ASSEMBLY INSTRUCTIONS
STEP 3
Place SHELF (D) on its side and slide each BOTTOM
POLE (A) through each corner cylinder on SHELF (D).
Make sure SHELF (D) corner cylinders are positioned
over SLIP SLEEVES (F).
Stand the unit upright.
Note:
•Level side of SHELF (D) is TOP side (TRINITY logo
on corner cylinders should be right-side up.)
•Use a rubber mallet, if needed, to secure SHELF
(D).
•For convenience, place BOTTOM POLES (A) with
Locking Casters on long side of shelf if rack will be
pushed against a wall, OR, if rack is frequently
rolled around like a cart, place BOTTOM POLES (A)
with Locking Casters on the side being pushed or
pulled.
D
STEP 4
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (F) at
desired height between BASKET (E). Make sure arrow
faces up and word “TOP” is right side up. Do this for
each BOTTOM POLE (A) and make sure height is identical
for each BOTTOM POLE (A).
Lower BASKET (E) over each BOTTOM POLE (A) so corner
cylinders of BASKET (E) are positioned over SLIP SLEEVES
(F).
Note:
•Shelves and Baskets are adjustable in 1" increments
and can be placed as needed to best fit storage needs.
•Use a rubber mallet, if needed, to secure BASKET (E).
E
F
4© 2022 TRINITY - 800.985.5506
