Transcend 3 miniCPAP User manual

Thank you for choosing
Transcend 3 miniCPAP!
We want to make sure
you have the best experience
possible as you begin your
CPAP therapy. Please give us
a call if you need assistance
with your initial setup.
Call 866-978-9481, Mon-Fri
8:00 - 4:30 pm CST
Components of the Transcend 3 miniCPAP™
1. Transcend Travel Bag
2. Transcend 3 miniCPAP Quick Guide
3. Standard 6 foot hose
4. Multi-plug universal power supply (PSA2)
5. International plug kit
6. USB Cable
7. Transcend 3 miniCPAP
1
2
4
5
7
3
6

Assembling the Transcend 365 miniCPAP™
1. Connect your mask (sold seperately) to an air supply tube with a
standard 22mm connector.
2. Connect the air supply tube directly to the Transcend 3 miniCPAP
device, making sure it is fully seated.
3. Plug the power supply into the Transcend 3 miniCPAP and place on a
at, stable surface.
4. Connect the power supply to a wall outlet.
Automatic Ramp
The ramp feature is enabled on your CPAP, unless your prescription states
otherwise. As soon as you begin therapy, the ramp feature is automatically
initiated.
First-time CPAP user tips:
• Make sure your mask is tted properly. A mask that is too large or too
small can be uncomfortable or cause a leak. Do not overtighten the
mask. This common mistake can result in discomfort and irritation to
the skin. Some air leak from your mask is common, but if it feels like
too much, consider changing to a dierent mask.
• First, try wearing just the CPAP mask for short periods of time while
you’re awake . For example, while watching TV. Then try wearing the
mask and hose with the device turned on during the day while you’re
awake. Be patient- the time needed in order to adjust to CPAP therapy
varies anywhere from a few days to a few weeks.
The Transcend 3 User Manual
can be downloaded at
www.MyTranscend.com/
support
400213 REV B
Green
LED
Power
button
Ramp
Button
Yellow
LED