Toro 136-1830 User manual

FormNo.3415-648RevA
UniversalSunshadeMountKit
SerialNumber400000000andAfterGroundsmaster®4500or4700
SeriesTractionUnit
ModelNo.136-1830
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
LeftROPS-mountingbracket1
RightROPS-mountingbracket1
U-bolt(3-1/2x5inches)4
U-bolt(4-1/2x3inches)4
Bolt(3/4x4inches)2
Locknut(3/4inch)2
Washer4
Installthemountingbracket.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3415-648*A

InstallingtheMountingBracket
1.Parkthemachineonalevelsurface,engagetheparkingbrake,shutofftheengine,andremovethekey.
2.Usethe8angenuts(3/8inch)fromthesunshadekitandthe4U-bolts(3-1/2x5inches)toloosely
installthebracebracketstotherollbar(Figure1).
g213729
Figure1
1.LeftROPS-mountingbracket6.Bracebracket—fromthesunshadekit
2.Flangenut(3/8inch)—fromthesunshadekit7.Locknut(3/4inch)
3.U-bolt(3-1/2x5inches)8.Washers
4.RightROPS-mountingbracket9.Bolt(3/4x4inches)
5.U-bolt(4-1/2x3inches)
3.Usethe8angenuts(3/8inch)fromthesunshadekitandthe4U-bolts(4-1/2x3inches)tolooselyinstall
theROPS-mountingbracketstotherollbar(Figure1).
4.Usethe2bolts,nuts,and4washersincludedtosecuretherollbarinthecorrectposition(Figure1).
5.Followtheprocedureintheinstallationinstructionfromthesunshadekittocompletethebracket
installation.
2