Toshiba 1600EP Series User manual

TOSHIBA
BATTERY CABINET SYSTEM
SINGLE PHASE – 3.6/6.0 kVA
1600EP SERIES
BATTERY CABINET
OPERATION MANUAL
March 2008
Part# 55339-001

TOSHIBA
1600EP Series Battery Cabinet Operation Manual

TOSHIBA
1600EP SERIES
SINGLE PHASE- 3.6/6.0 kVA
BATTERY CABINET SYSTEM
OPERATION MANUAL
TOSHIBA INTERNATIONAL CORPORATION
INDUSTRIAL DIVISION
13131 West Little York Rd.
Houston, Texas 77041
1600EP Series Battery Cabinet Operation Manual

TOSHIBA
1600EP Series Battery Cabinet Operation Manual
IMPORTANT NOTICE
The instructions contained in this manual are not intended to cover all of the details
or variations in equipment, or to provide for every possible contingency to be met in
connection with installation, operation, or maintenance. Should further information be
desired or particular problems arise which are not covered sufficiently for the
purchaser's purposes, the matter should be referred to the local Toshiba sales office.
The contents of this instruction manual shall not become a part of or modify any
prior or existing agreement, commitment, or relationship. The sales contract contains
the entire obligation of Toshiba International Corporation's UPS Division. The warranty
contained in the contract between the parties is the sole warranty of Toshiba
International Corporation's UPS Division and any statements contained herein do not
create new warranties or modify the existing warranty.
Any electrical or mechanical modifications to this equipment, without prior
written consent of Toshiba International Corporation, will void all warranties and
may void UL/CUL listing. Unauthorized modifications also can result in personal
injury, death, or destruction of the equipment.
UNINTERUPTIBLE POWER SYSTEM -
BATTERY CABINET SYSTEM
If additional information or technical assistance is required call Toshiba’s Customer Support
Center toll free at 1-877-867-8773 or write to: Toshiba International Corporation, 13131 W. Little
York Rd., Houston, TX 77041-9990.
Please complete the following information for your records and keep this manual with the
equipment:
Model Number:
Serial Number:
Date of Installation:
Inspected By:

TOSHIBA
1600EP Series Battery Cabinet Operation Manual i
TABLE OF CONTENTS
TABLE OF CONTENTS..............................................................................................i
GENERAL SAFETY INSTRUCTIONS.......................................................................1
IMPORTANT SAFETY INSTRUCTIONS ...................................................................2
IMPORTANT BATTERY SAFETY INSTRUCTIONS..................................................3
INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ...........................4
1.0 Inspection/Storage/Disposal..........................................................................5
1.1 Inspection of the New Battery System...................................................................................... 5
1.2 Storage of Battery Equipment................................................................................................... 5
1.3 Disposal .................................................................................................................................... 5
2.0 Precautions......................................................................................................6
2.1 Installation Precautions............................................................................................................. 6
2.2 Prestart Precautions.................................................................................................................. 6
2.3 Operating Precautions .............................................................................................................. 6
3.0 UPS Power Connections ................................................................................7
3.1 UPS Input Voltage..................................................................................................................... 7
3.2 Connecting Multiple Battery Cabinets....................................................................................... 7
3.3 Battery Cabinet Cabling............................................................................................................ 7
4.0 Connection Instructions and Diagrams 3.6/6.0 kVA.....................................8
4.1 Battery Connections.................................................................................................................. 8
4.2 3.6/6.0 kVA Illustration.............................................................................................................. 8
4.3 Connection Procedure .............................................................................................................. 8
4.4 Charger Connection.................................................................................................................. 8
5.0 Preventive and Scheduled Maintenance / Part Replacement......................9
5.1 Preventive Maintenance............................................................................................................ 9
5.2 Parts Replacement.................................................................................................................... 9
5.3 Power Cables.......................................................................................................................... 10
6.0 Emergency Power Off (EPO)........................................................................10
6.1 Shunt Trip................................................................................................................................ 10
6.2 EPO Connection Diagram....................................................................................................... 10
7.0 External Layouts / Dimensions / Shipping Weights ...................................11
7.1 External Layouts ..................................................................................................................... 11
7.2 Dimensions ............................................................................................................................. 11
7.3 Shipping Weights.................................................................................................................... 11
8.0 1600EP System Backup Runtime.................................................................12

TOSHIBA
ii 1600EP Series Battery Cabinet Operation Manual

TOSHIBA
GENERAL SAFETY INSTRUCTIONS
Warnings in this manual appear in any of four ways:
1) Danger- The danger symbol is a lightning bolt mark enclosed in a triangle which
precedes the 3/16-inch high letters spelling the word “DANGER”. The danger symbol is
used to indicate imminently hazardous situations, locations, and conditions which, if not
avoided, WILL result in death, serious injury, and/or severe property damage.
DANGER
2) Warning- The warning symbol is an exclamation mark in a triangle which precedes the
3/16-inch high letters spelling the word “WARNING”. The warning symbol is used to
indicate potentially hazardous situations and conditions which, if not avoided COULD
result in serious injury or death. Severe property damage COULD also occur.
WARNING
3) Caution- The caution symbol is an exclamation mark enclosed in a triangle which
precedes the 3/16-inch high letters spelling the word “CAUTION”. The caution symbol is
used to indicate potentially hazardous situations and conditions which, if not avoided may
result in injury. Equipment damage may also occur.
CAUTION
4) Attention warnings- The attention warning symbol is an exclamation mark enclosed in a
triangle which precedes the 3/16-inch high letters spelling the word “ATTENTION”. The
Attention warning symbol is used to indicate situations and conditions that can cause
operator injury and/or equipment damage.
1600EP Series Battery Cabinet Operation Manual 1
ATTENTION
Other warning symbols may appear along with the Danger and Caution symbol and are used to
specify special hazards. These warnings describe particular areas where special care and/or
procedures are required in order to prevent serious injury and possible death:
1) Electrical warnings- The electrical warning symbol is a lighting bolt mark enclosed in a
triangle. The Electrical warning symbol is used to indicate high voltage locations and
conditions may cause serious injury or death if the proper precautions are not observed:
2) Explosion warnings- The explosion warning symbol is an explosion mark enclosed in a
triangle. The Explosion warning symbol is used to indicate locations and conditions
where molten, exploding parts may cause serious injury or death if the proper
precautions are not observed:

TOSHIBA
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
maintenance of the Battery System model UE31-BC-0650.
The maximum ambient temperature in which a Battery System should be operated is 104 °F (40 °C).
The nominal battery voltage for the battery cabinet is as follows:
Model Voltage
UE31-BC-0650 216 VDC
Battery Pack Information:
Battery Packs Designed for battery acid leakage containment with (6) batteries per pack.
Battery Pack Size
HxWxD (max) 5 in. (127 mm) x 7.3 in. (185 mm) x 18.2 in. (462 mm)
Battery Pack Quantity 6
Battery Manufacturer Enersys
Battery Type NPX-35
Toshiba Part Number for
Battery Pack 51896
CAUTION Misuse of this equipment could result in human injury and equipment
damage. In no event will Toshiba Corporation be responsible or liable for
either indirect or consequential damage or injury that may result from the use of this equipment.
CAUTION
Do not dispose of the batteries in a fire. The batteries may explode.
CAUTION Do not open or mutilate the batteries. Released electrolyte is harmful to
the eyes and skin and could also be toxic.
WARNING This unit contains sealed lead acid batteries. Lack of preventative
maintenance could result in batteries exploding and emitting gasses
and/or flame. An authorized, trained technician must perform annual preventative maintenance.
WARNING Failure to replace a battery before it becomes exhausted may cause the
case to crack,
p
ossibl
y
releasin
g
electrol
y
tes from inside the batter
y
, and
resulting in secondary faults such as odor, smoke, and fire.
WARNING Installation and servicing of batteries should performed by personnel
knowledgeable of batteries and the required precautions. Keep
unauthorized
p
ersonnel awa
y
from the batteries.
2 1600EP Series Battery Cabinet Operation Manual

TOSHIBA
IMPORTANT BATTERY SAFETY INSTRUCTIONS
WARNING Proper maintenance to the battery system of this unit must be done by a
qualified service technician. This is essential to the safety and reliability
y
our UPS s
y
stem. Refer to service manual.
A battery can present a risk of electrical shock and high short
DANGER circuit current. The following precautions should be observed
when working with batteries.
1) Verify that the UPS is off and that the power cord is disconnected from the power source.
2) Remove watches, rings or other metal objects.
3) Use tools with insulated handles to prevent inadvertent shorts.
4) Wear rubber gloves and boots.
5) Do not lay tools or metal parts on top of batteries.
6) Determine if the battery is inadvertently grounded. If inadvertently grounded, remove
source of ground. Contact with any part of a grounded battery can result in
electrical shock. The likelihood of such shock will be reduced if such grounds are
removed during installation and maintenance.
7) Verify circuit polarities prior to making connections.
8) Disconnect charging source and load prior to connecting or disconnecting terminals.
9) VRLA batteries contain an explosive mixture of hydrogen gas. Do not smoke, cause a flame
or spark in the immediate area of the batteries. This includes static electricity from the body.
10 Do not attempt to open the batteries in order to add water or sample the specific gravity of the
electrolyte. The batteries are valve regulated lead acid type and such servicing is not possible
without damaging the battery.
11 Use proper lifting means when moving batteries and wear all appropriate safety clothing and
equipment.
12 Do not dispose of lead acid batteries except through channels in accordance with local, state
and federal regulations.
1600EP Series Battery Cabinet Operation Manual 3

TOSHIBA
INSTRUCTIONS IMPORTANTES CONCERNANT
LA SÉCURITÉ
CONSERVER CES INSTRUCTIONS Cette notice contient des
instructions importantes
concernant la sécurté
ATTENTION Un battery puet présenter un risque de choc électrique, de brûlure
par transfert d’ énergie.
ATTENTION Por le replacement, utiliser le même nombre de batteries du modéle
suivant.
Model Capacity Manufacturer Type Quantity
UE31-BC-0650 ENERSYS NPX-35 36
ATTENTION L’élimination des batteries est règlementèe. Consultar les codes
locaux à cet effet.
4 1600EP Series Battery Cabinet Operation Manual

TOSHIBA
1600EP Series Battery Cabinet Operation Manual 5
1.0 Inspection/Storage/Disposal
1.1 Inspection of the New Battery System
Upon receipt of the Battery System, a careful inspection for shipping damage should
be made.
1) Check the unit for loose, broken, bent or otherwise damaged parts. If damage
has occurred during shipment, keep all original crating and packing materials for
return to the shipping agent. The equipment warranty will not apply to units,
which are damaged during shipment.
2) Check to see that the rated capacity and the model number specified on the
nameplate conform to the order specifications.
1.2 Storage of Battery Equipment
If the Battery System is to be subjected to long or short term storage the following
guidelines should be used.
Avoid:
1) Storage in sites subject to extreme changes in temperature or high humidity.
2) Storage in sites subject to exposure of high levels of dust or metal particles
3) Storage on inclined floor surfaces or in sites subject to excessive vibration.
Before storing:
1) Charge the system's batteries.
2) Place the Battery System’s input switch (MCCB-C) in the OFF position.
Storing:
1) Store within a temperature range of -4 to 104 °F (-20 to 40 °C).
2) For best results, store the Battery System in the original shipping container and
place on a wood or metal pallet.
3) The optimum storage temperature is 70 °F (21 °C). Higher ambient temperatures
cause UPS batteries to need recharging more frequently.
4) If stored in an ambient temperature under 68 °F (20 °C); recharge the batteries
every 9 months.
5) If stored in an ambient temperature of 68 to 86 °F (20 to 30 °C); recharge the
batteries every 6 months.
6) If stored in an ambient temperature of 86 to 104 °F (30 to 40 °C); recharge the
batteries every 3 months.
1.3 Disposal
Please contact your state environmental agency for details on disposal of electrical
components and packaging in your particular area.
It is illegal to dump lead-acid batteries in landfills or dispose of improperly.
Please help our Earth by contacting the environmental protection agencies in your
area, the battery manufacturer, or call Toshiba toll-free at [phone] for more
information about recycling.

TOSHIBA
2.0 Precautions
2.1 Installation Precautions
1) Install the unit in a well ventilated location; allow at least 4 inches (10 cm) on
all sides for air ventilation and maintenance.
2) Install the unit in a stable, level, and upright position, which is free of vibration.
3) Install the unit where the ambient temperature is within the correct operating
range.
4) Do not install the Battery System in a location that is subject to high humidity.
5) Do not install the unit at sites that are exposed to direct sunlight.
6) Do not install Battery System in areas which are subject to high levels of
contamination by airborne dust, metal particles, or flammable gases.
7) Avoid installation near sources of electrical noise. Always make sure that the
unit ground is intact to prevent electrical shock and to help reduce electrical
noise.
8) Do not install where water or any foreign objects/substances may get inside
the Battery System.
2.2 Prestart Precautions
1) Before connecting the Battery System to the UPS verify that the two are compatible
by comparing them to the following chart.
UPS Model Number Battery Cabinet Model Number Battery Voltage
UE3G2L036C61T
UE3G2L060C61T UE31-BC-0650 216VDC
WARNING DO NOT attempt to connect if the Model numbers do
not match the above chart. This will result in damage
to the UPS, the Battery System, or both. Call your
Toshiba representative if you should have any
questions.
2) Before connecting the Battery System to the UPS; switch the ON/OFF switch
MCCB2, located on the rear panel of the battery system to the OFF position. (See
Sections 4 & 5)
2.3 Operating Precautions
1) The UPS should not be powered up until the entire operation manual has been
reviewed.
6 1600EP Series Battery Cabinet Operation Manual

TOSHIBA
3.0 UPS Power Connections
The following illustration shows the wiring connections from the power distribution
panel (not part of the UPS) to the UPS, and from the UPS to the battery cabinet. This
connection diagram is to be used with the UE31-BC-0650 Battery Unit.
1600EP Series Battery Cabinet Operation Manual 7
3.1 UPS Input Voltage
If the UPS AC input power is 208 V rated connect a jumper wire between terminals 11
and 12 on the UPS terminal block. DO NOT jumper terminal 13 to 11 or 12. The UPS
ships from the factory with the jumper in the 208 V position.
If the UPS AC input power is 240 V rated connect a jumper wire between terminals 12
and 13 on the UPS terminal block. DO NOT jumper terminal 11 to 12 or 13.
3.2 Connecting Multiple Battery Cabinets
Up to two battery cabinets may be connected in parallel to the UPS. To connect two
battery cabinets to the UPS,
1. Connect the first battery cabinet to the UPS as shown in the illustration above.
2. Connect cabinet 2 CN12A to cabinet 1 CN22,
3. Connect cabinet 2 CN13A to cabinet 1 CN23,
4. Connect cabinet 2 CN14A to cabinet 1 CN24.
3.3 Battery Cabinet Cabling
The battery cabinets ship with a set of six-foot long cables. Contact Toshiba Customer
Support at 1-877-867-8773 if longer cables are required for your application, or if
additional cables or connectors are required.

TOSHIBA
4.0 Connection Instructions and Diagrams 3.6/6.0 kVA
4.1 Battery Connections
The following illustration shows the wiring connections between the UPS and the
battery cabinet.
8 1600EP Series Battery Cabinet Operation Manual
DANGER Contacts are not rated with interrupting capacity.
Ensure the MCCB switch on the rear panel of the Battery Unit is set to the
OFF position before connecting the UPS to the battery cabinet.
4.2 3.6/6.0 kVA Illustration
The following diagram shows the rear view of the UPS and battery cabinet.
NOTE: Use only compatible cabinets! See page 6.
4.3 Connection Procedure
1) Ensure all power is locked and tagged out.
2) Remove the battery connector cover mounted on the UPS back panel next to the
exhaust fan.
3) Plug the DC Connectors of the battery cabinet into the DC Connector socket on the
UPS unit (see section 3.0 UPS Power Connections).
4.4 Charger Connection
Battery cabinet model UE31-BC-0650 requires a 216 Vac connection between the UPS
and battery cabinet for battery charging. This connection is made from CN14A of the
battery cabinet to CN14 of the UPS (and CN14A of battery cabinet 2 to CN24 of battery
cabinet 1 if paralleling two cabinets). NOTE: Without this connection the battery
cabinet will not be able to charge its batteries.
CN22 CN23 CN24
3.6/6 kVA UPS Battery Cabinet
CN12A CN13A
CN14A
CN12
CN13
CN14

TOSHIBA
5.0 Preventive and Scheduled Maintenance / Part Replacement
ed to provide
n requiring a minimum of preventive maintenance.
round the unit, particularly the air inlet vents, clean and free of moisture and dust
e
rforming any maintenance, the technician should become
ith and follow the important safety instructions on pages 1 – 3.
NING Proper maintenance of the battery system of this unit by factory authorized
personnel is essential to the safety and reliability of your battery cabinet
The following list shows intervals for periodic maintenance and replacement of certain
tteries: VRLA batteries are maintenance free with respect to electrolyte
only. The charging voltage, temperature, performance, and connection
d by
ll of the
atteries must be replaced at the same time.
. Visual Checks:
B. cord the system float charging voltage.
C. ord the individual unit’s battery tray voltage.
Sem
A. Repeat the monthly checks.
d high rate (e.g. 100 amp) load test on the
D. connector resistance checks.
Component* Part No.
5.1 Preventive Maintenance
Toshiba's 1600EP Series of UPS battery cabinets have been design
years of trouble-free operatio
The best preventive measure that the battery cabinet user can take is to keep the area
a
accumulations. If the atmosphere of the installation site is very dusty, use a vacuum
cleaner to periodically remove dust accumulations from the air inlet vents. Schedul
authorized service centers to perform internal parts inspections annually.
CAUTION Before pe
familiar w
1600EP Series Battery Cabinet Operation Manual 9
WAR system. Refer to service manual.
ent
5.2 Parts Replacem
UPS parts.
Ba
resistance must be checked periodically. Conditions that require corrective
action must be corrected in order to assure safe reliable power is supplie
the battery cabinet. Charging voltage, storage/operating temperature,
charging cycles, and connection resistance all affect battery life.
The recommended battery replacement interval is 3 to 5 years. A
b
Monthly Maintenance
A1) Leakage
2) Corrosion
Measure and re
Measure and rec
i-Annual maintenance
B. Perform a 10-secon
individual batteries.
C. Re-torque all inter-battery connecting hardware (if applicable).
Perform inter-battery
Function Rating
FU1, FU2 Control Power Fuses 500 V, 5 A 00648
Battery Tray Fuse Internal B Fuse 500 V, 40 Aattery tray 00637
Battery Pack ackReplaceable Battery P - 51896
* Field Service replaceable parts only.

TOSHIBA
5.3 Power Cables
The three battery cabinet connector cables (battery positive, battery negative, and
battery charger) are each equipped with individually keyed Anderson connectors to
prevent cross connecting the battery cabinet and UPS circuitry.
6.0 Emergency Power Off (EPO)
6.1 Shunt Trip
A shunt trip for the DC breaker on the battery cabinet is provided. This device is
operated with an applied voltage of 120 Vac (supplied from the UPS). When this
voltage is applied, the shunt trip will cause the breaker to switch to the OFF position
disabling the battery cabinet.
6.2 EPO Connection Diagram
The EPO is achieved by completing the circuit between 14 &15 on terminal block TB1
of the UPS. By completing the circuit, the shunt trip will cause the breaker on the
battery cabinet as well as the one on the UPS to switch to the OFF position disabling
both the battery cabinet and the UPS.
Terminal Block TB1 on the 1600EP UPS
10 1600EP Series Battery Cabinet Operation Manual

TOSHIBA
7.0 External Layouts / Dimensions / Shipping Weights
7.1 External Layouts
1600EP Series Battery Cabinet Operation Manual 11
7.2 Dimensions
Model A B C D E
UE31-BC-0650 27.12 in.
(688.8 mm) 12.90 in. (327.7 mm) 25.70 in. (652.8 mm) 24.70 in. (627.4 mm) 2.50 in. (63.5 mm)
7.3 Shipping Weights
Model Pounds Kilograms
UE31-BC-0650 380 lbs. 172.4 kg

TOSHIBA
12 1600EP Series Battery Cabinet Operation Manual
8.0 1600EP System Backup Runtime
The following runtime table gives the approximate combined backup runtime in
minutes at different load levels for 1600EP UPS models equipped with one and two
battery cabinets.
NOTE: These values are approximate and are dependent on many variables
including operating environment, age of the batteries, battery temperature, and
discharge history.
The load levels are given as a percent of rated load with a 0.7 power factor.
Table 1: Estimated Runtime of UPS with Battery Cabinet at Various Loads
Rated Load 100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
1600EP 3.6 kVA 60 65 70 80 90 105 120 150 180 300
UPS plus One
Battery Cabinet
1600EP 6 kVA 35 40 45 50 60 70 85 105 135 180
1600EP 3.6 kVA 90 95 110 120 135 150 180 240 300 <300*
UPS plus Two
Battery Cabinets
1600EP 6 kVA 60 65 70 80 90 105 120 150 180 300
* Estimated Runtime Exceeds 300 minutes.

TOSHIBA
1600EP Series Battery Cabinet Operation Manual 13