TP-Link HS100 User manual

Quick Start Guide
HS100/HS110 – V2
Support
Visit www.tp-link.com/support for technical support
and troubleshooting information.
7106507172 REV 2.0.0
Smart Wi-Fi Plug Installation
1Download Kasa for Mobile from the App Store
or Google Play.
2Connect your mobile device to a 2.4GHz Wi-Fi
network.
3Launch Kasa and follow the app instructions to
connect the Smart Plug to your network.
Note: The Smart Plug only supports the 2.4GHz networks.
Sketch9:41 AM 100%
Power up your Smart Plug
Plug in your Smart Plug.
The Wi-Fi light will turn solid amber.
NEXT
Sketch9:41 AM 100%
DONE
Great!
Your Smart Plug is all set up. It is
now saved in your Device List.
Add Device
Sketch9:41 AM 100%
Smart Plug
Smart Plug Mini
Smart Bulb
Smart Switch
OR scan
QR code

Smart Wi-Fi Plug
Press and hold for 5 seconds or until the
Wi-Fi LED blinks amber and green to
initiate the app onboarding process.
Press and hold for 10 seconds or until the
Wi-Fi LED blinks amber rapidly to factory
reset.
Blinking amber and green: App onboarding
process.
Blinking green: Connecting to the network.
Green: Network connection established.
Blinking amber: Factory resetting.
Amber: Rebooting.
Red: No network connection.
Green: The Smart Plug is switched on.
Off: The Smart Plug is switched off.
USB Port (HS110 Only):Charge your
USB-powered electronic devices.
Maximum output current: 1000mA (1A).
Troubleshooting
1. What devices can I control with the Smart Plug?
You can control lights, electronics and small appliances such as
humidifiers, air purifiers, portable heaters and fans.
2. What should I do when I can’t control the connected device?
•Check that the connected device is switched to ON.
•Make sure your mobile device and the Smart Plug are on the
same Wi-Fi network.
•Enable Remote Control to control the connected device from
outside your home.
3. What should I do when the Wi-Fi LED is lit red?
A red LED light indicates no network connection.
•Check your network connectivity.
•Relocate the Smart Plug. Avoid placing the Smart Plug near
potential sources of radio signal interference.
• Repeat the app onboarding process.
• Factory reset the Smart Plug and try to add it again.
4. How do I pair the Smart Plugs with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa Help
section for pairing instructions.
© 2017 TP-Link. All rights reserved.
Supported Load Types:
Coffee Maker: 800W
Desk Lamp: 235.2W
LCD: 270W
Heater: 1500W
Humidifier: 260W
Iron: 1500W
Toaster: 850W
Tower Fan: 50W