Toro 02951 User manual

FormNo.3440-871RevA
SlopeSensorKit
LT3340TripleReelMowerorLT-F3000TripleFlailMower
ModelNo.02951
InstallationInstructions
Note:ThiskitisforStage5machinesonly.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal140-2710
140-2710
1.Warning—readtheOperator’sManual;afastashinglight
andalarmsoundingindicatesasteepslope;aslowashing
lightindicatesamoderateslope;nolightindicatesnormal
operatingconditions.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3440-871*

Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Preparethemachine.
Slopesensor1
Carriagebolt(1/4x2inches)2
Locknut(1/4inch)2
Spacer2
2
Slopesensordecal1
Installthekit.
3Fuse(2A)1Installthefuse.
4Nopartsrequired–Calibratethesensor.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Lowerthecuttingunit(s).
4.Shutoffthemachineandremovethekey.
2
InstallingtheKit
Partsneededforthisprocedure:
1Slopesensor
2Carriagebolt(1/4x2inches)
2Locknut(1/4inch)
2Spacer
1Slopesensordecal
Procedure
1.Raisetheplatform.Refertothetractionunit
Operator’sManual.
2.Removetheplasticbulkheadbehindtheseat.
3.Installtheslopesensortothemachineframe
with2carriagebolts(1/4x2inches),2spacers,
and2angenuts(1/4inch)tosecuretheslope
sensortothemachineframe(Figure1).
2

g338090
Figure1
1.Carriagebolt(1/4x2
inches)
4.Slopesnsor
2.Machineframe5.Locknut(1/4inch)
3.Spacer
4.Locatetheslopesensorconnectorinthemain
wireharnessandplugitintotheslopesensor.
5.Usecabletiestosecurethewireharnessaway
frommovingpartsorpinchpoints.
6.Installtheslope-sensordecaladjacenttothe
machine-stabilitydecalonthestorage-podlid
(Figure2).
g308336
Figure2
1.Machine-stabilitydecal2.Slope-sensordecal
3

3
InstallingtheFuse
Partsneededforthisprocedure:
1Fuse(2A)
Procedure
1.Openthelidontheleftpod.
2.Removethe3knobsinsidethestoragepod
(Figure3).
g338478
Figure3
1.Knobs2.Frontknob
3.Removethestoragepodandlocatethefuse
block.
4.Removethefuse-blockcoverandinstallthe
fuseinthelocationshowninFigure4.
g338477
Figure4
1.Installthefuseinthis
location
2.Fuseblock
5.Installthefuse-blockcoverandinstallthe
storagepodwiththe3knobs.
4
CalibratingtheSensor
NoPartsRequired
Procedure
Note:Whenyourstturntheignitionkeytoon,the
InfoCentershowsadvisoryB2710,CalibrateSlope
Sensor.
1.Whileonaatsurface,removetheplugfrom
thecalibrationconnectors(Figure5).
2.Plugthecalibrationconnectorstogetheras
showninFigure5.
4

g350905
Figure5
1.Calibrationconnectors2.Plug
3.TurntheignitionkeytotheONposition,butdo
notstarttheengine.
4.TheInfoCentershowsMessage600,Slope
SensorCalibrating.
Note:TheLEDlightatthetopofthedisplay
screenblinksasthesensorcalibrates.
g317524
Figure6
1.LEDlight
5.WhentheInfoCentershowsMessage601,
SlopeSensorCalibrated,Cyclekeyswitch,and
thelightnolongerblinks,turntheignitionkeyto
theOFFposition.
6.Disconnectthecalibrationconnectorsandinstall
theplugontotheconnectors.
g315597
Figure7
1.Calibrationconnectors2.Plug
7.Installtheplasticcover.
8.Lowertheseatplatformandensureitislatched.
5

Operation
UsingtheSlopeSensor
Thelightandalarmindicatestheseverityoftheslope:
•Redlight—normaloperatingconditions
•Slow,ashingredlightandAdvisoryB2713
displayingonthescreen—moderateslope
g317557
Figure8
AdvisoryB2713
•Fast,ashingredlight,audiblealarm,and
AdvisoryB2714displayingonthescreen—steep
slope;proceedtoamoreshallowslope.
g317558
Figure9
AdvisoryB2714
WARNING
Slopesareamajorfactorrelatedto
loss-of-controlandtip-overaccidents,which
canresultinsevereinjuryordeath.
Useextremecautionwhenoperatingthe
machineonaslope.
6

Notes: