TradeQuip 1014T User manual

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
OWNER’S MANUAL
PRODUCT CODE: 1014T
STEEL WORKBENCH
Product
Code
Safe Working
Capacity
Work Surface
Raised Edge
Height
Dimensions
L x H x W (mm)
1014T
90kg
1500 x 700mm
50mm
1520(L) x 740(W) x 830(H )mm

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications Page 2
Visit us at www.tqbbrands.com.au
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
use of this workbench.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.
CONTENT
WARNING ..................................................................................................................................... 2
CONTENT ...................................................................................................................................... 2
SAFETY INSTRUCTIONS ................................................................................................................. 3
ASSEMBLY INSTRUCTIONS............................................................................................................ 4
PARTS LIST .................................................................................................................................... 5
WARRANTY................................................................................................................................... 6

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
SAFETY OPERATING INSTRUCTIONS
Always distribute objects evenly in the workbench.
Do not lean or climb onto the workbench.
Only use this workbench for the purpose for which it has been designed.
Do not modify any component of this workbench.
When servicing, use only TradeQuip identical replacement parts. Use of any other
parts will void the warranty.
Use the right product for the job. There are certain applications for which the
workbench was designed. Do not modify the workbench and do not use the
workbench for a purpose for which it was not intended.
This product is intended for indoor use only.

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY INSTRUCTIONS
1. FEATURES
This TradeQuip "Made for the Trade" Heavy duty steel construction Workbench is
specifically designed for professional workshop. It is manufactured from high quality,
heavy-duty steel and features a large surface for more work space, with an extended lip
around the surface of the table. The tough high gloss enamel paint finish is designed to
provide years of protection against normal wear and tear.
2. BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as
cracked joins and damaged, loose, or missing parts.
3. ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. The packaging materials
(Polyethylene bags, polystyrene etc.), must be disposed of in an appropriate refuse
collection container. These materials must not be left within the reach of children as they
are potential sources of danger.
4. MAINTENANCE
Regularly wipe dirt and grime from surface with a soft cloth.
Check all fittings are tight before each use.
5. SERVICE & REPAIR
Any Workbench found damaged in any way, or found to be worn or operates abnormally
should be removed from service until repaired by an authorised service agent. Owners and
/ or operators should be aware that repair of this product may require specialised
equipment and knowledge. Only authorised parts, labels and decals shall be used on this
equipment. Annual inspection of the Workbench is recommended and can be made by an
authorised repair facility to ensure that your equipment is in optimum condition and that
the equipment has the correct decals and safety labels specified by the manufacturer.

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications Page 5
Visit us at www.tqbbrands.com.au
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Bolt
4
8
Table Plate
1
2
Support Washer Plate
4
9
Side Plate
2
3
Screw
12
10
Rear Plate
1
4
Flat Washer
8
11
Rear Leg
2
5
Hex Screw
49
12
Rear Pipe
1
6
Front-Left Leg
1
13
Side Pipe
2
7
Flange Surface Screw
32
144
Front Right Leg
1

Jan-19 Product Code: 1014T
Made in China to TQB Brands Pty Ltd specifications Page 6
Visit us at www.tqbbrands.com.au
WARRANTY
TradeQuip products have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship for a period of 12 months
from the date of purchase except where tools are hired out when the guarantee period is ninety
days from the date of purchase.
Should this piece of equipment develop any fault, please return the complete tool to your
nearest authorised warranty repair agent or contact TQB Brands Pty Ltd Warranty team –
[email protected].
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply to normal
wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling,
alterations, accident, or repairs attempted or made by any personnel other than the authorised
TQB Brands Pty Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated
receipt or invoice to verify your proof of purchase within the 12month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.