TrailFX FCLR003B User manual

Visit www.trailfx.com or 1 [phone] for Warranty Information / Tech Support / Product Updates
.
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/26/2021-R01 Page-1-3
APPLICATION: FCLR001B only
Assembly, Installation, Operation and
Maintenance Instructions
Contractors Rack Extension
Part Number:
FCLR003B
10 - 15 minutes
Dealer / Installer: Provide a copy of these instructions to the end user of this product. These instructions
provide important operating and safety information for proper usage of this product.
Demonstrate the proper use of the product with the end user. Have the end user
demonstrate that they understand the proper use of the product.
End User: Read and follow all instructions included in this manual. Ask your Dealer / Installer for
assistance if you do not understand the proper use of the product. Never remove any
decals from the product. Failure to follow these instructions can result in injury or death.
WARNING
HARDWARE PARTS LIST
Sl. No Part Description Qty
A Extension 2
B M16x35mm Bolts 4
C M16 Flat Washers 4
D M16 Lock Nuts 4
TORQUE SPECIFICATION
Size Torque
16 MM 183 ft/lbs
B
A
CD
Integrate the extension with front and rear Side Rails. (Fig 1)
Attach the Extension to front and rear Side Rails using the included (Fig 2)
Fig. 1 Fig. 2

Visit www.trailfx.com or 1 [phone] for Warranty Information / Tech Support / Product Updates
.
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/26/2021-R01 Page-2-3
PRODUCT CARE
• Periodically check the product to ensure all fasteners are tight and components are intact.
• Regular waxing is recommended to protect the finish of the product.
• Use an automotive wax to maintain and protect the finish.
• Clean rack with soft cloth and mild soap to keep the powder coat finish in good condition.
• Mild soap may be used to clean the product for both Stainless Steel and Black finish.
FAQ’s
1. Products are thumping / rattling after Installation
Ensure that all required mounting brackets / hardware’s are installed & tightened correctly.
Suggest using white Lithium / regular grease between metal-to-metal contact.
2. Missing / Excess Hardware
Recheck hardware count as per the part list.
3. Product not installing properly
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
4. Who should be contacted for questions regarding product / installation assistance?
www.trailfx.com / [email protected] or 1-[phone]

Visit www.trailfx.com or 1 [phone] for Warranty Information / Tech Support / Product Updates
.
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/26/2021-R01 Page-3-3
Warranty Terms:
3 Year Limited Warranty:
TrailFX and Keystone Automotive Operations Inc. make no guarantees or warranties for products not
manufactured by Keystone Automotive Operations Inc. Such products are covered solely under any
applicable warranty of the manufacturer. It is always recommended that the operating instructions and
warranty instructions provided by the manufacturer are followed.
Keystone Automotive Operations Inc. warrants its products to be free from manufacturing and material
defects to the original purchaser for the length of warranty stated above from the date of retail purchase.
If any products are found to have a manufacturing or material defect, the product will be replaced or
repaired at the option of TrailFX and Keystone Automotive Operations Inc. with proof of purchase by the
original purchaser. The original purchaser shall pay all transportation and shipping costs associated with
the return of the defective product and the defective product shall become the property of Keystone
Automotive Operations Inc.
The Warranty applies to Keystone Automotive Operations Inc. products used for individual and
recreational purposes. Commercial usage of the Keystone Automotive Operations Inc. products limits the
warranty to 90-days from date of purchase.
The Warranty applies only to Keystone Automotive Operations Inc. products which are found to be
defective in manufacturing or material. This warranty does not apply to normal wear and tear of the finish
placed on Keystone Automotive Operations Inc. products.
TrailFX and Keystone Automotive Operations Inc. are not responsible for any labor costs incurred for
removal or replacement of the defective product.
TrailFX and Keystone Automotive Operations Inc. are not responsible for repair or replacement of any
product under the limited warranty where the product was improperly installed, misapplied, altered,
abused, neglected, overloaded, misused or damaged as a result of an accident, including any use of the
product not in accordance with all product operating and safety instructions.
Without limiting the generality of the foregoing, TrailFX and Keystone Automotive
Operations Inc. shall under no circumstances be liable for any incidental or consequential loss or damage
whatsoever arising out of, or in any way relating to any such breach of warranty or claimed defect in, or
non-performance of the products. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.