Triton TRADITIONAL User manual

2181169B - May 2021
75mm
200mm
INSTALLERS PLEASE NOTE THESE INSTRUCTIONS ARE TO BE LEFT WITH THE USER
TRADITIONAL
fixed shower head
TRITON ALWAYS RECOMMEND THE USE OF GENUINE TRITON ACCESSORIES
FOR USE WITH A TRITON SHOWER. FAILURE TO USE GENUINE TRITON PARTS
MAY INVALIDATE YOUR GUARANTEE.
All dimensions are approximate.
SAFETY RECOMMENDED TRITON ACCESSORY

INSTALLATION
Before installing the shower head, flush the
pipework through to remove any debris that
may be in the system.
CLEANING THE SHOWER HEAD
Triton recommends that all products are
cleaned using warm, soapy water.
DO NOT use abrasive or aggressive chemical
cleaning products as this may affect the product
surface and finish.
Before cleaning, turn off the unit at the mains
supply to avoid the shower being accidentally
switched on. The shower head may be cleaned
by simply rubbing your thumb over the spray
plate.
IT IS IMPORTANT TO KEEP THE SHOWER
HEAD CLEAN TO MAINTAIN THE
PERFORMANCE OF THE SHOWER. The
hardness of the water will determine the
frequency of cleaning. For example, if the
shower is used every day in a very hard water
area, it may be necessary to clean the shower
head on a weekly basis.
TRADITIONAL FIXED SHOWER
HEAD REPLACEMENT CODE
TSHFTRAD200CH
For latest service policy and contact details visit www.tritonshowers.co.uk
Maintenance InstructionsMaintenance Instructions
NOT FOR USE ON
ELECTRIC SHOWERS