Transition Networks SM24T6DPA User manual

Transition Networks SM24T6DPA Quick Start Guide
33670 Rev. A www.transition.com Page 1of 2
SM24T6DPA
24-Port GbE L2 Managed Switch
Quick Start Guide
Safety Warnings and Cautions
See the Install Guide for important Safety Warnings and Cautions, Compliance, and Safety Statements.
Overview
The SM24T6DPA 24-Port Switch is an affordable managed switch that provides a reliable
infrastructure for your business network. The switch delivers intelligent features to improve the
availability of your critical business applications, protect your sensitive information, and optimize your
network bandwidth to deliver information and applications more effectively. Easy to set up and use, it
provides the ideal combination of affordability and capabilities to your Small Business or enterprise
network application and helps you create a more efficient, better-connected workforce.
Front Panel
The switch contains 24 10/100/1000BASE-T RJ-45 ports. All RJ-45 ports support automatic MDI/MDI-X
operation, auto-negotiation and IEEE 802.3x auto-negotiation of flow control, so the optimum data rate
and transmission can be selected automatically.
SFP Transceiver Slots
SM24T6DPA Small Form Factor Pluggable (SFP) transceiver slots are shared with RJ-45 ports 21 to
24; SFP ports 25 and 26 are not shared. In the default configuration, if an SFP transceiver (purchased
separately) is installed in a slot and has a valid link on the port, the associated RJ-45 port is disabled.
See the TN SFP product page for all related information on TN SFPs.
Port and System Status LEDS and System Status LED
The SM24T6DPA switch includes a display panel for system and port indications that simplify
installation and network troubleshooting. The LEDs are on the left side of the front panel.
Connecting to the Console Port
The front panel RJ-45 serial port is used to connect to the switch for out-of-band console configuration.
The command-line-driven configuration program can be accessed from a terminal or a PC running a
terminal emulation program. Configure the serial port as Default Baud rate= 115,200 bps, Character
Size=8 Characters, Parity=None, Stop bit=One, Data bits=8, Flow control=none.

Transition Networks SM24T6DPA Quick Start Guide
33670 Rev. A www.transition.com Page 2of 2
Web-based Management
The default values of the managed switch are listed below:
IP Address 192.168.1.77
Subnet Mask 255.255.255.0
Default
Gateway
192.168.1.254
Username admin
Password admin
After the managed switch has been configured in the CLI via the switch’s serial interface, you can
browse it. For instance, type http://192.168.1.77 in the address row in a browser; the Login screen
displays (see below) prompting you for a username and password for login and access authentication.
The default username and password are both “admin”. For first time use, enter the default username
and password, then click the <Login> button. The login process is complete.
When the login process is complete, the SM16TAT2DPA web GUI displays
Related Manuals
The following manuals describe how to use the management functions of the switch: SM24T6DPA Install
Guide (33664), User Guide (33666), CLI Reference (33665). To access the manuals, firmware, datasheet
or other documentation for your product, enter your model number: SM24T6DPA in the “Search” box at
our website www.transition.com.
Transition Networks * 10900 Red Circle Drive * Minnetonka, MN 55343 USA * Tel: [phone] or
1-800-526-9267 * Fax: [phone] * Copyright© 2015 Transition Networks. All rights reserved.