TP-Link TL-PB10400 User manual

Hold the power
button for 3
seconds to turn
on/off the
flashlight.
If you have any questions related to this product,
please contact our technical support:
http://www.tp-link.com/en/support/contact/
Contact Us
For more information, please refer to:
www.tp-link.com
3S
Hold
7022502014 10142
1 light blinking
1 lights on
off
LED Display Battery Capacity
0%~25%
25%~50%
50%~75%
75%~100%
100%
How do I charge the TL-PB10400?
2A: 7h
Via the Power Adapter
1
1A: 10h 0.5A: 25h
Via Computer USB Port
2
1.The TL-PB10400 is compatible with 5VDC adapters. For more efficiency, we
suggest using a 5V/2A power adapter to charge the TL-PB10400.
2.The TL-PB10400 cannot charge other devices while it is charging.
Note:
Keep this device away from water, fire, humidity or hot
environments.
Do not heavily drop or impact this device.
Do not attempt to extrude or pierce this device, which may
cause it to short-circuit.
Do not attempt to disassemble, modify or fix this device by
yourself.
Do not use a damaged power charger or USB cable to
charge this device.
If the product is found to have be bulging or shows other
undesirable phenomena, stop using the product immediately
and contact us or your dealer
Please recycle this device at an appointed disposal location.
This product is not suitable for those lacking relevant
knowledge and experience, please use under the
supervision and guidance of professionals.
Please charge this device once every three months to avoid
shortening its battery life.
Please use the recommended power adapter to charge this
device.
1A
IN
2A
How do I use the TL-PB10400 to charge other
devices?
Just connect your device as shown below to charge.
User Guide 1
5V/1A
5V/2A
Note:
The 5V/2A USB port can automatically adjust its voltage to charge your
5V/1A devices.
10400mAh Power Bank
Model No. TL-PB10400
Power Button
Output1: 5V/2A
Flashlight
Output2: 5V/1A
4 LED Lights
Input: 5V/2A
1 light blinking
1 lights on
off
LED Display Battery Capacity
75%~100%
50%~75%
25%~50%
10%~25%
0%~10%
0
Press the power
button to check the
current battery
capacity, the LED
lights will turn off
automatically after
5 seconds.
2Flashlight
Attention