Toshiba SMMS-e User manual

Carrier Confidential and Proprietary Information– Not for Further Distribution
Carrier Confidential and Proprietary Information– Not for Further Distribution
Quick Reference Guide
SMMS-e / SHRM-e
1
TC-QRG-01

DISCLAIMER
2
Carrier Confidential and Proprietary Information– Not for Further Distribution
This Quick Reference is meant to be assist with
troubleshooting and is not a substitute for Toshiba
Carrier Engineering Manuals, Training Documents, white
papers or industry best practices.
Always follow prescribed safety practices and local codes
when installing or servicing Toshiba Carrier VRF
equipment.
For further guidance, contact your regional or national
Technical Support Manager.
Please Note:

TABLE OF CONTENTS
DN Codes
Error Codes
Service Functions
Board Replacement
Compressor Backup
Rotary Switches
Dip Switches
Thermistor Locations
Monitor Function Codes
3
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN CODES
4
Carrier Confidential and Proprietary Information– Not for Further Distribution

5
How To Access The
RBC-AMS54E-UL
And Set The Proper DN Codes
Push the button to display the
menu screen.
Push and hold the button and
the button at the same time to
display the “Field Setting Menu”.
•Push and hold the buttons for 4 more
seconds.
Push the button and return.
1
2
3
DN CODE SELECTION
Carrier Confidential and Proprietary Information– Not for Further Distribution

Carry out the setting operation while the indoor unit is stopped.
(Turn off the air conditioning unit before starting the setting operation.)
DN CODE SELECTION
6
Push the button to select
“7. DN setting” on the “Field setting menu”
screen, then push the
button.
•The fan and louver of the indoor unit operate.
When the group control is used, the fan and
louver of the selected indoor unit operate.
•Move the cursor to select “Code(DN)” with the
button, then set
“Code(DN)” with the
button.
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN CODE SELECTION
7
Move the cursor to select “Data” with the
button, then set “Data”
with the button.
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN CODE SELECTION
8
Push the button to
finish the setting operation. appears
on the screen for a while, then the screen returns
to the “Field setting menu” screen.
•Pushing the button
displays the unit selection screen when the
group control is used. Push button
on the unit selection screen to finish the setting
operation. appears on the screen
for a while, then the screen returns to the
“Field setting menu” screen.
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN Item Description At Shipment
01 Filter Display Delay Timer
0000: None 0001: 150H
According to Type
0002:2500H 0003: 5000H
0004:10000H
02 Dirty Filter State 0000: Standard 0000: Standard
0001:High Degree of Dirt
03
Central Control Address
(Shown as Group # on
Central Control)
0000: No.1 Unit to 0064: No.64 Unit 0099: Unfixed
0099: Unfixed
04 Specific Indoor Unit
Priority 0000:No Priority 0001: Priority
0002:+2*C (3.6*F)
( Floor Type 0000: 0*C )
05 Fan Control Heating 0001: Default 0009: Fan Off Thermo Off 0001:
* Must have wired remote Change DN-32 to 0001 before use of DN-05
06 Heating SuctionTemp Shift
0000: No Shift 0001: +1*C (+1.8*F)
0002: +2*C (3.6*F)0002: + 2*C (+3.6F) to 0010: +10*C (+18*F)
( Up to +6 Recommended)
OC Preparing Indication
Selection 0000: Preparing indicated 0001: No Indication 0000: Preparing indicated
0D Existence of AUTO Mode
0000: Provided
0001: Not Provided
0001: Not Provided (Automatic selection from connected outdoor unit)
0E FS Box 0000: Only 1 indoor unit on FS 0001: More than 1 indoor unit 0000: Standard
0F Cooling Only 0000: Heat Pump 0000: Heat Pump
0001: Cooling Only (No Display of (AUTO) (HEAT) )
10 Unit Type
0001: 4-Way Air Discharge Cassette 0004: Standard Ducted
Depending on Model
0005: Slim Duct 0006: High Static Ducted
0007: Under Ceiling 0008: High Wall
0014: Compact 4 Way
11 Indoor Unit Capacity 0000: Unfixed 0001 to 0034 According to Capacity
See Page 50 SHRM Quick Reference
12 Line Address 0000: No.1 Unit to 0030: No. 30 Unit 0099: Unfixed
13 Indoor Unit Address 0001: No.1 Unit to 0064: No.64 Unit 0099: Unfixed
14 Group Address 0000: Individual 0001: Header in Group 0099: Unfixed
0002: Follower in Group
19
Louver Type
(Air direction adjustment)
0000: No louver 0001: Swing only
According to Type
0002: (1-Way Air discharge Cassette type, Under Ceiling type)
0003: (2-Way Air discharge Cassette type)
0004: (4-Way Air discharge Cassette type)
1E
Temp Range C/H 0000: 0 degree to 0010: 10 degree 0003: 3 Degree
(Dead Band Heat
Cool/Cool Heat) (Cool / Heat are reversed with +/- (data value) / 2 against the set temperature)
Auto Switch Control Point ( Ts +/- 1.5 )
DN CODES
9
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN Item Description At Shipment
2A
Selection of
option/error input
(CN70)
0000: Filter Input 0001: Alarm Input (Air washer, etc.) 0002: None
0002: None
2b Thermo Output 0000: Indoor thermostat on 0000: Thermo on
SW (T10 3 ) 0001: ON receiving output of outdoor compressor
2E HA Terminal (CN61)
select
0000: Usual 0001: Leaving -ON prevention control 0000: Usual (HA terminal)
0002: Fire alarm input
31 Venting fan control 0000: Unavailable 0001: Available 0000: Unavailable
32 TA sensor location 0000: Body TA sensor 0001: Remote controller sensor 0000: Body TA sensor
33 Temperature unit select 0000: *C 0001: *F(at factory shipment) 0001: *F
36 Room temp on display 0000: set point 0001: shows room temp 0
40 Humidifier Control Drain pump control 0003: Humidifier on Drain Off 0003:
42
Self Clean Operation
Time
(4 way Cassette Only)
0000: None 0000: .5h to .012: 0h
0002: 1 hour
Set when compressor-ON time is 10 to 60 minutes
When ON time is 60 minutes or more,
the double of this operation time setting is set.
45
Selection of louver
horizontal discharge
position
(4-Way Air Discharge
Type Only)
0000: Smudging less setting
0000: Smudging-less
setting
0002: Cold draft preventing setting
C2 Current Demand X% to
outdoor unit 0050: 50% 0100: 100% 0075: 75%
CC
Setting of self-clean
operation forced stop
(4-Way cassette type
only)
0000: No
0000: None
Clean operation is performed in case of stop by HA input
HA operation output OFF during clean operation in case of stop by remote controller
0001: YES
Clean operation is not performed in case of stop bt HA input
HA operation output ON during clean operation in case of stop by remote controller
CD
Clean operation stop
function when [ON/OFF]
operation is prohibited.
(4-Way cassette type
only)
The air conditioner stops (including fire alarm such as remote monitor system) while
setup of [ON/OFF] operation prohibited (Central 1,2) is performed from central
controller side.
0000: Valid
0000: Valid (clean operation)
0001: Invalid (no clean operation)
CE Domestic/Overseas 0000: Domestic 0001: Overseas 0000:
DN CODES
10
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN Item Description At Shipment
DB Diff T Secondary Heat
Setting Cut in - Cut out differential of secondary heat
0000: 0*F 0001: to 0010 0001:=1*F 0010:=9*F 0005&6=5*F
DC Delta T Secondary Heat
Setting enables secondary heat and disables cooling signal CN60
0000: None
0000: None 0001: to 0010 0001:=1*F 0010:=9*F 0005&6=5*F
D1 Frost prevention/Objective
Heating 0000: Impossible 0001: Valid 0000: None
D3
Revolution frequency of self
clean operation 0000: Invalid 0001: Valid
0001: Valid
( 210 rpm / operation)
( 4-Way cassette Type Only)
D4
Display / No display of [Dry
Operation] during self clean
operation 0000: Display 0001: No Display 0000: Display
(4-Way Air Discharge Type
Only)
EO For North America 0000: 0001: North America
72/9B Fan Control in Defrost
DN72 DN9B Fan Operation Defrost
0
1 0 Stop
0 1 RC Setting
0 2 Hot Start Control invalid
F0 Swing Mode 0001: Standard 0002: Dual Swing 0001: Standard
0003: Cycle Swing 0000: No Synchronization
F1
Fixed Louver position (Louver
No.1)
0000: Release 0001: Horizontal position
0000: Not Fixed
0005: Downward discharge
position
F2 Fixed Louver position (Louver
No.2)
0000: Release 0001: Horizontal position
0000: Not Fixed
0005: Downward discharge
position
F3
Fixed Louver position (Louver
No. 3)
0000: Release 0001: Horizontal position
0000: Not Fixed
0005: Downward discharge position
F4 Fixed Louver position (Louver
No. 4)
0000: Release 0001: Horizontal position
0000: Not Fixed
0005: Downward discharge position
7A Temperature Increment 0000: 2 Degree F 0001: 1 Degree F 0000: 2 Degree F
1F Max setting temp Cooling
(remote)
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F) 29 Celsius (84.2F)
20 Min setting temp Cooling
(remote)
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F) 18 Celsius (64.4F)
21 Max setting temp Heating
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F)
29 Celsius (84.2F)
DN CODES
11
Carrier Confidential and Proprietary Information– Not for Further Distribution

DN Item Description At Shipment
22 Min setting temp Heating
(remote)
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F) 18 Celsius (64.4F)
25 Max setting temp Auto
(remote)
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F) 29 Celsius (84.2F)
26 Min setting temp Auto
(remote)
Setting range in Celsius Only -15 to 60 (5.0F to 140.0F) 18 Celsius (64.4F)
28 Auto Restart 0000: None 0001: Restart 0000: None
5D High Ceiling Static Adjustment
Slim, high static ducted 0001
: Standard
(slim, high static ducted)
0000
: Standard
(4-
Way cassette, medium static)
0000
: Standard (Ceiling)
0000: Lo 0001: Standard Medium 0003: Hi Hi 0006: Lo Lo
4-Way, High Wall 0000: Lo 0001:Medium 0003: Hi
0000: Lo 0001:Medium 0003: Hi
60 Timer Set
(Wired Remote) 0000: Available 0001: Unavailable 0000: Available
69 Louver Position Selection
Cooling 0000: Normal 0001: Down Allowed 0000: Normal
86
Correction of feeling of strong
heating 0000: Not provided 0001: Provided 0000: Not Provided
92 Outside interlock release
condition 0000: Operation Stop 0001: Release communication signal receive 0000: Operation Stop
9A Fan Control Cooling 0000: Standard 0001: L to LL 0000: Default
9B Hot Start Function 0000: Default
77 Dual Set point 0000: no dual set point 0002: Dual Set point enabled
FE Group Control Check service manual
C5 Flip Function
DN CODES
12
Carrier Confidential and Proprietary Information– Not for Further Distribution

Quick Reference Template
13
ERROR CODES

Quick Reference Template
ERROR CODES
14
Check Codes Displayed on Remote Controller and SHRM-e Outdoor Unit
(7-Segment Display on I/F Board) and Locations to Be Checked
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
15
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
16
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
17
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
18
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
19
Carrier Confidential and Proprietary Information– Not for Further Distribution

ERROR CODES
20
Carrier Confidential and Proprietary Information– Not for Further Distribution