• To adjust the starting massage position.
• Press the up & down arrow buttons after the computer has
completed the body scan. From this you have about 10 sec. to
readjust the starting position of the massage heads.
14. Air Intensity
• This button will allow for you to adjust the air pressure intensity
in both the manual or preset programs.
15. Full air pressure massage program
• This will initiate all the air bags to inflate sequentially massage
the from the hands to the feet.
16. Air pressure massage position
• This button will activate certain air massages to specific
regions. When you press this button it will alter the location of the
air massage.
17. Foot rollers
• Press once to activate the foot rollers. Press a second time and
it will stop.
18. Zero gravity/relax position
• When pressing this button it will take you to the zero gravity
reclined position.
19/20. Footrest raise and lower
• This button will allow you to raise or lower the legrest. Press
once to start motion and the press again to stop.
21/22. Recline and raising of the backrest
• This button controls the recline and raising of the backrest.
