Toyota GENUINE AUDIO AVENSIS T25 User manual

AUDIO
TOYOTA GENUINE AUDIO
NOTICE EXPLICATIVE DE L’INSTALLATION
Avensis
RHD
FÜR-FOR-POUR **T25*R
Binder Volume 4
Manual Ref.no A4RT25/J-0-0

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 310-02
1. Application Chart ............................................................................................................................................................................ 4
2. System Layout .............................................................................................................................................................................. 5
3. In-dash 6 CD-Changer Installation ................................................................................................................................................. 6
4. Hide-away 6 CD-changer installation.............................................................................................................................................. 15
1. TABLE OF CONTENTS

+ ADD-ON UNIT
(
S
)
Hide Awa
y
CD-Chan
g
er TM0461
(
08601-00911
)
Navi
g
ation S
y
tem TNS200
(
08545-00802
)
(
ONLY PORT FIT
)
1Radio/Cassette/CD (Lo) (only) MOP-unit or -
W53900 (08600-058 1) -
2Radio/Cassette/CD (Hi) (only) MOP-unit or -
W53901 (08600-058 ) -
3Radio/Cassette/CD (Lo) + Hide Away CD-Changer MOP-unit or ( ) Wire (08695-00370)
W53900 (08600-058 1) ( ) Wire (08695-00370)
4Radio/Cassette/CD (Lo) + In-Dash CD-Changer MOP-unit or (1) Wire (08695-00370) + F/K (08695-05801)
W53900 (08600-058 1) (1) Wire (08695-00370) + F/K (08695-05801)
5Radio/Cassette/CD (Lo) + Navigation (TBT) MOP-unit or (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
W53900 (08600-058 1) (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
6Radio/Cassette/CD (Lo) + Hide Away CD-Changer + Navigation (TBT) MOP-unit or ( ) (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
W53900 (08600-058 1) ( ) (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
7Radio/Cassette/CD (Lo) + In-Dash CD-Changer + Navigation (TBT) MOP-Unit or (1) (3) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ4 5-T0330-60)
W53900 (08600-058 1) (1) (3) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ4 5-T0330-60)
8Radio/Cassette/CD (Hi) + Hide Away CD-Changer MOP-unit or ( ) Wire (08695-00370)
W53901 (08600-058 ) ( ) Wire (08695-00370)
9Radio/Cassette/CD (Hi) + In-Dash CD-Changer MOP-Unit or (1) Wire (08695-00370) + F/K (08695-05801)
W53901 (08600-058 ) (1) Wire (08695-00370) + F/K (08695-05801)
10 Radio/Cassette/CD (Hi) + Navigation (TBT) MOP-unit or (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
W53901 (08600-058 ) (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
11 Radio/Cassette/CD (Hi) + Hide Away CD-Changer + Navigation (TBT) MOP-Unit or ( ) (3) Wire (08695-00370) + F/K (PZ4 5-T0330-60)
W53901
(
08600-058
)
(
)
(
3
)
Wire
(
08695-00370
)
+ F/K
(
PZ4 5-T0330-60
)
12 Radio/Cassette/CD (Hi) + In-Dash CD-Changer + Navigation (TBT) MOP-Unit or (1) (3) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ4 5-T0330-60)
W53901 (08600-058 ) (1) (3) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ4 5-T0330-60)
Unique Design Audio
HEAD UNITCOMBINATION REQUIRED ADDITIONAL PARTS
In-Da h CD-Chan
g
er TM0561
(
08601-00907
)
AUDIO & NAVIGATION APPLICATION CHART
TMME-CA Division Dev. Dept. II - Decembe 12th, 2002 Avensis **T25*R (RHD)
p. 1/1
MOP: Factory installed option (1): Glove box application (2): Located under the RH-seat (3): Located under the LH-seat. For required additional parts see the NAVI installation instructions.

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 510-02
NOTE:
The installation position of the hide-away 6 CD-changer in under the driver seat.
12
THE HIDE-AWAY 6 CD-CHANGER
2. SYSTEM LAYOUT
12

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 6
10-02
Fig. 1
Fig. 2
1. Remove the shift knob and shift
cover using a nylon pry tool.
: Clip (4x)
: Nail (4x)
21
3. Attach the protection tape .
4
Fig. 3
2. Remove the panel .
: Clip (5x)
3
3
4
4
3. IN-DASH 6 CD-CHANGER INSTALLATION
1
2
1
2
4
3
5
6

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 710-02
4. Remove the audio unit .
: Bolt (4x)
101
5
Fig. 4
6.
a) Remove the switch .
b) Remove the bulb .
c) Remove the connector by moving it
upward.
27
20
26
Fig. 5
Fig. 6
5. Remove the glove compartment .
a) Remove the hooks .
: Hook (2x)
b) Remove the stoppers by pulling
them inside.
28
104
104
6
6
104
104
26
27
28
28
101
101
5
20

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 8
10-02
Fig. 7
Fig. 8
Approximately 1
7. Cut the tape into 10 equal pieces.
5
8. Relocate the vehicle connector
position from location “A” to location“B”
and attach the connector to the har-
ness using tape and a wire tie .
: Wire tie (1x)
20
20
5
28
28
“A”
“B”
28
28
28
5
20
5
Harness

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 910-02
Fig. 9
9. Route and attach the changer wire
using wire ties .
: Wire tie (3x)
20
20
6
Fig. 10
10. Route the changer wire using wire
ties and wrap the connectors using
tape .
: Tape 2x (3x)
: Wire tie (2x)
20
5
5
20
6
6
6
20
20
Connect
To audio
Vehicle harness
Vehicle harness
To audio
AVC-LAN wire harness
AVC-LAN wire harness
5
5
5
5
6
6
Wire of changer unit
WITH POP UP DISPLAY
Do not connect
Do not connect
WITHOUT POP UP DISPLAY
Do not connect
5

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 10
10-02
11. Cut the template (312N) (see page
22, 23) using scissors.
7
Fig. 11
13. Use protection tape in order not to
damage the surface of the dashboard.
4
Fig. 13
Fig. 12
12. Mark the dashboard using the template
(312N) .
7
Corner fits
Marking
Corner fits
Marking
Drill a hole of 10mm
Hole fit
7
7
4

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 11 10-02
14. Cut the marked position on the dash-
board using a saw.
Fig. 14
Fig. 15
16. Temporary attach the screws in the
existing holes.
: Screw (M6x12) (2x)
106
Fig. 16
15. Cut the marked position on the dash-
board using a saw.
Cut
Saw
Existing holes
Reinforcement pipe
Cut
Cut
Saw
106

17. Fit the side bracket (L) and (R) onto
the changer unit .
: Bolt (M5x8) (4x)
10
30
21
Fig. 17
Fig. 18
19. Cut the glove compartment .
6
Fig. 19
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 12
10-02
18.
a) Fit the switch .
b) Fit the in-dash changer unit .
: Screw (M6x12) (2x)
: Screw (M6x14) (2x)
23
22
30
24
30
30
21
21
10
10
23
23
22
24
Existing marking
Connector
Cut
Blanket
6

20. Fit the glove compartment .
: Hook (2x)
104
6
Fig. 20
21. Cut the panel .
3
Fig. 22
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 13 10-02
6
3
Cut
Cut
104

22. Fit the panel .
3
Fig. 23
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 14
10-02
3

Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 15 10-02
Fig. 24
Fig. 25
Fig. 26
3. Attach the protection tape .
4
2. Remove the panel .
: Clip (5x)
3
1. Remove the shift knob and shift
cover using a nylon pry tool.
: Clip (4x)
: Nail (4x)
21
1
2
4
4
3. HIDE-AWAY 6 CD-CHANGER INSTALLATION
1
2
4
3
5
6
3

4. Remove the audio unit .
: Bolt (4x)
101
5
Fig. 28
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 16
10-02
5
101
101
5.
a) Remove the cover .
: Screw (2x)
b) Remove the centre console .
: Screw (4x)
: Bolt (4x)
107
106
16
105
15
Fig. 29
15
16
107
107
107
106
106
105

8. Cut the tape into 10 equal pieces.
5
Fig. 32
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 17 10-02
6.
a)
Remove the front door scuff plate (R).
: Nail (5x)
b) Remove the kick panel (R)
.
: Nut (1x)
103
9
8
Fig. 30
7. Remove the driver seat .
: Bolt w/washer (4x)
: Cover (2x)
11
106
10
Fig. 31
Fasten the bolt with specified torque
when reassembling.
CAUTION
8
9
103
11
11
10
106
106
25mm
5

10. Route and attach the changer wire
using tape (1x).
5
6
Fig. 34
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 18
10-02
9. Route the changer wire and wrap
the connectors using tape .
: Tape (2x3)
5
5
6
Fig. 33
6
Vehicle Harness
To audio
To audio
AVC-LAN wire harness
AVC-LAN wire harness
Duct
5
5
5
5
5
6
6
WITH POP UP DISPLAY
WITHOUT POP UP DISPLAY
Do not connect
Do not connect
Do not connect
5
6

12. Cut the carpet at the changer unit
attachment position on the driver side.
Fig. 36
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 19 10-02
11.
a) Route the changer wire along the
cross member and attach using
tape (4x).
b) Attach the excess wire of the changer
wire onto the cross member
using tape (6x).
5
12
6
5
12
6
Fig. 35
Cut area
269mm
80mm
500mm
500mm
300mm
270mm
200mm
45mm
185mm
Centre console
Cross member Positioning hole driver seat
Duct
Excess wire
12
6
5
6
5
Vehicle harness

14. Attach the base bracket on the floor
on the driver side.
7
Fig. 38
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 20
10-02
13. Attach the adhesive tapes and the
spacers ( and ) to the base brack-
et using screws .
: Spacer (w/o nut)
: Spacer (w/nut)
: Tape (1x)
*: Tape (cut to size 67mmx50mm) (1x)
: Screw (M5x16) (2x)
8
5
5
16
15
8
7
16
15
5
Fig. 37
7
7
7
8
5
5
5
16
15
15
16
5
*

Fig. 39
Avensis (T25) TOYOTA GENUINE AUDIO
Avensis (RHD) - 21 10-02
16. Fit the changer unit .
a) Connect the changer wire to the
changer unit .
b) Mount the changer unit onto the
base bracket using screws .
: Bolt (M5x10) (4x)
105
10
7
12
12
6
12
Fig. 40
ENSURE THAT ALL REMOVED CONNECTORS ARE
PUT BACK CORRECTLY.
REFIT THE TRIM AND REMOVED PARTS.
Screw
Hole position on the left side
15. Mount the side brackets (2x) to the
changer unit .
: Bolt (M5x8) (4x)
10
12
9
Loosen the screws before moving
them. Tighten up after the position is
changed.
10
CAUTION
9
12
12
9
9
9
10
10
6
7
10
10
Hole position on the right side
CAUTION