Totally Wicked Arc pico grande User manual

ELECTRONIC CIGARETTE KIT
USER MANUAL / BEDIENUNGSANLEITUNG
Arc_Pico_Grande_Compliant_Manual.indd 1 22/03/2017 12:42

2
Congratulations on purchasing your
Totally Wicked arc pico grande Electronic Cigarette Kit.
The Totally Wicked arc pico grande is a stylish, highly versatile e-cigarette design
incorporating an intelligent temperature control system, allowing you to finely tune
your device to suit your vaping style. Additionally, upgradeable firmware means
that you will always be up to date. The user is provided with seven modes of
operation; Variable Power (W); Bypass; Smart; Variable Temperature with nickel
coils (Ni); Variable Temperature with titanium coils (Ti); Variable Temperature
with stainless steel coils (SS): and Temperature Coefficient of Resistance (TCR)
mode. Each adjustable mode allows for incremental settings in terms of watts,
temperature and temperature coefficient of resistance. Utilising the popular and
versatile ML/EC atomizer head, the SubAir III Mini Tank is supplied as the perfect
companion to the arc pico grande. The arc pico grande Kit combines all of its
functionality, and capacity for the long life of a 26650 battery, in a sleek, ergonomic
and exceptionally compact package.
Arc_Pico_Grande_Compliant_Manual.indd 2 22/03/2017 12:42

3
Firmware Upgrade: The
firmware can be upgraded
by accessing the relevant
product page on the Totally
Wicked website and clicking
the link identified in the
product description and
following instruction. The
device should be connected
to a computer through
the USB port via a micro
USB cable to complete the
upgrade.
Power Button
Micro USB Port
+/Up Button -/Down Button
Adjustment Buttons
Battery Sleeve
arc pico grande battery Battery Cap
510 Connector
OLED Screen
Arc_Pico_Grande_Compliant_Manual.indd 3 22/03/2017 12:42

4
SubAir lll Mini tank
Atomizer Base ML/EC Head Central Air Tube Glass Top Cap Mouthpiece
Arc_Pico_Grande_Compliant_Manual.indd 4 22/03/2017 12:42

5
Using your arc pico grande kit
Fitting a Battery:
The arc pico grande utilises a 26650
or 18650 battery. To fit the battery,
unscrew the battery cap on the top
of the device and insert the battery,
ensuring the correct polarity. When
using an 18650 battery, the battery
sleeve should be inserted into the
device before the battery is installed.
Note: For maximum power delivery,
ensure that the battery installed is a
good quality lithium ion 26650/18650
capable of at least 25A constant
discharge.
Mouthpiece
Battery
Arc_Pico_Grande_Compliant_Manual.indd 5 22/03/2017 12:42

6
Using your arc pico grande kit
Using your tank for the first time:
Remove the atomizer base from the
tank and drip a few drops of e-liquid
into the atomizer head, this will ensure
optimum operation and longevity of
the atomizer. Refit the atomizer base
before filling the tank.
Arc_Pico_Grande_Compliant_Manual.indd 6 22/03/2017 12:42

7
Filling the Tank:
To fill the tank, turn the top cap
anticlockwise until it is fully unscrewed
from the central air tube. Fill the tank
with e-liquid through one of the filling
slots at the side of the central air
tube. Refit the top cap by turning it
clockwise until it is firmly seated. The
SubAir III Mini Tank can now be fitted
to the arc pico grande by turning
clockwise until firmly seated.
Maximum refill nozzle diameter:
4.0 mm
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 7 22/03/2017 12:42

8
Power On and Off:
The arc pico grande uses a 5-click
on/off function. To switch the device
on quickly press the power button
5 times. The screen will illuminate,
indicating that the device is powered
on. Once the arc pico is powered on,
press the button 5 times to switch the
device off.
Vaping:
Simply press the power button as
you inhale.
Adjusting the Airflow:
To adjust the airflow, twist the airflow
ring clockwise to loosen the draw and
anticlockwise to tighten the draw.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 8 22/03/2017 12:42

9
Charging the Battery:
Charge the arc pico grande via the
USB cable when connected to a
powered USB port or suitable wall
adapter. The indicator on the display
will indicate the battery status.
Batteries may also be charged using a
suitable external charger.
Replacing the Atomizer Head:
To replace the atomizer head, invert
the tank and turn the airflow ring
anticlockwise until the base is fully
unscrewed from the central air tube.
The atomizer head can now be
unscrewed from the atomizer base
by turning it anticlockwise. Screw the
replacement atomizer into the base by
turning it clockwise until firmly seated.
Reassemble the tank and the new
atomizer head is ready for use.
Note: Please drip a few drops of
e-liquid into a new atomizer head
before use.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 9 22/03/2017 12:42

10
Shift between VW/Bypass/Smart/
VT-Ni/VT-Ti/VT-SS/TCR Modes:
When powered on, press the power
button 3 times consecutively; the
active mode will be displayed on the
screen. Use the adjustment buttons
to cycle through the 9 available
selections. Press the power button to
select the mode which is currently
displayed. Alternatively, wait 10
seconds with the mode of choice
displayed on the screen and the
mode will be automatically selected.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 10 22/03/2017 12:42

11
VW Mode and Smart Mode:
When in VW or smart mode, use the
+/Up or -/Down adjustment buttons
to increase or decrease the level of
wattage respectively. The available
wattage range is 1W – 80W in
increments of 1W. Smart mode allows
for wattage settings to be saved to
the device dependant on the atomizer
resistance which is installed, 10
profiles can be saved at one time and
if this is exceeded the first profile will
be deleted
If the wattage is changed for a
particular resistance, this will
automatically be saved to that
resistance profile.
Bypass Mode:
When in bypass mode the direct
voltage of the fitted battery cell will be
supplied to the atomizer.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 11 22/03/2017 12:42

12
VT Mode (Ni/Ti/SS):
When in VT mode, use the +/Up
or –/Down adjustment buttons to
increase or decrease the temperature
respectively. The available
temperature range is 100-315°C or
200-600°F. To adjust the wattage
level whilst in VT mode, press the
power button 4 times consecutively to
activate the wattage setting, use the
+/Up or -/Down adjustment buttons to
adjust the wattage level.
To lock/unlock the atomizer resistance,
hold the power button and +/Up
button simultaneously for 2 seconds.
Note: Only lock the atomizer when the
coil is at room temperature.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 12 22/03/2017 12:42

13
Using your arc pico grande kit
TCR Mode (M1/M2/M3):
To configure TCR modes M1, M2 and
M3, when the device is powered off,
hold the power button and the +/Up
button simultaneously until you enter
the TCR configuration menu. Use
the +/Up or –/Down buttons to cycle
through M1, M2 and M3 modes and
single press the power button to select
the mode that you wish to configure.
Use the +/Up or –/Down buttons to
increase or decrease the TCR value
depending on your choice of coil
material.
Hold the power button and the +/Up
button simultaneously to save any
changes and leave the configuration
menu.
Arc_Pico_Grande_Compliant_Manual.indd 13 22/03/2017 12:42

14
Using your arc pico grande kit
TCR Value Range:
Material TCR Value Range
Nickel 600-700
NiFe 300-400
Titanium 300-400
SS (303, 304, 316, 317) 80-200
Note: The TCR value displayed is 105(100,000) times greater than the actual TCR
value and is for arc pico grande usage only.
Arc_Pico_Grande_Compliant_Manual.indd 14 22/03/2017 12:42

15
Stealth Mode:
When powered on, simultaneously
hold the power button and the
–/Down adjustment button to
activate stealth mode. Repeat the
process to deactivate stealth mode.
Key Lock Mode:
When powered on, simultaneously
hold the two adjustment buttons for
3 seconds to activate key lock mode.
Repeat the process to deactivate the
key lock mode.
Display Modes:
When powered off, hold both
adjustment buttons to turn the
display through 180°. Two display
states are available.
Replacing the Battery:
To replace the 26650/18650 battery,
simply remove the battery cap on
the top of the device and remove
the battery from its compartment.
Insert a new 26650/18650 battery
and replace the cap, ensuring the
correct polarity.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 15 22/03/2017 12:42

16
Short Circuit & No Atomizer
Protection:
If a short circuit occurs, ‘Atomizer
Short’ will be displayed on the
screen and the device will not fire.
If no atomizer is detected, ‘No
Atomizer’ will be displayed on the
screen. Replace the atomizer head
to continue.
Atomizer Low Alert:
When the resistance of a coil is
detected to be lower than 0.1ohm
in VW/Bypass mode, or lower than
0.05ohm in VT mode, the screen will
display ‘Atomizer Low’.
Atomizer Protection:
If the power button is pressed
for longer than 10 seconds, the
output will automatically cease
and the message ‘Over 10s’ will be
displayed.
Low Voltage Protection:
When the battery voltage is below
3.1V, ‘Battery Low’, and then ‘Lock’
will be displayed on the screen.
Recharge the battery to unlock the
device and begin vaping again.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 16 22/03/2017 12:42

17
Low Battery Alert:
When the battery reaches lower than
10% capacity, the power symbol on
the screen will flash continuously.
Weak Battery alert:
If the voltage of the battery drops
below 2.9V whilst vaping, the screen
will display ‘Weak Battery’ and
the output power will be reduced
accordingly.
Temperature Protection:
In VT mode, if the actual
temperature of the coil reaches
the set temperature, ‘temperature
protection’ will be displayed on the
screen. The device can continue to
be used normally.
Temperature Alert:
If the temperature of the device
exceeds the maximum safe
operating temperature, ‘Device
Too Hot’ will be displayed on the
screen and the output will shut off
automatically. Allow to cool before
using.
Using your arc pico grande kit
Arc_Pico_Grande_Compliant_Manual.indd 17 22/03/2017 12:42

18
1 x arc pico grande
1 x SubAir III Mini Tank (2ml)
1 x EC/ML atomizer head (0.3ohm Fitted)
1 x EC/ML atomizer head (0.5ohm)
1 x EC/ML atomizer head (0.25ohm)
4 x Seal Ring
1 x USB Cable
1 x User Manual
Kit Contents
Arc_Pico_Grande_Compliant_Manual.indd 18 22/03/2017 12:42

19
Specications
arc pico grande dimensions: 74mm x 53.5mm x 31.5mm
Wattage Range in VW Mode and VT Mode: 1W – 80W
Temperature Range in VT Mode: 100-315°C / 200-600°F
Tank Connector: 510 Connector
Battery: 26650/18650 lithium ion,
25A minimum constant current rating (not supplied)
Atomizer Resistance Compatibility: VW Mode: 0.1 – 3.5ohm,
VT Mode: 0.05 – 1.5ohm
SubAir III Mini Tank Dimensions: 55.7mm Length x 22mm Dia.
Tank Capacity: 2ml
Atomizer Compatibility: ML/EC
Maximum refill nozzle diameter: 4.0 mm
Arc_Pico_Grande_Compliant_Manual.indd 19 22/03/2017 12:42

20
Additional product information
There are no reported medical side effects with this product. If you believe you
experience a side effect, please contact the manufacturer.
Arc_Pico_Grande_Compliant_Manual.indd 20 22/03/2017 12:42