. Securely screw the cam bolts into the designated small holes on the top panel (A) and side frames (F and G).
Note: The cam bolts must be screwed down flush.
8
(H2) x 8
cam bolt
H2
H2
H2
H2
H2
H2
A
F
G

2.1. Using the pilot holes as a guide, attach two door catches (H12) to the top panel (A) as shown, with two 12 mm screws (H16) in each.
step 2: Attach the door catches to the top panel
(H12) x 2
door catch
(H16) x 4
M3.5 x 12 mm
flat head screw
9
H12
H12
H16
A
H16
The magnet faces forward

10
3.1. Using the pilot holes as a guide, Fasten two roller catch metal plates (H14) to the bottom panel (C) using two 12 mm screws (H16) in each.
(H14) x 2
roller catch
metal plate
(H16) x 4
M3.5 x 12 mm
flat head screw
step 3: Attach the roller catch metal plates to the bottom panel
The projection faces forward
H14
H16
H16
H14
C

(H1) x 6
cam lock
(H3) x 6
M8 x 30 mm wood dowel
step 4: Attach top back stretcher and bottom panel to the side frames
4.1. Attach the bottom panel (C) to the right side frame (G) using two cam locks (H1) and two wood dowels (H3).
4.2. Attach the top back stretcher (D) to the right side frame (G) using one cam lock (H1) and one wood dowel (H3).
4.3. Repeat the same procedure to attach the left side frame (F) at the opposite end.
11
G
G
C
H3
C
D
G
H1
H1
H3
D
F
F
F
The cam locks faces outward

step 5: Install the top panel
(H1) x 2
cam lock
(H3) x 6
M8 x 30 mm
wood dowel
5.1. nsert the wood dowels (H3) into the inner holes on the side frames (F and G) and the top back stretcher (D).
5.2. Secure the top panel (A) to the top back stretcher (D) using two cam locks (H1).
5.3. Fasten the top panel (A) to the side frames (F and G) using four bolts (H5) and four washers (H6 and H7).
12
(H6) x 4
lock washer
(H7) x 4
flat washer
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
(H19) x 1
large hex wrench
H1
D
G
F
H3
H3
H3
A
A
H5
H6
H7
A
D
(H5) x 4
1/4” x 3/4” bolt

step 6: Attach the back panel to the unit
6.1. Now, go back and tighten all cam locks and screws. Make sure that all the parts are tight and there are no gaps between the parts. This will help keep
the unit square.
6.2. Unfold the back panel (E) and position it onto the back edges of the assembly. Make sure that the overlaps on the panels are even all the way around.
Secure the back panel (E) in place with the washer head screws (H17) provided.
NOTE: We recommend attaching back panel with the screws at the corners first.
CA TION: Heavy! You may
need assistance with this step.
(H17) x 20
M3.5 x 15 mm
washer head screw
13
H17
Adhesive tape faces outward
E
H17
H17

step 7: Install door hinges
(H11) x 6
door hinge
7.1. Align and attach the door hinges (H11) to the doors (H and ), using four 12 mm bolts (H4) per hinge as shown.
(H4) x 24
M4 x 12 mm bolt
(H18) x 1
small hex wrench
14
NOTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
H11
H
H
H4
H4

15
step 8: Attach the roller catches
8.1. Fasten the roller catches (H13) to the doors (H and ).
The roller faces bottom edge
The roller faces bottom edge
H
(H8) x 4
Small bolt
(H13) x 2
roller catch
H8
H13
H13
H8

step 9: Attach the doors and knobs
9.1. Ask for assistance to lift the assembled unit upright and position it near the final location.
9.2. Using the pilots holes as a guide, attach the left and right doors (H and ) to the side panels (F and G) respectively.
9.3. Fasten the knob (H10) to the front side of each doors (H and ).
CA TION: Heavy! You may
need assistance with this step.
16
H16
H9
(H10) x 2
knob
(H9) x 2
Knob bolt
(H16) x 18
M3.5 x 12 mm
flat head screw
H10
H
H

17
NOTE: Open and close the doors and adjust the gaps to make sure they are aligned and shut correctly.
f you find that the doors do not close properly or do not align correctly, please follow these steps:
10.1. Adjust the floor levelers pre-attached underneath the side frames (F and G) to level the doors.
10.2. The magnetic catches (H12) and the roller catch metal plates (H14) can be adjusted to ensure that the doors function properly. This can be done by
moving the catches forward and back.
10.3. Open the doors and loosen the installed screws (H16) on the door hinges (H11) and adjust properly for a good fit.
10.4. Once the doors function properly, go back and tighten all the screws.
step 10: Correct the doors alignment
Floor leveler
G
F
H11
H16
H12
A
H
H14

step 11: Install the adjustable shelves
11.1. nsert 12 shelf supports (H15) into the assembly. Make sure you place the four shelf supports in the same level so
the shelf is not tilted.
11.2. Tilt and rest the shelves (B) on the shelf supports (H15).
(H15) x 12
shelf support
18
B
H15
H15
B
B

step 12: Attach tipping restraint hardware
(H20) x 2
tipping restraint hardware kit
(inside plastic bag)
19
Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit.
12.1. Adjust the pre-attached floor levelers to level the unit against a wall.
12.2. Follow the instructions printed on plastic bag containing tipping restraint hardware to attach tip-over restraint between the unit and the wall.
NOTE: Share the back panel screw hole for the anti-tipping hardware. You must use this tipping restraint to attach this unit to the wall, to prevent accidents
and / or injures.
Floor leveler
Metal bracket Long screw
Short screw
Wall
Wall
Wooden stud

Care and Maintenance
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.
 Stains or marks from crayons or ink markers will be difficult to remove.
 n the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
 Check bolts/screws and nuts periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
t is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and
splitting of wood. t is advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
Q ALITY G ARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase.
Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific al rights and you may also have other rights which vary from state to state or province to province.
Customer Service: 1-855-MYTGTHOME (855-698-4846)
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenfurniture.com
20