Topens DKC500 User manual

VER21bC030567
Sliding Gate Opener
User sManual
Model:
TOPENSWebsite
www.topens.com
Email: [e-mail]
DKC500(S/Y)
Please readand followallwarnings,precautionsand instructionsbefore
installation and use.
Neverconnectthesolarpanel tothecontrol board directlytochargethebattery.
Periodicchecksoftheopenerarerequiredtoensuresafeoperation.
Savethismanual.

CONTACTUS:
Visit: www.topens.com
Pleaserecordtheproduct model,your email address etc.
inthespaces providedbelow.Refer tothislistwhen contacting TOPENS
for technicalservice or assistancewithyour automaticgateopener.
Wheredidyou purchase?(Amazon.com;Amazon.ca:Amazon.co.uk,Amazon.de;Other, Please
Specify)
Order# ProductModel Purchase Date
Full Name Phone# Email Address (VERY
IMPORTANT)
StreetAddress,Apartment /Unit, City, State/Province, ZipCodeCountry/Region
ApproximateGateWeight
(pounds;kg:Other. Please
Specify)
ApproximateGateLength
(feet;meter;Other. Please
Specify)
Didyou purchaseany
accessories?(Pleaselist
below)
IssueDetails
Email Us: [e-mail]
Call:[phone] (TollFreeUSA&Canada)

TableofContents
CheckYour GatebeforeInstallation................................................................................................................. 1
GeneralSafety.................................................................................................................................................. 1
Preparationfor Installation ............................................................................................................................... 2
PartsList........................................................................................................................................................... 4
ExtraParts........................................................................................................................................................ 4
Accessories Parts(Included insomemodels, referstothe actualpackage).................................................. 5
OptionalAccessories PartsList (AvailableatTOPENS Store)........................................................................ 5
Replacement Parts........................................................................................................................................... 5
TechnicalSpecifications &Features................................................................................................................ 6
InstallationOverview........................................................................................................................................ 6
Installationofthe Opener................................................................................................................................. 7
ManualOperation............................................................................................................................................. 7
Installationofchainandchainbrackets........................................................................................................... 8
Installationofthe Magnets............................................................................................................................... 9
Connection ofthe Power Supply.................................................................................................................... 10
Connecting ofthe ControlBoard.................................................................................................................... 12
Settingofthe ControlBoard........................................................................................................................... 14
Test the Reversing Sensitivity........................................................................................................................ 16
How toProgramor Erasethe Remote........................................................................................................... 16
How toUsethe RemotetoOperateYour GateOpener................................................................................. 17
WirelessKeypad Programming...................................................................................................................... 17
Troubleshooting .............................................................................................................................................. 18
Maintenance ................................................................................................................................................... 19

1
Thankyou for purchasing our sliding gateopener.We aresurethat the productswill be greatlysatisfyingas
soon asyou start touse it.
The productissupplied withauser smanualwhich encloses installationand safetyprecautions.These
shouldbe read carefullybeforeinstallation and operation as theyprovide importantinformation aboutsafety,
installation,operation andmaintenance.Thisproductcomplieswiththe recognized technical standards and
safetyregulations.
Check Your Gate beforeInstallation
GeneralSafety
WARNING!Anincorrectinstallation orimproperuse ofthe productcancause damagetopersons,
animalsor properties.
•Scrappackingmaterials(plastic,cardboard,polystyrene etc.) according totheprovisions setoutbycurrent
standards. Keepnylon orpolystyrene bags out ofchildren sreach.
•Thisproductwas exclusivelydesigned andmanufactured forthe use specifiedinthe presentdocumentation.
Anyother use not specifiedinthisdocumentation coulddamagethe product and be dangerous.
•The factorydeclines all responsibilityforanyconsequences resulting from improperuse of the product, or
use which isdifferent from that expected and specified inthe present documentation.
•Donot install the productinexplosiveatmosphere.
•The factorydeclines allresponsibilityforanyconsequences resulting fromfailuretoobserveGood Technical
Practice when constructingclosingstructures (door,gates etc.), as well as fromanydeformation which might
occur during use.
•Disconnectthe electricalpowersupplybeforecarrying outanyworkon the installation.Also disconnectany
buffer batteries, if fitted.
•Fitan omnipolarormagnetothermal switch on themains powersupply,having acontactopening distance
equaltoor greater than 3,5mm.
•Make surearesidualcurrentcircuitbreakerwitha30mAthresholdisfitted beforethe powersupplymains.
•Checkthatearthing iscarried outcorrectly:connectall metalpartsforclosure(doors,gates etc.) and all
systemcomponentsprovided withan earthterminal.
•Fitall the safetydevices(photocells,electricedgesetc.) which areneeded toprotectthe area fromany
danger caused bysquashing, conveying andshearing.

2
•Positionat least one visibleindication device, and fixaWarningsigntothe structure.
•The factorydeclinesall responsibilitywithrespecttothe automationsafetyand correctoperation when
other supplier scomponentsareused.
•Onlyuse originalpartsfor anymaintenance or repair operation.
•Donot modifythe automation components, unlessexplicitlyauthorized bythe factory.
•Instructthe productuseraboutthecontrolsystemsprovidedand the manualopening operationincaseof
emergency.
•Donot allow persons or childrentoremaininthe automationoperation area.
•Keep radiocontrolorothercontroldevices outofchildren sreach,inordertoavoidunintentionalautomation
activation.
•Theusermustavoidanyattempttocarryoutworkorrepaironthe automationsystem,and alwaysrequest
the assistanceofqualifiedpersonnel.
•Anything which isnot expresslyprovided for inthepresent instructions isnot allowed.
•Beforeinstalling thegateopener,checkthatall moving part as wellas the sliding gateisingood mechanical
condition, correctlybalanced and opensand closes properly.
•Savethese instructions for futureuse.
Preparation forInstallation
Beforeproceeding toyouropenerinstallation,checkif yourgatestructureisinaccordance withthe current
standards, especiallyas follows:
The gateslidingtrackislinearand horizontal,and thewheelsaresuitable，thegateshouldbe mountedand
moving freely.Checkthatthe structureissufficientlystrong andrigid,Make surethatthe gateisplumband
level.The fencepostsmust be mounted inconcrete.The gatedoes not bindor drag on the ground.
•The opening andclosinggatestops arepositioned.
WARNING: Rememberthatcontroldevicesareintendedtofacilitategateoperation,butcan notsolve
problemsduetoanydefectsordeficiencyresultingfromfailuretocarryoutcorrectinstallation ormaintenance.
Takethe productoutofitspacking andinspectitfordamage.Shoulditbe damaged,contactyourdealer.
Remembertodispose ofitscomponents(cardboard,polystyrene,nylon,etc.) accordingtothe current
prescriptions.
RefertothefollowingFiguresforgateinstallation.

3
Insake of safety, apositivestop must bemountedonthetwoend ofgroundtrack.

4
PartsList
ExtraParts

5
Accessories Parts(Includedinsomemodels,referstotheactual package)
OptionalAccessoriesPartsList(Availableat TOPENSStore)
M12 RemoteControl ERM12 External
Receiver
TC186-RWiFi
Smartphone Remote
ControlwithCamera
TC186 WiFiSmartphone
RemoteControlwith
Camera
TKP3Wireless Keypad TC175PWiredKeypad TEW3VehicleSensor
ExitWand
HLR01HomeLinkRemote
ControlKit
TC173 WirelessPush
Button
TC147 WiredPush
Button
TRF3Reflection
PhotocellSensor
TC102 PhotoEyeBeam
Sensor
JD24VY24VWarning
Light
TSP30W30WSolar
PanelChargingKit
TCS3Solar Charge
Controller
LT08B20 Feet Roller
Chain
ReplacementParts
DKPYMJ1BControl
Board
PYMJ-CKG Limit Switch
WARNING: Changes ormodifications notexpresslyspecifiedbythisusermanual,TOPENS couldvoid
the warrantyofthisequipment.

6
TechnicalSpecifications&Features
Specifications
Model: DKC500(S/Y)
Power input: 110~120V/60Hzor 220~240V/50Hz
Motor voltage: 24VDC
Rated power: 180W
Gatemoving speed: 21 cm/s(8.3in/s)
Max gateweight: 600kg (1300lbs)
Environmentalconditions: -20~ +50(-4°Fto122°F)
Protection class: IP44
Features:
·Soft start and soft stop
·Midwaymode
·Quickselection for the gateopen/close direction
·Reliablerollingcodetechnologyfor remotecontrol
·Emergencyreleasekeyincase ofpowerfailure
·Stop incase ofobstructionduringgateopening
·Reverse incase ofobstruction duringgateclosing
·Built inadjustableauto-close (none, 30, 60, 90
seconds)
·Built inmax. MotorRunning Time(MRT) formultiple
safetyprotection (90 seconds)
·Reliableelectromagnetismlimit for easyadjustment
·Can beequipped withawide range accessories
·Easytoinstall,andminimummaintenance
requirement
·Getthe desiredchaintension byadjusting thechain
bolts
Installation Overview

7
Installation oftheOpener
Caution:
*Besurethattheopenerisinstalledinaleveland
paralleledposition. Improperinstallationcouldresult
inpropertydamage, severeinjury,and/ordeath.
*Beforestarting installation,ensurethatthereisno
pointoffriction duringtheentiremovementofthe
gateand thereisno dangerof derailment.
*Ensurethat thesafetysiderollersarepresent.
NecessaryTools: Thefollowingtoolsmaybe
necessarytoinstall the Gateopener. You willneed
screwdrivers,an electricdrill,wirecuttersand awire
stripper, asocketset, and possiblyaccess toa
welder.
Wheninstallthe opener, you shouldbuildaconcrete
pad tosupport the base plateofopenerinorderto
maintainproper stability.
Theinstallation proceedsareas follows:
1. Assemblethe Base Plateand fixthe Openertothe
BasePlate.
2.Digaholeforaconcretepad whichshouldbe
approximately60 x32 x35cm(24〞x13〞x14〞). It
mayprotrude 10 cm(4”)aboveground and 25 cm
(10”)indepthunderground.Increase the pad heightif
necessarytoprotectthe system from flooding,heavy
snow etc.
3. Prepareone ormoreconduitsforthe electrical
cables beforepourconcrete.Rememberthatcable
conduitshavetopassthrough the holeonthe base.
4. Pourconcreteand beforeitstartstoharden,check
that it isparalleltothe gateleafandperfectlylevel.
5. Marktheposition offourexpansion anchors
accordingtothe position ofmounting holeonthe base
plate.Doublecheckyourmarking,movethe base
plateand drillthe 4holes using a14mm(0.55”)
masonrybit. Put the 4expansion anchors(provided)intothe holes andfirmlytighten.
6.Mount thebaseplatetotheconcretePadand firmlytighten, enabling theopenerisfirmlysecured
on theconcretepadduring thewholegatetravel.
ManualOperation
You can openthe gatebymanualwhenpowerfailure.And the openershouldbe putinthe manual
(emergencyrelease) position beforefittingthe rack, installingthe opener andlimit switch. The process isas
follows:
Insert the ReleaseKeyandturnit inclockwise 90°, then pull therelease handleinclockwise 90°to
disengage the clutch between the gear shaft and motor. Now the opener isinthe manualoperation.

8
Installation ofchainand chainbrackets
1. ChainBrackets
1). Please refertobelowchainbracketsfigure,
which shows “U”bolt, “L”bracket and chainbolt.
Use the “U”bolts(squareorround)toattach the
chainbracketstogateframe.
2). IfBoththe squareboltsand round boltsarenot
fitforthe gateframe,use the appropriateboltsto
attach the chainbracketstogateframe.
2. Howtoinstall thechain
1). Placethe chainaround the top ofthe idler
wheelsand under the drivesprocket inchainbox.
2). Connectachainbolttoone end ofchainfrom
chainboxbyusing masterlink.Then insert the
chainbolttothe Lbracketand fixthemeach other
bywashersand nutstemporarily.(Nutswillbe
further adjusted for aproper chaintension later)
3). Connect secondchainbolt withanother end ofchainfromchainbox, then attach bolt tothe Lbracket on
oppositeend ofgateusingthe washersand nuts.
4). Make surethat the chainisline up exactlywiththe position wherethe chainon the chainidler wheel.
5). Removethe unwantedlengthofchain.Setappropriated chaintensionbyadjusting twochainboltsofthe
bothend.

9
6). The chainbracketsmust be mounted tothe sameheight as the chainonthe idler wheels.
7). Make surethereis1”distanceat least between the wheelcover and the gateafter you positionthe base
plate.
Installation oftheMagnets
Beforeinstall limitswitch,make surethe gateopenerisputinmanual operation.(the clutch connectedwith
gearshaftisdisengaged)and the mainspowersupplyisdisconnected.Positionthe twoMagnetComponents
approximatelyon the gateand movethe gatebyhand tofixtheminplace.
Fit magnetsbracket
Pushthe gatefullyclosedbyhand.Locateand install themagnetbracketsothatthe openerwillstop atthe
desired close position when the close limit switch approaches it.
Pushthe gatefullyopenbyhand.Locateand install themagnetbracketsothatthe openerwillstopatthe

10
desired open position whenthe open limit switch approaches it.
ThemagnetcomponentwithSpolemustbeinstalledatleft sideand the magnetcomponentwithN
polemust beinstalledatright sidefromtheviewinsideof property.
Ensuremagnet centertoalign withthemarkedlineabove!
The magnetsshouldbe 25~30mm (1-1.2 ) awayfromthe Limit SwitchBox.Ifitistoo nearortoo far, the
switches willfail towork.Adjustthe positionofthe magnetsuntilthe positionsoftheopening and closing
meet the requirement.
Connection ofthePowerSupply
WARNING:NEVERconnectthegateopenertothepoweroutletbeforeall theinstallationshave
beendone.
NOTE:
1.Ifbatteries as arechosenas thepowersource,MarineorAutomotiveTypeBatteryisrequired.The
batteries shouldbewaterproof type, orbeplacedinwaterproof circumstance.
2.2PCS 12VDCbatteriescanbeconnectedinseries tofunction as 24VDC.Thefollowing diagram
showson howtoconnect 2PCSbatteries inseries.
3.Please notethatthewireconnectionofthepowersupplysystemisveryimportant. Incorrectwire
connection will damagethecontrol board.
PowerMode1.Onlyuse theACelectricityas the
powersource
The powersupplycordshouldbe atleast3×0.75mm2(3C×18AWG). Connect
the livewire,neutralwireand earthwiretothe “L”, “N”and “PE”terminals
respectively.
NOTE:Thepowersupplycordisnot includedinthepackage.
PowerMode2.ByACelectricityand back-up batteries,onlyuse theAC
electricitytochargethebatteries
Ifthe ACelectricityfailurehappens rarely(less than8
hoursperday), then you can use minimum5Ah
2*12VDCbatteries as back-uppowersourceincaseof
AC powerfailure.Inthissituation,you can connectthe
AC electricityfollowingthe “PowerMode1”and the
batteries tothe BATterminalofthe controlboard
directlyas the below wiringdiagram.
Warning:Impropermagnetsinstallationmaycause thegatecrashintoend barrier,
whichisverydangerous!

11
PowerMode3.Onlyuse thebatteries asthepowersource,onlyuse the
solarpaneltochargethebatteries
Ifthe ACelectricityisnotavailable,then you canchoose the batteries asthe powersource and usethe solar
paneltocharge the batteries.The capacityofthe batteries shouldbe atleast12Ahandthe powerofthe solar
panelshouldbe atleast30Winthissituation.The gateopenercanrun for10 cyclesperdaywithout
connectinganyotheraccessories exceptpushbutton &warning lightif the localaveragesunshinetimeis
morethan 6hoursperday.The powerofthe solarpaneland the capacityofthebatteries shouldbe enlarged
if the localaveragesunshine timeisless than 6hoursperdayorusing one ofthe accessories (photocell,
externalreceiver,exitwand and keypad). Please provide us withmoredetailsofthe localsunshinecondition
and accessoriesneeds which wecan calculatethe configuration ofthe solarpanelandthe batteries.Please
connect the batteries&thesolar panels&solar controller refer tothe followingwiring diagram.
PowerMode4.ByACelectricityandback-up batteries,usetheAC
electricityandthesolar panel tochargethebatteriesat thesametime
Ifthe AC electricityfailurehappens frequentlyand lastsfor along time(maybe4-5daysone time), then you
can charge the batteries withthe ACelectricityand the solarpanelatthe sametime.The capacityofthe
batteries shouldbe atleast7Ahand the powerofthe solarpanelshouldbe atleast20Winthissituation.You
can connectthe ACelectricityfollowing the “PowerMode1”and the batteries &the solarpanels&solar
controller refer tothe following wiring diagram.

12
Connecting oftheControl Board

13
1. Motor
The YELLOW wireofthe motor shouldbe connectedintothe “1”terminal.
The RED wireofthe motor shouldbe connected intothe “2”terminal.
2. LimitSwitches
The YELLOW wireofthe limit switches shouldbe connectedintothe “3”terminal.
The BLACK wireofthe limit switches shouldbeconnectedintothe “4”terminal.
The RED wireofthe limit switches shouldbeconnected intothe “5”terminal.
3. Warning Light(Includedinsomemodels, referstotheactualpackage)
The WHITE wireofthe warning light shouldbeconnected intothe “6”terminal.
The RED wireofthe warning light shouldbe connected intothe “7”terminal.
4. PhotocellBeamSystem(PBS) (Includedinsomemodels, referstotheactual package)
Use a2-corecabletoconnectthe “-~ terminalofthe photocell semittertothe “19”terminal,the “+~
terminaltothe “18”terminal.Alsothe “-~ and “+~ terminalsofthephotocell sreceivershouldbe
connected tothe “19”and “18”terminalsinparallel.
Use another2-corecabletoconnectthe “NC terminalofthe receivertothe “13”terminal,the “COM
terminaltothe “12”terminal.
5. PushButton (optional)
The push button shouldbewired tothe “16 and “17”terminals.Nomatterthe polarity.The gateoperator
worksalternatelybypressing the button (open-stop-close-stop-open).
6. ExitWand (optional)
The BLACK wireofthe exit wand shouldbe connected intothe “14”terminal.
The BLUE wireofthe exit wand shouldbeconnectedintothe “15”terminal.
The RED wireofthe exit wand shouldbe connectedintothe “18”terminal.
The GREEN wireofthe exit wand shouldbe connected intothe “19”terminal.
The sensitivityadjustmentboardshouldbe wired tothe GREEN wireand the YELLOW wireofthe wand.No
matter the polarity.

14
7. Battery(ONLYincludedinYSeries)
The “24V+ ofthe batteryshouldbe wired tothe BAT+ (11)terminal, “24V- shouldbe wired to “-BAT (10)
terminal.Ifthe batteryhas been used withsolarpanel,please connectthe batteries and the solarpanel
&solar controller following the chapter of “Connectionof thePowerSupply”.
8. External Receiver(optional)
The BROWN wireofthe externalreceiver shouldbeconnected intothe “16”terminal.
The BLACK wireofthe externalreceiver shouldbeconnected intothe “17”terminal.
The RED wireofthe externalreceiver shouldbe connected intothe “18”terminal.
9. WiredKeypad(24VDC) (optional)
The RED wireofthe wired keypadshouldbeconnected intothe “18”terminal.
The BLACK wireofthe wired keypad shouldbe connected intothe “17”terminal.
The BLUE wireofthe wired keypad shouldbe connected intothe “16”terminal.
The PURPLE wireofthe wired keypad shouldbeconnected intothe “17”terminal.
NOTE:Using ofthephotocell, exit wand,keypadandexternalreceiverwouldcausethebattery
exhaustedquickly.Bigcapacityofbatteries and bigpowerofsolarpanelisrequiredif you wantto
use anyoneof them(If thebatteries andsolarpanel isusedas mainpowersupply).
Setting oftheControl Board
WARNING:EnsurethegateopenerisPowerOff whenyou make anyadjustmentofthegate
opener.Keepawayfromthepathofthegateduring you setthegateopenersystemincaseofthe
unexpectedgatemoving.CarefullyadjusttheDIPswitches toavoidtherisk ofmachinedamageand
injuryordeath.Alwaysask thehelpofprofessional technician/electricianif you haveanyquestion.
1. DIPSwitches
The DIPswitches areusedtoset the runningtimeofthe
motorinmidwaymode, fineadjust the soft stop period
ofthe motor, autoclose timeofthe gateopener and
fast changethe open/closedirection which is
determined bythe positionofthe gateopener installed.
DIPSwitch#1–#2:Running timeof themotorinMidwayMode
DIPSwitch#1:ON –2Seconds OFF –0
DIPSwitch#2:ON –4Seconds OFF –0
NOTE:Themidwaymodefunctionwouldbedisabledif bothDIPswitches areturnedoff. Factory
default setting isdisabled.Themidwaymodecouldbeactivatedbypressing button B oftheremote
controlwhenthegateisinthefull closedposition.
E.g.Runningtimeoftheopener inmidwaymodeis2+4=6seconds.

15
DIPSwitch#3–#5:Fineadjust thesoft stopperiod of themotor
DIPSwitch#3:ON –1SecondOFF –0
DIPSwitch#4:ON –2Seconds OFF –0
DIPSwitch#5:ON –3Seconds OFF –0
NOTE:Everytimeyou restart thegateopenerafterpoweroff, you shouldusetheaccess control
device (suchasremote,pushbutton andetc.)tooperatethegateopenertorun foracomplete
openingcycleand acompleteclosing cycletogetthefull openingtimeand thefull closing time.You
wouldachievethesoft stop inyournextopening/closing cycle.Factorydefault soft stop timeis3
Second.YoucanturntheDIPswitcheson/off tofineadjustthesoft stop timetomeetyouractual
needs.
DIPSwitch#6–#7:Autoclose timeof thegateopener
DIPSwitch#6:ON –30 Seconds OFF –0
DIPSwitch#7:ON –60 Seconds OFF –0
NOTE:Theautoclose function wouldbedisabledif bothDIPswitchesareturnedtooff (factory
default setting).
ImportantNote:Whentheautoclose functionisenabled,thephotocell sensorishighly
recommendedtobeinstalledwiththegateopenerforsafety.
DIPSwitch#8:Left/Right open
2. Potentiometers
PotentiometerA isused toadjustthe close stall forcethe gateoperator.Turnclockwise toincreasethe stall
force, and turnit counter-clockwise todecreasethe stall force.
PotentiometerB isused toadjustthe openstall forcethe gateoperator.Turnclockwise toincreasethe stall
force, and turnit counter-clockwise todecreasethe stall force.
WARNING:Photocell ishighlyrecommendedtobeinstalledwiththegateopeneras entrapment
protection forsafetywhenyou set stall force tomaximum.
E.g.The soft stop periodofthe motor is1+2=3seconds.
E.g.Autoclose timeofthe gateopener is30+60=90 seconds.

16
Test theReversing Sensitivity
Forthe sake of safety,itisveryimportanttotestthe reversing sensitivityas soon asthe controlboardsetis
finished.
The reversing sensitivityadjustmentisinverse correlation withstall forceadjustmentinpotentiometerAand
B. Inother word, the stall force levelishigher; the reversing sensitivitylevelislower.
Putan immobileobjectalong the gatepath,andthenoperatethe gatetostrikeit during the close cycles.The
gatemustreverse as soonas objectisstruckwithit. Ifthe gatedoesn treverse,please increase the reversing
sensitivitybyturning the potentiometerincounter-clockwisedirection.(Turningthe stallforce potentiometer
towardtoMINposition toincreasethe reversingsensitivity)
Note1:If thesensitivitysetting istoo higher,thegatewill stop orreverses veryeasybyitself while
thereislittleobstruction orresistance suchasstrongwindorheavy snowsometimes.
Note2:Alwayscheck thegatereversingfunctioneveryeachtimeofcontrolboardsetorrestart after
poweroff.
HowtoProgramor ErasetheRemote
† TheremoteMUST beprogramedtotheopenerBEFORE OPERATING. Please followthestepsto
programtheremote.
† Activatetheopeneronlywhengateisinfullview,free ofobstructionand properlyadjusted.No
oneshouldenterorleavegateareawhilegateisinmotion.DONOTALLOWCHILDRENtooperate
pushbuttonorremote. DO NOTALLOWCHILDRENTO PLAYNEARTHEGATE.
† If you purchase additionalremotecontrols,the gateopenermustbeprogrammedtoacceptthe
new remotecode.
† If you loseoneofanyremotecontrol, pleaseerase and reprogramall otherremotecontrolsto
haveanew codeforsafety.
†
Programtheremote
Press andrelease the learnbutton,the REM LED light
will be on,then pressthe keyinthe remote twotimes in
2seconds, betweenthetwotimes HOLDONFORA
MOMENT,the REMLED lightwillflash for4seconds.
Now the remotehas beenprogrammedsuccessfully.
Eraseall theremotecodes
Press and holdthe learnbutton untilthe REM LED light isoff. Now all remotecodes havebeen erased.
† NOTE: Max.8remotescanbeprogrammedfortheopener.AnExternalReceiver(optional) allowsup to
250pcs remotestobeprogrammedfortheopener.TOPENS ERM12UniversalExternalReceiveris
availableat TOPENSStore.
† TOPENSERM12 UniversalExternalReceiverisalsocompatiblewithotherbrand swinggateopener,
sliding gateopenerandgaragedooropener.

17
HowtoUse theRemote to OperateYour GateOpener
Eachremotehasfourbuttons,fromtoptobottomareseparatelyA,B,CandD.You
mayuse thisremotetooperateas manyas 4setsTOPENSswing gateopenersor 1
setTOPENS sliding gateopener and 2setsTOPENSswinggateopeners.
1. Use thisremotetoonlyoperateTOPENS swing gateopenerA,B,CandDfour
buttons sharesamefunction oncetheyareprogrammedwith
TOPENSswinggateopener.You maychooseanybutton toprogramitwithourswing
gateopener.Everypress ofthe button isabletoactivethe gateopenertowork
alternately(open-stop-close-stop-open).
2. Use one remotetooperateTOPENS swing gateopener&slidinggateopenerat
the sametime
AllofTOPENS sliding gateopenerhavemidwaymode.Button Bisdesigned torealizemidwayfunction(refer
tomoredetailsinourTOPENSsliding gateopenermanual). Soitismust programbutton Awithsliding gate
opener, whileyou mayprogrameither Cbutton orDbutton withTOPENSswinggateopener.
WirelessKeypadProgramming
You can followthe belowsteps toprogramwirelesskeypad tothe opener.Press the Learn button untilthe
REM LED isON,andthenreleases thebutton.Thenpress "OK"button on keypad and REM LEDwill flash
for3seconds and then be OFF whichindicates the keypad has been programmedsuccessfully.You canuse
the defaultpassword “888888”tooperatethe openerafterprogramming.You can press “PIN”“888888”
and then press “OK”toconfirmtooperatethe opener.
Alsoyou canchange thepasswordof thekeypadfollowthe belowsteps.Press “PIN”and then inputthesix
digitsoldpasswordand then press ”PIN”again, the REM LEDwillbe ON. Input the sixdigitsnew password
and thenpressthe “PIN”toconfirmthe newsetting, REM LEDwillflashfor3seconds and then be OFF
which indicatesthe passwordhas been changed successfully. You can press “PIN”“6digitsnewpassword”
and then press “OK”toconfirmtooperatethe opener.
NOTE: Everystep forpressing button during programmustbe finished within1secondtoensuresuccessful
programming.