Threshold TGTD42-3 User manual

>> Assembly instructions
TM
Conway Console Table
Style # TGTD42-3
DPC-item # 249-1 -2888
© 2021 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
Good luck – though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a work surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
2
tool needed (only hex wrench included)
For tipping restraint hardware kit only.
Phillips
screwdriver
Hex wrench

hardware
(H3) x 2
tipping restraint hardware kit
(inside plastic bag)
3
(H1) x 16
1/4” x 15 mm bolt
(H2) x 1
hex wrench
Spare hardware

4
exploded diagram
E
D
A
B
C
ITEM DESCRIPTION QTY
A Top panel 1
B Left side frame 1
C Back support 1
D Middle shelf 1
E Base 1
F Right side frame 1
F

5
OTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
step 1: attach the side frames
1.1. Align and attach the side frames (B and F) to the base (E) using four 15 mm bolts (H1).
(H1) x 4
1/4” x 15 mm bolt
(H2) x 1
hex wrench
The threaded sockets face back
of the unit with the flat edges
H1
B
H1
E
F

OTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
6
step 2: attach the top panel
2.1. Orient and attach the top panel (A) to the side frames (B) using four 15 mm bolts (H1).
H1
H1
A
(H1) x 4
1/4” x 15 mm bolt
(H2) x 1
hex wrench
B
F
The flat edges face in the same direction

OTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
step 3: attach the back support
C
A
B
H1
H1
H1
C
B
(H2) x 1
hex wrench
3.1. Align and attach the back support (C) to the side frames (B and F) using four 15 mm bolts (H1).
F
F
(H1) x 4
1/4” x 15 mm bolt

OTE: DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
8
step 4: attach the middle shelf
4.1. Attach the middle shelf (D) to the middle rails of the side frames (B and F) using four 15 mm bolts (H1).
H1
D B
D
H1
(H2) x 1
hex wrench
H1
F
(H1) x 4
1/4” x 15 mm bolt

(H3) x 2
tipping restraint hardware kit
(inside plastic bag)
9
step 5: attach tip-over restraint
5.1. Follow the instructions printed on plastic bag containing tipping restraint hardware to attach tip-over restraint between the unit and wall.
OTE: You must use this tipping restraint to attach this unit to the wall, to prevent accidents and/or injures.
Wall
Wall
Long screw
Metal bracket
Short screw
Nylon strap
Wooden stud
Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit (not provided).

Care and Maintenance
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.
 Stains or marks from crayons or ink markers will be difficult to remove.
 In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
 Check bolts/screws and nuts periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and
splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARA TEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase.
Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.
Customer Service: 1-855-MYTGTHOME (855-698-4846)
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenfurniture.com
10

M A X I M U M R E C O M M E D E D W E I G H T L O A D S
MAXIMUM LOAD 22. kg / 50 lb
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Conway Console Table
MODEL # TGTD42-3
11
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED. USE
WITH LOADS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE
INJURY.
MAXIMUM LOAD 45.4 kg / 100 lb

Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys
placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.
EVER allow children to climb or play with the TV or furnishing supporting the TV.
EVER place toys, food, remote, etc. on top of the TV or TV furnishing.
ALWAYS use either the safety hardware as instructed or other wall anchoring device.
Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment
may result in death or serious injury due to furniture collapse or over turning onto a child.
EVER place a TV on furniture that is not intended to support a TV.
EVER exceed the maximum size and weight of the TV shown in the instructions.
Be sure to refer to the TV warning label as shown in the instructions.
Overloading drawers and shelves may result in furniture that can break or sag, or tip-over which may result in injury.
EVER exceed the weight limits shown in the instructions.
Place the heavier items on lower shelves as far back from the front as possible.
Load the bottom surfaces first to avoid top-heavy furniture.
Moving furniture that is not designed to be moved or equipped with casters may result in injury or damage to furnishings or
personal property.
ALWAYS unload shelves and drawers, starting with the top surfaces, before moving.
EVER push or pull furniture on carpet. Have a friend help lift properly to move and/or reposition it.
The unit is not meant as a seat and no one should be sitting or standing on the top panel.
12
The maximum recommended weight allowance is 45.4 kg / 100 lb for top panel.
The maximum recommended weight allowance is 22.7 kg / 50 lb for shelves.

 Unit must be placed on a level surface or leveled with included hardware (when applicable).
 Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
 For safety reasons, it is imperative that this unit be mounted to the wall.
 Do not use without installing the tip restraint.
 Unit can tip over causing severe injury or death.
 Never open more than one drawer at a time.
 Do not exceed the recommended weight limits.
 Evenly distribute the weight on each level and always keep the heavier loads on the bottom.
 Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical,
plumbing and gas lines. Cutting may cause serious injury.
WAR I G
Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling. Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
FUR ITURE TIPPI G RESTRAI T
YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST USE THIS TIPPING
RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.
TO PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF
FURNITURE DUE TO IMPROPER USE.
USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE, THE RISK OF TIP-OVER.