TP-Link HS107 User manual

User Guide
Kasa Smart Wi-Fi Plug, 2-Outlets
HS107
1910012457 REV1.0.0

Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Smart Plug······································· 4
Main Device Controls··········································· 5
Congure Your Smart Plug································ 6
Create Scenes·························································· 8
Discover Kasa··························································· 9
Authentication························································10

1
About This Guide
This guide provides a brief introduction to Smart Plug and the Kasa app, as well as regulatory information.
Please note that features of Smart Plug may vary slightly depending on the model and software version you have, and on your location, language and
internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.

2
Introduction
With 2-outlets in one smart plug, you can control up to two devices individually while using only one in-wall outlet. Ideal for controlling two lamps in your
bedroom or living room. Download the Kasa app and control your outlets remotely. The Kasa app provides easy step-by-step installation instructions
and convenient remote control from anywhere.
•Two Smart Plugs in One - Independent control of 2 plug-in devices while only using a single in-wall outlet.
• Control from Anywhere - Use the Kasa app on your iOS or Android device to control your smart plug remotely.
• Scheduling - Use Schedules to set your smart plug to automatically turn on and o.
• No Hub Required - Connect to your existing Wi-Fi router.
•Voice Control - Use Alexa, Google Assistant to control your devices with voice commands.
Supported Load Types
Coee Maker: 1500 W Heater: 1500 W Toaster: 1500 W
Desk Lamp: 86.4 W Humidier: 600 W Fan: 74.5 W
LCD: 74.5 W Iron: 1500 W

3
Appearance
Smart Plug has 2 individual smart outlets, with control buttons to turn on or o plug-in devices and LEDs to show you the current status. TP-Link logo
changes color according to dierent status. See the explanation below:
Blinking Orange
Resetting.
Blinking Green
Searching for Wi-Fi.
Red
No Wi-Fi connection.
Blinking Orange and Green
Setup mode initiated.
Wi-Fi LED
Orange
Rebooting.
White
Connected to Wi-Fi network successfully.
Smart Outlet x 2
Plug in your device and control it from your smartphone.
Each outlet is independent.
Control Button x 2
Press the control button to turn on or o the corresponding outlet.
Press and hold a control button for 5s to reenable setup mode.
Press and hold a control button for 10s to restore your smart plug to factory default settings.
LED of Smart Outlet x 2
Lit up when the corresponding smart outlet is on.

4
Set Up Your Smart Plug
Follow the steps below to set up your Smart Plug via Kasa Smart app.
1. Download and install Kasa app
Go to Google Play or the Apple App Store
or scan the QR code below to download the
Kasa app on your Android or iOS smartphone
or tablet.
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Create
Account and the Kasa app will guide you
through the rest.
3. Add Device
Tap the + button in the Kasa app, select Smart
Plug, 2-Outlet and then follow step-by-step
app instructions to complete the setup.

5
Main Device Controls
After you successfully set up your Smart Plug, you will see the home page of the Kasa app. Here you can view the status of all devices that you've
added to Kasa and manage them. There are 2 smart outlets of HS107 and you can tap on a smart outlet to control and manage.
Home Page Device Status

6
Congure Your Smart Plug
On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Usage and change the settings of your smart outlets.
Set Schedule
Tap to set a schedule for your smart
outlet to simplify your daily routine by creating
automatic On/O action.
Preset Away Mode
Ta p to preset the Away Mode and your
smart outlet will be randomly turned on/off
during this time.

7
Set Timer
Tap to set the timer and your smart outlet
will automatically turn on/o after the time ends.
Device Settings
Tap to view and change the settings of
your smart outlet.
Check Usage
Tap to view and track energy consumption.

8
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your
smartphone or tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home
devices should act automatically at special occasions.