Foodservice Equipment
Job ________ Item# ________
1400 Toastmaster Drive, Elgin IL 60120-9272 USA - Tel: 847-741-3300 - Fax: 800-635-4725 - www.toastmastercorp.com
Freestanding, Hot Food Servers
Models 3A81D & 3D8XD
Form 206 Rev 0 (02/05)
Application
Hot food servers are designed to hold
cooked foods at a safe, thermometer
verified serving temperature and proper
moisture content. Hot food can be
placed into the drawer(s) either directly
or in separate open pans or containers.
Holding temperatures and moisture
content can be set for the type of food
being held.
General Information
Freestanding, drawer-type hot food
servers come in one,two, three or four
drawer models. Each drawer is
furnsihed with a removable, deep drawn
12” x 20” stainless steel pan. See
dimensional data and preheat chart on
reverse side. Models 3A81D and 3B82D
are furnished with 4” NSF listed,
adjustable legs.
Construction
The frame is of welded and reinforced
sheet steel. The exterior cabinet and
drawer fronts are of stainless steel with
aluminized steel inner lining. Drawers
are equipped with handle operated
latching mechanism and positive stop.
Drawers glide on third member
suspension system rails. Third members
have five (5) roller bearings (load
support) and five (5) guide bearings
(smooth operation) each (i.e. twenty (20)
bearings per drawer).
Insulation
Fully insulated on all six sides, including
drawer fronts, with blanket-type fiber
glass insulation.
Electrical
Provided with factory installed 3 ft cord
and plug: 120V NEMA 5-15P plug or
208/240V NEMA 6-15P plug. Available
in 120V or 208/240V units. Single phase
only. See electrical data chart on back
page.
Heating
Heating is accomplished with preformed
tubular heating elements. Model 3A81D
has one heating element located in the
bottom of the unit. Multiple drawer
model 3D8XD has two heating elements
located on the lower sides.
Controls
Temperature is regulated by hydraulic
thermostat adjustable from 100oF to
200oF, with “OFF” position. Thermostat
control is mounted on front below the
drawer(s) and is equipped with adjacent
signal light. Thermostat control knob is
protected by a knob guard on model
3A81D. Model 3D8XD has a thermostat
control knob mounted in a recessed
stainless steel mounting cup. Each
drawer is fitted with a moisture control
slide adjustment located at center front
above each warming drawer. A
FREESTANDING, HOT FOOD SERVERS - MODELS 3A81D & 3D8XD
thermometer accurately reflects the
temperature at the coolest point inside
the server. This safety feature ensures
that food products are being held at a
temperature above the bacterial growth
level, and at temperatures below those
that may overcook or dry-out food.
Capacity
Designed to hold precooked foods at
serving temperature, hot food servers
are ideal for baked potatoes,
vegetables, ribs, buns and rolls. Each
drawer holds one 12” x 20” pan, 5” deep.
Nominal capacities per drawer:
40 baked potatoes (120 count)
8 #10 cans vegetables
30 lb. ribs
6-1/2 doz. hamburger buns
7 doz. dinner rolls
No Quibble Warranty
Warranty includes one year parts and
labor, on-site service (USA only).
Ordering Information
!3A81D - 120V, 1 phase
!3A81D - 208/240V, 1 phase
!3D8XD - 120V, 1 phase
!3D8XD - 208/240V, 1 phase
Optional At Extra Cost
Legs are square design with adjustable
foot. Leveling adjustment is up to 3/4”.
Sets of four.
!3L6 Legs, 6” high stainless steel
!3L9 Legs, 9” high stainless steel
!3L12 Legs, 12” high stainless steel
!3L15 Legs, 15” high stainless steel
!3M4 Casters, 4-3/4” bumpered (2-
swivel, 2-fixed). Field installation
only.
!3M33 Casters, 3” (4-swivel, 2-with
brakes) with 3/8” threaded stem.
Fits (1) and (2) drawer models.
(May be used in lieu of 4” legs).
!ACCPANALL, Pan 22-9/16”W x 13-
7/16”D x 5-1/4”H.
3D8XD
