Timeguard TG24 User manual

Operating Instructions
24 Hour
Segment Timeswitch
Model: TG24

1
1. General Information
These instructions should be read carefully
and retained for further reference and maintenance.
2. Safety
• Do not plug in any appliance that exceeds
the capacity of the Timer.
• Always ensure the plug of any appliance
is fully inserted into the timer outlet.
• If cleaning of the timer is required, remove from
mains power and wipe timer with a dry cloth.
• Do not immerse in water or any other liquid.
• For indoor use only.

2
3. Technical Specifications
• 230V AC 50 Hz
• Switch Rating: 13A Resistive (3kW)
400W Filament Lighting
100W CFL Lighting
60W LED Lighting
• Operating Temperature: 0°C to +40°C
• Manual Override for continuous ON operation
• CE Compliant
• Dimensions (H x W x D): 78mm x 75mm x 72mm
Note: Not suitable for use with Discharge Lighting.

3
Manual
override
switch
Time of day
pointer
ON segments
(pushed down)
Tough flame
retardant
casing
Time of day
setting ring
Appliance
socket
Time control segments 1 segment = 15 minutes
Push all segments downwards for ON, leave in
upward position for OFF.
Diagram A

4
Segment shown in ON
(lower) position
Segment shown in OFF
(upper) position
Diagram B
4. Operation
• Decide what times you would like the TG24
to switch ON and OFF.
• Push the segments down for the duration
of an ON period (see diagram ‘B’).
• Pull the segments up for the duration
of an OFF period (see diagram ‘B’).

5
Override
switch
Permanently
ON
Timed
Diagram C
• The minimum switching interval is 15 minutes,
and this can be increased in 15 minute steps.
• Ensure that the override switch is in the timed
position by moving the slide switch to the ‘Clock’
symbol (see Diagram ‘C’).

6
• Set the correct time of day by rotating the dial
clockwise until the correct time is indicated by
the ‘time of day pointer’ (See Diagram ‘A’).
• Plug the TG24 into a live socket.
• Plug your appliance into the TG24 and switch ON
the appliance. The TG24 will now repeat the set
programme day after day indefinitely.

7
Points to note;
• The segment dial can be turned even
when the time controller is operating.
• After a power failure, re-adjust the time
controller to the correct time of day,
turning the dial in a clockwise direction.

8
5. Permanent Override
• You are able to override the programmed settings
for continuous ON operation using the main slide
switch (See diagram ‘A’).
• When the slide switch points towards the ‘Clock’
symbol the unit will operate normally
as a Timeswitch.
• When the slide switch points towards the ‘ON’
symbol the unit will be ON continuously.
• You can operate the slide switch by sliding
it up or down.

9
3 Year Guarantee
In the unlikely event of this product becoming faulty
due to defective material or manufacture within
3 years of the date of purchase, please return it to
your supplier in the first year with proof of purchase
and it will be replaced free of charge. For the second
and third years or any difficulty in the first year
telephone the helpline on 020 8450 0515.
Note: A proof of purchase is required in all cases.
For all eligible replacements (where agreed by
Timeguard) the customer is responsible for all
shipping/postage charges outside of the UK.
All shipping costs are to be paid in advance
before a replacement is sent out.

10

67-058-151 (Issue 2)
Timeguard Limited.
Victory Park, 400 Edgware Road, London NW2 6ND
Sales Office: 020 8452 1112 or email [e-mail]
For a product brochure please contact:
Qualified Customer Support Co-ordinators will be on-line
to assist in resolving your query.
If you experience problems, do not immediately return the unit to
the store. Telephone the Timeguard Customer Helpline;
HELPLINE 020 8450 0515
or email [e-mail]
www.timeguard.com
Zerofour – March 2016