Tracker Safe S Series User manual

Owner Use
and
Care Manual
Tracker Safe LLC
6317 NE 63rd Street
Vancouver, WA 98661
[phone]
www.TrackerSafe.com
Document # Tracker Safe-Manual-S Series-05-28-2021
S SERIES
Model #:
S8-B2
S10-B2
S12-B2
S19-B2
NEW VERSION

What’s Included with Your Safe........................................... Page 2
Safe Identication.................................................................. Page 3
Opening your Safe for the First Time................................. Page 4
Operating the Lock with a Code......................................... Page 4
Locking the Safe..................................................................... Page 4
Changing the Code ............................................................... Page 5
Fingerprint Registration....................................................... Page 6
Opening the Safe with a Fingerprint.................................. Page 7
Other Features....................................................................... Page 7
System Reset/Fingerprint Deletion..................................... Page 8
Changing the Batteries......................................................... Page 8
Use, Care, & Maintenance.................................................... Page 9
Warranty................................................................................ Page 10
Warranty Registration Form............................................... Page 11
Table of Contents
2
(Qty 1) Hex Wrench Tool
(Qty 2) Keys
• Anchoring Bolts
What’s Included with Your Safe

Serial Number:
Original Receipt: (Attach Here)
Combination:
ATTENTION:
DO NOT STORE THIS MANUAL
IN YOUR SAFE
Tracker Safe LLC
6317 NE 63rd Street
Vancouver, WA 98661
[phone]
www.TrackerSafe.com
3

4
Opening your safe for the rst time
1) Locate the supplied hex wrench and the key from the
packaging.
2) Use the hex wrench to unscrew the chrome lock cover plate.
3) Insert the key into the lock and turn the key clockwise (to the
right) and gently pull the door open.
4) e battery compartment is located on the back side of the door.
Gently li the tab on the battery cover and pull the cover away.
5) Insert four (4) AA alkaline batteries with a “use date” of at least
ve (5) years in the future. Be mindful of the battery orientation.
Operating the Lock with a Code
1) e factory code is “1234”.
2) Input the code and press and release “ # ”.
3) e screen will display “OPEN” when the locking bolts have
been retracted and the door is unlocked. e locking bolts are
motorized.
Valid Code Entry: e “OPEN” message displayed on screen.
Invalid Code Entry: ree (3) short beeps at the same time as
“Err” displayed on screen.
Locking the Safe
To lock the safe: Press and release the “ # ” button. e screen will
display “CLOSE” when the locking bolts have been extended.

5
1) Read the entire code changing process rst before attempting to
change the code. e code can be changed in the locked or
unlock position.
2) Input the current code or if the code has not been changed then
input the factory code “1234”.
3) Press and hold “ # ” for two (2) seconds.
You will hear two (2) short beeps. Release the button.
4) Input your new code (4-8 digits) and press “ # ”.
You will hear two (2) short beeps.
5) Press “ # ” again.
e screen will display an “Ok” for a successfull code change.
ATTENTION: ree (3) short quick Beeps and “Err” displayed
then the code registration failed.
Changing the Code

6
READ THE ENTIRE PROCESS FIRST.
a) A maximum of 32 ngerprints can be registered in the
lock.
b) It is recomended that you register the same nger multiple
times with slightly dierent posistions on the scanner.
1) With the door open and in the unlocked position (bolts
retracted), locate the Red Button on the backside of the door
near the hinges.
ATTENTION: e lock will not accept ngerprint inputs while the
safe is in the locked position (bolts extended). is
is a security feature.
2) Press and release the Red Button. You will hear two (2) short
beeps and the ngerprint scanner light will turn on.
3) Put your nger on the scanner and hold until the scanner light
turns o. During that time the screen will display “-IN-” and
you will hear two (2) short beeps signaling a successfull
registration.
WARNING: You will have six (6) seconds to place your nger on
the scanner.
ATTENTION: ree (3) short quick beeps and “Err” displayed
indicates the ngerprint input failed.
4) Repeat steps 1-3 for each ngerprint registration.
IMPORTANT SUGGESTIONS:
• Women & Children: If you are having trouble registring your
index nger, try using your thumbs.
•Dry Fingers: Try breathing on your ngers before putting them
on the scanner. e extra moisture sometimes helps
with ngerprint recognition.
Fingerprint Registration

7
Low Battery Warning:
Repeated LED ashing and beeping during an opening indicates
that the battery is low and needs immediate replacement.
Wrong Try Lock Out Period:
ree (3) consecutive invalid code or ngerprint inputs starts a two
(2) minute lock out period. Only the key will open the safe during
this period. “Hold” and “Err” will display on the screen.
Opening the safe with a Fingerprint
1) Press and release “ * ”. e scanner light will turn on.
2) Put your nger on the scanner and hold until the scanner light
turns o. e screen will display “OPEN” when the locking
bolts have been retracted and the door is unlocked.
ATTENTION: ree (3) short quick beeps and “Err” displayed
indicates the ngerprint input failed.
Other Features
Door Open Warning:
When the safe is in the open position (bolts retracted) for longer
than one (1) minute you will hear a beep every 5 seconds. is
warning indicates that the safe is not locked. is is a security
feature that reminds you to lock the safe.
Sound On/O:
Turn Sound OFF: Press “0” then press “ * ” (Star button).
Note: With the sound OFF, you will still hear a door opening beep
and code/nger registration beeps.
Turn Sound ON: Press “1” then press “ * ” (Star button). You will
hear a beep.

8
1) Unlock the safe.
If the batteries are dead use the key to open the safe.
Refer to section “Opening the Safe for the First Time” on page 4.
2) e battery compartment is located on the back side of the door.
Gently li the tab on the battery cover and pull away the cover.
5) Insert four (4) AA alkaline batteries with a “use date” of at least
ve (5) years in the future. Be mindful of the battery
orientation.
Changing the Batteries
1) Open safe with the code or a ngerprint and keep the locking
bolts retracted.
2) Locate the Red Button on the back side of the door near the
hinges.
3) Press and hold the Red Button for 6 seconds. e screen will
ash “INIF” and you will hear two (2) short beeps.
4) All of the ngerprints have been deleted and the code has been
reset to the factory code of “1234”.
ATTENTION: is process cannot be performed with the key.
System Reset/Fingerprint Deletion:

Use, Care, & Maintenance
9
SAFE LOCATION & MOUNTING:
Tracker Safe recommends that safe be mounted/bolted to another
object (like the wall or the oor) to keep it secure.
WARNING! is safe is not intented to be used on it’s back with
the door facing up. Doing so can damage the safe and void the
warranty.
MOVING YOUR SAFE:
Caution: Never move a safe with any contents inside. is can
cause severe damage to the contents being stored and can possibly
cause the safe to be locked in the closed position due to shiing of
contents. In the event that you have to move the safe, it is best to
test the safe aer moving it to ensure it is working properly.
EXTERIOR CLEANING:
Use a so cloth like a microber cloth with a mild cleaner (i.e.,
window cleaner) to clean the exterior of the safe. Make sure to wipe
dry and never use harsh cleaners. Wipe around logos and graphics
gently.
ELECTRONIC LOCKS:
At least once a year, replace the four (4) AA alkaline batteries
with batteries that have a “use date” of at least 5 years on it.
(Recommend: Duracell™, Energizer™, Eveready™)
INTERNAL LOCKING MECHANISM:
e internal locking mechanism does not require maintenance.
However, if there is a sudden change in feel or operation of the safe
or lock, please contact us at TrackerSafe.com or [phone].
HINGES:
Once per year, lubricate the hinges with a silicone spray.
MOISTURE/HUMIDITY:
We recommend that you use some form of a dehumidier to
control the level of moisture inside the safe.

Warranty
LIMITED WARRANTY
Tracker Safe hereby warrants to the original purchaser that each new safe will be free from
defects in materials and crasmanship for one (1) year. is warranty applies only to safes
located in the United States and that have been used for Residential use only.
Safe Contents: is warranty only applies to the Tracker Safe itself; the warranty does not
extend to the personal property stored in the safe.
Tracker Safe’s obligation under this Limited Warranty is contingent upon proper use,
installation, and maintenance of the safe and does not apply to the safe or parts that have
been misused, neglected, or exposed to unreasonable wear and tear, or exposed to unusual
or extreme environments. Modifying or changing the safe in ways that alter or eect the
safe’s intended operation or use will void this warranty. e decision to repair a safe in
purchaser’s home, at the factory, or to replace the safe, is solely that of Tracker Safe. If the
safe is to be repaired at the factory or replaced, Tracker Safe will pay for the freight back
to the factory. e purchaser is responsible for packaging the safe at their own expense.
Tracker Safe does not cover any costs to package, remove or install the safe.
To receive support under Tracker Safe’s Limited Warranty the purchaser must provide the
following:
1) Proof of Purchase
2) Warranty Registration Form
Warranty Registration Form: e warranty registration form is located in the Tracker
Safe Owner Use and Care Manual that came with the safe. To validate this warranty, the
original purchaser must ll out the warranty registration form and mail it to Tracker Safe
within sixty (60) days of purchase.
e above warranty is given in place of all other warranties and assurances, whether
expressed or implied, including warranties to tness for purpose, quality, or
merchantability. Tracker Safe accepts no liability, under any circumstances, for any
incidental or consequential damage or loss suered by anyone, or to any property, as a
result of using or being unable to use the safe.
Any claims arising from this limited warranty shall be resolved in the State of Washington
and Washington law will apply to any dispute.
10

Please provide us with a copy of your receipt along with this
registration form within sixty (60) days from original purchase
date.
Name: ________________________________________
Address:_______________________________________
City:__________________________________________
State:_____________Zip:_____________
Phone:________________________________
Email:_________________________________
Date of Purchase:__________________
Model Number:__________________________________
Safe Serial Number: :______________________________
Purchased From:_________________________________
Comments:
_________________________________________________
_________________________________________________
_________________________________________________
Mail to:
Tracker Safe LLC
6317 NE 63rd Street
Vancouver, WA 98661
Tracker Safe
Warranty Registration form
11