Toyotomi TAN/TAG-A28EWI User manual

SERVICE MANUAL
ROOM AIR CONDITIONER
TAN/TAG-A28EWI
TAN/TAG-A32EWI
TAN/TAG-A53EWI
CONTENTS
SPECIFICATION ....................................................................1
FUNCTIONS ..........................................................................7
SERVICE FUNCTION EXPLANATION ..................................9
OPERATION DETAILS.........................................................10
TROUBLESHOOTING GUIDE.............................................16
PERFORMANCE CURVE DIAGRAM ..................................27
ELECTRIC CIRCUIT DIAGRAM ..........................................31
EXPLODED VIEW (INDOOR UNIT) ....................................35
EXPLODED VIEW (OUTDOOR UNIT) ................................37
PARTS LIST (INDOOR UNIT)..............................................39
PARTS LIST (OUTDOOR UNIT)..........................................41
All manuals and user guides at all-guides.com
all-guides.com

SPECIFICATION
– 1 –
Unit
BTU/hCooling Capacity
INDOOR OUTDOOR
–
BTU/hHeating Capacity –
L/h
phase
Moisture Removal –
Power source
Single
V230
Hz 50
OUTLET
Airflow Method
SIDE VIEW TOP VIEW
INTAKE
m/min
Air circulation (at High) Cooling ;
Heating ;
W
Electrical Data
Input
Running Current
Starting Current
Inner diameter
Length
Cooling ;
Heating ; –
–
ACooling ;
Heating ; –
–
A
inch
Piping Connection Port (Flare piping) L L
inch G G
inch
Pipe Size (Flare piping) inch
mm
Drain hose
Length
Height
Width
Depth
Number of core-wire
Power Cord
–
m–
m–
core-wire/ 1 mm –
mm
Dimensions mm
mm
kg
Net Weight
3
2
; Half Union 1/4''
; Half Union 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
; 2-way valve 1/4''
; 3-way valve 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
TAN-A28EWI TAG-A28EWI
10,000(2,700-12,000)
13,200(2,400-18,000)
1.6
3.4
9.0
11.0
660
765
2.9
3.4
14
0.6
1.4
295
799
210
9.1
550
780
278
35
All manuals and user guides at all-guides.com

SPECIFICATION
– 2 –
Unit
Air Circulation
INDOOR OUTDOOR
Cross-flow Fan Propeller Fan
30 40
DC brushless(8-pole) DC brushless (8-pole)
W
Heat Exchanger 21.2FPI 18.1 FPI
Expansion Valve
Plate fin configuration,forced draft
Refrigerant Control Device g (oz)
Refrigerant (R410A )
–1,100(38.8)
–
Thermostat
Air Filter
Parts Provided
Electronic Control
Type
Motor Type
Rated Output
–
Mold-proof –
Specifications are subject to change without notice.
1 Mounting plate
2 Remote controller
3 Battery (2 pcs.)
4 Remote controller holder
5 Screw cap (2 pcs.)
6 Drain elbow
7 Gum Bushing (2 pcs.)
8 Vibration proof rubber (4 pcs.)
Timer –
Real time dual ON/OFF
7-hour OFF
TAN-A28EWI TAG-A28EWI
All manuals and user guides at all-guides.com

SPECIFICATION
– 3 –
Unit
BTU/hCooling Capacity
INDOOR OUTDOOR
–
BTU/hHeating Capacity –
L/h
phase
Moisture Removal –
Power source
Single
V230
Hz 50
OUTLET
Airflow Method
SIDE VIEW TOP VIEW
INTAKE
m/min
Air circulation (at High) Cooling ;
Heating ;
W
Electrical Data
Input
Running Current
Starting Current
Inner diameter
Length
Cooling ;
Heating ; –
–
ACooling ;
Heating ; –
–
A
inch
Piping Connection Port (Flare piping) L L
inch G G
inch
Pipe Size (Flare piping) inch
mm
Drain hose
Length
Height
Width
Depth
Number of core-wire
Power Cord
–
m–
m–
core-wire/ 1 mm –
mm
Dimensions mm
mm
kg
Net Weight
3
2
; Half Union 1/4''
; Half Union 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
; 2-way valve 1/4''
; 3-way valve 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
12,500(2,900-14,100)
17,100(4,000-20,700)
1.7
5.0
9.5
12.5
885
1,130
3.9
5.0
14
0.6
1.4
295
799
210
9.1
550
780
278
35
TAN-A32EWI TAG-A32EWI
All manuals and user guides at all-guides.com

SPECIFICATION
– 4 –
Unit
Air Circulation
INDOOR OUTDOOR
Cross-flow Fan Propeller Fan
30 40
DC brushless(8-pole) DC brushless (8-pole)
W
Heat Exchanger 21.2FPI 18.1 FPI
Expansion Valve
Plate fin configuration,forced draft
Refrigerant Control Device g (oz)
Refrigerant (R410A )
–1,100(38.8)
–
Thermostat
Air Filter
Electronic Control
Type
Motor Type
Rated Output
–
Mold-proof –
Specifications are subject to change without notice.
1 Mounting plate
2 Remote controller
3 Battery (2 pcs.)
4 Remote controller holder
5 Screw cap (2 pcs.)
6 Drain elbow
7 Gum Bushing (2 pcs.)
8 Vibration proof rubber (4 pcs.)
Timer –
Real time dual ON/OFF
7-hour OFF
Parts Provided
TAN-A32EWI TAG-A32EWI
All manuals and user guides at all-guides.com

SPECIFICATION
– 5 –
Unit
BTU/hCooling Capacity
INDOOR OUTDOOR
–
BTU/hHeating Capacity –
L/h
phase
Moisture Removal –
Power source
Single
V230
Hz 50
OUTLET
Airflow Method
SIDE VIEW TOP VIEW
INTAKE
m/min
Air circulation (at High) Cooling ;
Heating ;
W
Electrical Data
Input
Running Current
Starting Current
Inner diameter
Length
Cooling ;
Heating ; –
–
ACooling ;
Heating ; –
–
A
inch
Piping Connection Port (Flare piping) L L
inch G G
inch
Pipe Size (Flare piping) inch
mm
Drain hose
Length
Height
Width
Depth
Number of core-wire
Power Cord
–
m–
m–
core-wire/ 2 mm –
mm
Dimensions mm
mm
kg
Net Weight
3
2
; Half Union 1/4''
; Half Union 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
; 2-way valve 1/4''
; 3-way valve 3/8''
L (liquid side) ; 1/4''
G (gas side) ; 3/8''
17,700(1,700-18,800)
23,800(1,700-33,400)
2.8
8.1
14.0
15.0
1,845
1,800
8.1
7.9
14
0.6
2.3
295
799
210
9.5
550
780
278
35
TAN-A53EWI TAG-A53EWI
All manuals and user guides at all-guides.com
all-guides.com

SPECIFICATION
– 6 –
Unit
Air Circulation
INDOOR OUTDOOR
Cross-flow Fan Propeller Fan
30 40
DC brushless(8-pole) DC brushless (8-pole)
W
Heat Exchanger 21.2FPI 18.1 FPI
Expansion Valve
Plate fin configuration,forced draft
Refrigerant Control Device g (oz)
Refrigerant (R410A )
–1,100(38.8)
–
Thermostat
Air Filter
Parts Provided
Electronic Control
Type
Motor Type
Rated Output
–
Mold-proof –
Specifications are subject to change without notice.
1 Mounting plate
2 Remote controller
3 Battery (2 pcs.)
4 Remote controller holder
5 Screw cap (2 pcs.)
6 Drain elbow
7 Photo-Catalytic Anti-Odor filter (2 pcs.)
8 Static,Catechin filter (2 pcs.)
9 Gum Bushing (2 pcs.)
Timer –
Real time dual ON/OFF
7-hour OFF
TAN-A53EWI TAG-A53EWI
All manuals and user guides at all-guides.com

– 7 –
REMOTE-CONTROL TRANSMITTER
ON/OFF
Operation mode selection
COOL
DRY
HEAT
AUTOMATIC
Air flow selection
AUTOMATIC
HIGH
MEDIUM
LOW
Room temperature setting
16°C〜30°C
Timer operation selection
CONTINUOUS operation
OFF
ON
Sleep
Timer / time setting
Operation stops at the set time
(OFF timer)
Operation starts at the set time
(ON timer)
0.5〜7.0hours(Sleep timer)
Air flow direction control
Auto angle selection
Auto swing mode
Manual mode
INDOOR UNIT
Sensing the room temperature
Room temperature sensor (thermistor)
Time delay safety control
Restarting is inhibited for approximately
3 minutes.
Indoor fan speed control
High, Med, Low
Operation indication lamps (LED)
(GREEN).......Light up in operation
(YELLOW) .... Timer in operation
(GREEN).......Outdoor unit operate
Dry operation mode
AUTOMATIC
Room temperature control
Maintains the room temperature in
accordance with the setting temperature.
Deice (defrost) control
Deicing operation automatically starts
when the heating efficiency is declined by
the ice formed in the outdoor unit.
After deicing operation, heating operation
automatically starts with “Hot start
function.”
FUNCTIONS
All manuals and user guides at all-guides.com

– 8 –
OUTDOOR UNIT
Inverter control
Inverter control reduce the ON/OF times
of compressor,so can keep the room
temperature changeless during
operation.
Electricity consumption
Inverter control can operate with less
electricity consumption than normal air
conditioner.
Deice(Defrost) control
(for outdoor unit panel)
Deice operation automatically starts
when the outdoor temperature is lower
than 2℃and the ice is formed on the
bottom of outdoor unit.
Hot-start control (heating)
The indoor fan stops until the evaporator
piping temperature will be reached.
Anti-freezing control for the
evaporator
Compressor will be stopped when the
evapolator’s piping temperature is below
2℃for one minute.
Compressor will be restarted when the
evaporator’s piping temperature is above
2℃.
Airflow direction control
Automatic airflow direction control
The louver automatically swings up and
down (cooling, dry)...horizontal and 35°
downward.
The louver is set at 70°downward
during heating operation.
Auto recovery function
If there is any power failure during
operation, operation status before power
failure is memorized.
3〜4 minutes after power recovery, the
unit restarts automatically with previous
operation status memorized.
(3〜4 minutes is protective time for
compressor.)
Attention
Because of Auto recovery function, if
shutting off the power supply during
operation, the unit may restart
irrespective your intention when turning
on the power supply next time.
If the unit is not to be used for a long
time, shut off the power supply after
terminating all operation with remote
controller.
FUNCTIONS
All manuals and user guides at all-guides.com

– 9 –
EMERGENCY AND TEST OPERATION
Emergency Operation
•Use this operation only when the remote controller is out of order or lost.
•When the emergency operation switch is pressed, beep starts once, which
means the start of this operation.
•In this operation, the system automatically selects the operation modes, cooling
(or heating when available) according to the room temperature, as follows.
•It is not possible to operate in dry mode.
Test Operation
Test operation switch is same as emergency one.
•Use this operation only for testing the performance of the machine in
the condition where the room temperature is less than 16°C.
•Continue to press the test operation switch for more than 5 seconds.
After you hear twice beep, release your finger from the switch
: the cooling operation starts with the air flow speed “HI.”
•If the test operation switch is pressed more than 10 seconds, it doesn’t
work.
•After 30 minutes, test operation ends automatically.
SERVICE FUNCTION EXPLANATION
J1
Soldering
J1
Temperature
ABOVE 23℃
BELOW 23℃
COOLING
HEATING
26℃
23℃
CONTINUOUS
CONTINUOUS
AUTOMATIC
AUTOMATIC
Operation
mode Designated temperature Timer mode Air flow
HOW TO RELEASE EMERGENCYAND TEST OPERATION
•In case of releasing during those operations, you can either push emergency operation switch once more or
apply operation using remote control.
 You will hear a beep sound and emergency/ test operation is released.
•If you release the operation by remote control, operation will continue as setting of the remote control
automatically.
INTERFERENCE PREVENTION OF SIGNALS FROM THE REMOTE CONTROLLER
When two indoor units used in the same room, interference of the signals may happen. To avoid this, alternative
signal model B can be selected by the following. (Ex-factory setting is modeA)
•Remote controller side : Have “J1” on the PC board short-circuited by soldering.
•Indoor unit side : Cut “R13” on the PC board.
Twice beep
Beep
All manuals and user guides at all-guides.com