Timeguard TS830 User manual

5 6
OPERATING
INSTRUCTIONS
Points to note:
G The segment dial can be turned even when the time
controller is operating.
G In case of power failiure, re-adjust the time controller to the
correct time of day, turning the dial in a clockwise direction.
Important
This time controller is recommended for general domestic
appliances up to 13 amp resistive or amp inductive rating.
Certain washing machines eg those with built-in delay timers
and some electronic machines require permanently connected
power and they cannot use this time controller.
Specifications
Operating Temp: 0°C to 40°C
Operating Voltage: 220-240V AC 0Hz
Switch Rating: 240V AC 13 amp resistive (3kW)
amp inductive
Filament 300W
Conforms to Directives: 73/23/EEC & 89/336/EEC
Not suitable for fluorescent, low energ or discharge lighting.
3 Year Guarantee
In the unlikely event of this product becoming faulty, due to defective material or
manufacture, within 3 years of the date of purchase, please return it to your supplier
with proof of purchase and it will be replaced free of charge.
Should ou encounter an difficult please
contact our helpline on 020 8450 0515.
24 HOUR
SEGMENT
TIMESWITCH
Cat No. TS830
HELPLINE
020-8450-0515
For a product brochure please contact:
Timeguard Ltd.
Victory Park, 400 Edgware Road,
London NW2 6ND Tel: [phone]
or email [email protected]
Manufactured in the U.K. 67-0 8-39 (ISS 2)

1
2
4
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
6
5
4
3
2
1 2 3 4
Time
indicator
Switching
indicator &
self-cancelling
override
1=ON
0=OFF
Tough flame
retardant casing
24 hour
rogramme
ring
Protective
lobes
Time control segments 1 ta et = 15 minutes
Push towards rogramme ring = ON
Push away from rogramme ring = OFF
Front socket
face
TS830 24 Hour Segment Timeswitch Setting Instructions
Turn the segment dial clockwise until the correct time of day is
showing directly above the time indicator (the illustration shows
19.30 hours).
Decide what time you would like the time controller to switch
your a liance ON and OFF. Sim ly ush the segment ta ets
towards the time ring to set your ON times and away from the
time ring for your OFF times. (The illustration above shows the
time controller set to switch ON at 20.00 hours and OFF at 22.30
hours). These settings automatically o erate the switching
indicator when the time controller is in its o erating condition.
The switching indicator will show the switching condition
1=ON. 0= OFF. Minimum setting intervals = 15 minutes (one
ta et segment).Minimum time between settings = 15 minutes.
Check your rogramme by manually turning the segment dial
through a 24 hour cycle. Remember to re-set the dial back to the
correct time of day. Sim ly lug the time controller into a socket
and lug the a liance into the time controller. Switch on the
socket and the a liance. The time controller is now in its
o erating condition.
Manual Override
You can switch your a liance ON and OFF at any time by
using the self-cancelling switching rider on the to left of the
unit. Sim ly turn anti-clockwise so the switching indicator on
the front of the unit is ositioned to either the 1=ON or 0=OFF
osition as illustrated. The override automatically cancels when
the next ON/OFF rogramme o erates.
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
2
4
2
3
2
2
2
1
2
0
1
2
Switching ON before selected time
ON
OFF
Switching
rider
Switching OFF before selected time

1
2
4
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
6
5
4
3
2
1 2 3 4
Time
indicator
Switching
indicator &
self-cancelling
override
1=ON
0=OFF
Tough flame
retardant casing
24 hour
rogramme
ring
Protective
lobes
Time control segments 1 ta et = 15 minutes
Push towards rogramme ring = ON
Push away from rogramme ring = OFF
Front socket
face
TS830 24 Hour Segment Timeswitch Setting Instructions
Turn the segment dial clockwise until the correct time of day is
showing directly above the time indicator (the illustration shows
19.30 hours).
Decide what time you would like the time controller to switch
your a liance ON and OFF. Sim ly ush the segment ta ets
towards the time ring to set your ON times and away from the
time ring for your OFF times. (The illustration above shows the
time controller set to switch ON at 20.00 hours and OFF at 22.30
hours). These settings automatically o erate the switching
indicator when the time controller is in its o erating condition.
The switching indicator will show the switching condition
1=ON. 0= OFF. Minimum setting intervals = 15 minutes (one
ta et segment).Minimum time between settings = 15 minutes.
Check your rogramme by manually turning the segment dial
through a 24 hour cycle. Remember to re-set the dial back to the
correct time of day. Sim ly lug the time controller into a socket
and lug the a liance into the time controller. Switch on the
socket and the a liance. The time controller is now in its
o erating condition.
Manual Override
You can switch your a liance ON and OFF at any time by
using the self-cancelling switching rider on the to left of the
unit. Sim ly turn anti-clockwise so the switching indicator on
the front of the unit is ositioned to either the 1=ON or 0=OFF
osition as illustrated. The override automatically cancels when
the next ON/OFF rogramme o erates.
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
2
4
2
3
2
2
2
1
2
0
1
2
Switching ON before selected time
ON
OFF
Switching
rider
Switching OFF before selected time

1
2
4
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
6
5
4
3
2
1 2 3 4
Time
indicator
Switching
indicator &
self-cancelling
override
1=ON
0=OFF
Tough flame
retardant casing
24 hour
rogramme
ring
Protective
lobes
Time control segments 1 ta et = 15 minutes
Push towards rogramme ring = ON
Push away from rogramme ring = OFF
Front socket
face
TS830 24 Hour Segment Timeswitch Setting Instructions
Turn the segment dial clockwise until the correct time of day is
showing directly above the time indicator (the illustration shows
19.30 hours).
Decide what time you would like the time controller to switch
your a liance ON and OFF. Sim ly ush the segment ta ets
towards the time ring to set your ON times and away from the
time ring for your OFF times. (The illustration above shows the
time controller set to switch ON at 20.00 hours and OFF at 22.30
hours). These settings automatically o erate the switching
indicator when the time controller is in its o erating condition.
The switching indicator will show the switching condition
1=ON. 0= OFF. Minimum setting intervals = 15 minutes (one
ta et segment).Minimum time between settings = 15 minutes.
Check your rogramme by manually turning the segment dial
through a 24 hour cycle. Remember to re-set the dial back to the
correct time of day. Sim ly lug the time controller into a socket
and lug the a liance into the time controller. Switch on the
socket and the a liance. The time controller is now in its
o erating condition.
Manual Override
You can switch your a liance ON and OFF at any time by
using the self-cancelling switching rider on the to left of the
unit. Sim ly turn anti-clockwise so the switching indicator on
the front of the unit is ositioned to either the 1=ON or 0=OFF
osition as illustrated. The override automatically cancels when
the next ON/OFF rogramme o erates.
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
2
4
2
3
2
2
2
1
2
0
1
2
Switching ON before selected time
ON
OFF
Switching
rider
Switching OFF before selected time

1
2
4
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
6
5
4
3
2
1 2 3 4
Time
indicator
Switching
indicator &
self-cancelling
override
1=ON
0=OFF
Tough flame
retardant casing
24 hour
rogramme
ring
Protective
lobes
Time control segments 1 ta et = 15 minutes
Push towards rogramme ring = ON
Push away from rogramme ring = OFF
Front socket
face
TS830 24 Hour Segment Timeswitch Setting Instructions
Turn the segment dial clockwise until the correct time of day is
showing directly above the time indicator (the illustration shows
19.30 hours).
Decide what time you would like the time controller to switch
your a liance ON and OFF. Sim ly ush the segment ta ets
towards the time ring to set your ON times and away from the
time ring for your OFF times. (The illustration above shows the
time controller set to switch ON at 20.00 hours and OFF at 22.30
hours). These settings automatically o erate the switching
indicator when the time controller is in its o erating condition.
The switching indicator will show the switching condition
1=ON. 0= OFF. Minimum setting intervals = 15 minutes (one
ta et segment).Minimum time between settings = 15 minutes.
Check your rogramme by manually turning the segment dial
through a 24 hour cycle. Remember to re-set the dial back to the
correct time of day. Sim ly lug the time controller into a socket
and lug the a liance into the time controller. Switch on the
socket and the a liance. The time controller is now in its
o erating condition.
Manual Override
You can switch your a liance ON and OFF at any time by
using the self-cancelling switching rider on the to left of the
unit. Sim ly turn anti-clockwise so the switching indicator on
the front of the unit is ositioned to either the 1=ON or 0=OFF
osition as illustrated. The override automatically cancels when
the next ON/OFF rogramme o erates.
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
2
4
2
3
2
2
2
1
2
0
1
2
Switching ON before selected time
ON
OFF
Switching
rider
Switching OFF before selected time

5 6
OPERATING
INSTRUCTIONS
Points to note:
G The segment dial can be turned even when the time
controller is operating.
G In case of power failiure, re-adjust the time controller to the
correct time of day, turning the dial in a clockwise direction.
Important
This time controller is recommended for general domestic
appliances up to 13 amp resistive or amp inductive rating.
Certain washing machines eg those with built-in delay timers
and some electronic machines require permanently connected
power and they cannot use this time controller.
Specifications
Operating Temp: 0°C to 40°C
Operating Voltage: 220-240V AC 0Hz
Switch Rating: 240V AC 13 amp resistive (3kW)
amp inductive
Filament 300W
Conforms to Directives: 73/23/EEC & 89/336/EEC
Not suitable for fluorescent, low energ or discharge lighting.
3 Year Guarantee
In the unlikely event of this product becoming faulty, due to defective material or
manufacture, within 3 years of the date of purchase, please return it to your supplier
with proof of purchase and it will be replaced free of charge.
Should ou encounter an difficult please
contact our helpline on 020 8450 0515.
24 HOUR
SEGMENT
TIMESWITCH
Cat No. TS830
HELPLINE
020-8450-0515
For a product brochure please contact:
Timeguard Ltd.
Victory Park, 400 Edgware Road,
London NW2 6ND Tel: [phone]
or email [email protected]
Manufactured in the U.K. 67-0 8-39 (ISS 2)

5 6
OPERATING
INSTRUCTIONS
Points to note:
G The segment dial can be turned even when the time
controller is operating.
G In case of power failiure, re-adjust the time controller to the
correct time of day, turning the dial in a clockwise direction.
Important
This time controller is recommended for general domestic
appliances up to 13 amp resistive or amp inductive rating.
Certain washing machines eg those with built-in delay timers
and some electronic machines require permanently connected
power and they cannot use this time controller.
Specifications
Operating Temp: 0°C to 40°C
Operating Voltage: 220-240V AC 0Hz
Switch Rating: 240V AC 13 amp resistive (3kW)
amp inductive
Filament 300W
Conforms to Directives: 73/23/EEC & 89/336/EEC
Not suitable for fluorescent, low energ or discharge lighting.
3 Year Guarantee
In the unlikely event of this product becoming faulty, due to defective material or
manufacture, within 3 years of the date of purchase, please return it to your supplier
with proof of purchase and it will be replaced free of charge.
Should ou encounter an difficult please
contact our helpline on 020 8450 0515.
24 HOUR
SEGMENT
TIMESWITCH
Cat No. TS830
HELPLINE
020-8450-0515
For a product brochure please contact:
Timeguard Ltd.
Victory Park, 400 Edgware Road,
London NW2 6ND Tel: [phone]
or email [email protected]
Manufactured in the U.K. 67-0 8-39 (ISS 2)

5 6
OPERATING
INSTRUCTIONS
Points to note:
G The segment dial can be turned even when the time
controller is operating.
G In case of power failiure, re-adjust the time controller to the
correct time of day, turning the dial in a clockwise direction.
Important
This time controller is recommended for general domestic
appliances up to 13 amp resistive or amp inductive rating.
Certain washing machines eg those with built-in delay timers
and some electronic machines require permanently connected
power and they cannot use this time controller.
Specifications
Operating Temp: 0°C to 40°C
Operating Voltage: 220-240V AC 0Hz
Switch Rating: 240V AC 13 amp resistive (3kW)
amp inductive
Filament 300W
Conforms to Directives: 73/23/EEC & 89/336/EEC
Not suitable for fluorescent, low energ or discharge lighting.
3 Year Guarantee
In the unlikely event of this product becoming faulty, due to defective material or
manufacture, within 3 years of the date of purchase, please return it to your supplier
with proof of purchase and it will be replaced free of charge.
Should ou encounter an difficult please
contact our helpline on 020 8450 0515.
24 HOUR
SEGMENT
TIMESWITCH
Cat No. TS830
HELPLINE
020-8450-0515
For a product brochure please contact:
Timeguard Ltd.
Victory Park, 400 Edgware Road,
London NW2 6ND Tel: [phone]
or email [email protected]
Manufactured in the U.K. 67-0 8-39 (ISS 2)