TrailFX 968 User manual

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM
45
TO
65
FOOT POUND.
5 min
Cutting Not
Required
INSTALLATION PROCEDURE:
STEP 1: ATTACHING THE STRSP- THRU TURBO- RACK
1. Clean roof surface before use.
2. Inset each end of the bar in the hole in form towers ( printing on foam blocks face outwards).
3. Adjust bar width to place foam towers at outer most part of roof. Simply press in both quick release buttons and slide to
desired position hole.
4. Insert strap hooks into hole at either end of bar (just outside of foam towers).
IMPORANT 1: INSERT STRAP END BCK OF CLAME
1. With doors open, place straps inside vehicle, feed strap end into back of strap claps, check position of foam towers and then
pull strap to tighten in clamp. Secure loose strap end.
2. Recheck position to make sure strap is clear of occupants in vehicle.
3. Consult vehicle owner’s manual for roof weight capacity ( Usually the limit is 100lbs.) TURBO-RACK is intended to support 1
ladder or canoe or item of similar weight.
4. TRACK-RACK Is Designed for occasional use only. It is not intended to be permanently used on a vehicle.
5. STRAP 2: LOADING AND SECURING ITEMS TO TURBO-RACK.
6. Place item directly onto rack and center item.
7. Attach item directly to the rack with rope or bungee core.
8. Attach a front and rear line (rope or ratchet strap) from the item to the front and rear of the vehicle. Protect paint on hood
where this line touches with a pad or cloth.
9. Recheck attachment occasionally during use.
STRAP 2: LOADING AND SECURING ITEMS TO TURBO-RACK
`
Turbo-Rack
Part No. 968
Drilling Not
Required

1. Place item directly onto rack and center item.
2. Attach item directly to the rack with rope or bungee cord.
3. Attach a front and rear line (rope or ratchet strap) from the item to the front and rear of the vehicle. Protect paint on hood where
this line touches with a pad or cloth.
4. Recheck attachment occasionally during use.
WARNING: Do not use this strap- thru rack if your vehicle is equipped with roof mounted side air begs. The turbo – rack
strap could interfere with the bags` deployment.
WARNING
The assumes all risks associated with the use of this product,
Including risk of property Damage, and or personal injury/death.
Do not Exceed the 350 lb. Maximum weight on the Extend-A-Truck
Do not use the Extend-A-Truck in darkness or in conditions with poor visibility.

FAQ’s
1. Can it Uninstall Easily?
Yes, it can be uninstall easily.
2. Is it adjustable to the height for roof top / bed extension?
Yes, it is adjustable.
3. Products are thumping / rattling after installation.
Please ensure that all required mounting brackets / hardware’s are installed & tighten correctly. Suggest using white lithium / regular grease
between the metal to metal contact surfaces.
4. Missing / Excess Hardware.
Recheck hardware count as per the part list.
PRODUCT CARE