TMG TMG-WB482D User manual

2
Important
When you open the cartons, carefully check the contents and make sure there is no damage. If you have
any problems or you find any parts damaged or missing, Please contact us first.
Do not return the product to the store before contacting us. Do not dispose of your cartons until you are
completely satisfied with your products.
To reduce the risk of injury, the user should read and understand this owner's manual before
assembling and using these products for the first time.
Safety Guidelines
Use two or more people to move, assemble, and install the product to avoid any
injury.
DO NOT leave children unattended near the product.
DO NOT stand on the product or lean on the drawers or worktop.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tools
could slip, which may cause personal injury.
DO NOT alter the product in any manner. For example, do not weld external
lock bars or attach unapproved electrical equipment. This may cause product damage, personal
injury, or death.
DO NOT OVERLOAD PRODUCTS ! The components of the product are designed
to maximum weight capacities 660lbs(300kgs).
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause product damage or personal injury.
High risk of tipping if the product is not installed correctly. Securely attach the
product to the wall to avoid serious injury.
Unpacking
1. Please make sure you have received all your packages for this product.
2. Start by placing the package on flat covered ground.
3. Remove all cardboard, honey comb board, foam packaging material and clear plastic bags.
4. Recycle all packaging materials.
5. Verify all the contents are included and gather the tools required.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION

3
Assembly Instructions
Parts List

Install the work bench
Note: We recommend at least 2 adults needed to finish the assembly.
1. Fasten legs to the bamboo top
Lay down the bamboo top on a soft surface, align the holes on the “L”bracket (2) with the insert nuts on the
bamboo top (1) , use twelve M8X16 hexagon socket bolts (4) to connecting them together.
Then fasten the eight “L”bracket to the legs with eight M8X65 hex bolts(3) and eight M8 nuts(11).
DO NOT tighten bolts completely.
2. Fasten support to the legs
Use four M8X65 hex bolts(3) and four M8 nuts(11) to fasten support to the legs.
DO NOT tighten bolts completely.

3. Install wheels
Please put the two wheels with brake on the front, so that open or close the brake more easier.
4. Tighten all the bolts
Once all the bolts are installed, tighten them completely.
5. Stand up the work bench
Note: Two or more adults are recommended to finish the step.
Please make sure close the brake before stand up the work bench.

6. Install the dividers and handle for the drawer.
Use M5X12 bolts (13) to install the handle of the drawer.
Put the two dividers on the drawer.

Maintenance
1. Periodically clean the work bench with mild detergent and water.
7. For safety, use a non-flammable cleaning fluid. Grease and oil can be removed with most
standard cleaning fluids.
8. Do NOT allow water and other fluids to remain on the work bench for any length of time.
9. DO NOT OVERLOAD PRODUCTS ! The components of the product are designed to maximum
weight capacities 660lbs(300kgs).