Triumph A9510289 User manual

Accessory Fitting Instructions
1 of 12
Publication part number 9900849 issue 8
© Triumph Designs Ltd. 2019 English
Mobile Phone Holder Kit. 140 mm x 90 mm
Kit Number Models Affected
A9510289 Street Twin up to VIN 914972, Street Cup,
Street Scrambler up to VIN 910740,
Bonneville T100 from VIN 759204, Bonneville T120, Bonneville Bobber,
Bonneville Bobber Black, Bonneville Speedmaster from VIN 739143,
Tiger Explorer XR from VIN 740277, Tiger Explorer XRXfrom VIN 740277,
Tiger Explorer XRT fromVIN740277,TigerExplorerXCfromVIN740277,
Tiger Explorer XCXfrom VIN 740277, Tiger Explorer XCA from VIN 740277,
Speed Triple S, Speed Triple R from VIN 735337,
Tiger XR, Tiger XRT, Tiger XRX, Tiger XC, Tiger XCA,Tiger XCX,
Tiger Sport from VIN 750470
Mobile Phone Holder Kit. 160 mm x 100 mm
Kit Number Models Affected
A9510290 Street Twin up to VIN 914972, Street Cup,
Street Scrambler up to VIN 910740,
Bonneville T100 from VIN 759204, Bonneville T120, Bonneville Bobber,
Bonneville Bobber Black, Bonneville Speedmaster from VIN 739143,
Tiger Explorer XR from VIN 740277, Tiger Explorer XRXfrom VIN 740277,
Tiger Explorer XRT fromVIN740277,TigerExplorerXCfromVIN740277,
Tiger Explorer XCXfrom VIN 740277, Tiger Explorer XCA from VIN 740277,
Speed Triple S, Speed Triple R from VIN 735337,
Tiger XR, Tiger XRT, Tiger XRX, Tiger XC, Tiger XCA,Tiger XCX,
Tiger Sport from VIN 750470
Mobile Phone Holder Kit. 70 mm x 130 mm
Kit Number Models Affected
A9510291 Street Twin up to VIN 914972, Street Cup,
Street Scrambler up to VIN 910740,
Bonneville T100 from VIN 759204, Bonneville T120, Bonneville Bobber,
Bonneville Bobber Black, Bonneville Speedmaster from VIN 739143,
Tiger Explorer XR from VIN 740277, Tiger Explorer XRXfrom VIN 740277,
Tiger Explorer XRT fromVIN740277,TigerExplorerXCfromVIN740277,
Tiger Explorer XCXfrom VIN 740277, Tiger Explorer XCA from VIN 740277,
Speed Triple S, Speed Triple R from VIN 735337,
Tiger XR, Tiger XRT, Tiger XRX, Tiger XC, Tiger XCA,Tiger XCX,
Tiger Sport from VIN 750470

2 of 12
Note:
• The Mobile Phone Holder Kit must not be fitted to a motorcycle when accessory low bars are fitted.
• The Mobile Phone Holder Kit must not be fitted to a motorcycle when a Tank Bag is fitted, with the
exception of Tank Bag A9510280 on Tiger Explorer models.
• The Mobile Phone Holder Kit must not be fitted to a motorcycle when GPS Mounting Kit A9828038 is
fitted.
Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's
use of proven engineering, exhaustive testing, and continuous striving for superior reliability, safety and
performance.
Completely read all of these instructions before commencing the installation of the accessory kit in order to
become thoroughly familiar with the kit’s features and the installation process.
These instructions should be considered a permanent part of your accessory kit, and should remain with it
even if your accessory-equipped motorcycle is subsequently sold.
Parts Supplied
1. Holder, mobile phone 1 off 4. Security strap 1 off
2. Clamp assembly 1 off 5. Packing 1 off
3. Thread protectors 2 off 6. Rain cover 1 off
2
1
3
4
6
5

3 of 12
Note:
• Triumph offers a broad range of approved
genuine accessories for your motorcycle.
We cannot therefore cover all possible
equipment variations in these instructions. For
removal and installation of Triumph Genuine
Accessories, always refer to the instructions
supplied with the respective accessory kit.
To obtain additional copies of any Triumph
accessory instructions, visit
www.triumphinstructions.com or contact your
authorised Triumph dealer.
Installing the Clamp assembly
Note:
• When installing the clamp assembly it should be
fitted directly on to the handlebars. Do not use
the rubber strip included in the kit.
1. Collect the clamp assembly from the kit. Loosen
the plastic nuts sufficiently to allow the clamp
to be opened.
1. Clamp assembly
2. Plastic nut
Warning
The accessory kits covered in this instruction are
designed for use on specific models of Triumph
motorcycle. The accessory kits and the models
applicable are listed at the start of the instruction.
They should not be fitted to any other Triumph
model or to any other manufacturer’s motorcycle.
Fitting an accessory kit to a Triumph model not
listed, or to any other manufacturer’s motorcycle
will affect the performance, stability and handling
of the motorcycle. This may affect the rider’s
ability to control the motorcycle and could cause
an accident.
Warning
Always have Triumph approved parts, accessories
and conversions fitted by a trained technician of
an authorised Triumph dealer. The fitment of
parts, accessories and conversions by a technician
who is not of an authorised Triumph dealer may
affect the handling, stability or other aspects of
the motorcycle’s operation which may result in
loss of motorcycle control and an accident.
Warning
Throughout this operation, ensure that the
motorcycle is stabilised and adequately supported
to prevent risk of injury from the motorcycle
falling.
Danger
Do not use a mobile phone while you ride.
Do not text while you ride.
Do not attempt to adjust any GPS device while you
ride.
Telephone calls, texting or any attempt to use
your mobile device for any purpose will distract
you, this will cause accidents that can seriously
injure or kill riders, passengers, occupants in other
vehicles and pedestrians.
2
1
2

4 of 12
Tiger Explorer XR, Tiger Explorer XRX,
Tiger Explorer XRT, Tiger Explorer XC,
Tiger Explorer XCX, Tiger Explorer XCA
1. Fit the clamp assembly to the handlebars
between the handlebar risers as shown. Ensure
no cables or wiring harnesses are trapped
between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Handlebar
3. Handlebar risers
2. Position the clamp assembly centrally between
the handlebar risers in the orientation shown
below.
3. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars and
cannot rotate around the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar risers
2. Clamp assembly
3. Adjustable mount
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
13
3
4
2
1
3
1

5 of 12
Tiger XR, Tiger XRT, Tiger XRX, Tiger XC,
Tiger XCA, Tiger XCXModels
1. Fit the clamp assembly to the handlebars to
the left hand side of the handlebar riser.
Ensure no cables or wiring harness are trapped
between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Handlebar risers
2. Position the clamp as close as possible to the
bend in the handlebar. The adjustable mount
on the clamp is positioned to the front, as
shown.
3. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar, left hand side
2. Clamp assembly
3. Adjustable mount
Warning
The phone holder kit must not be used if a GPS
mount is fitted to the motorcycle. If a phone
holder kit is used when a GPS mount is fitted it will
restrict handlebar movement which may result in
loss of motorcycle control and an accident.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
2
1
3

6 of 12
Street Twin up to VIN 914972, Street Cup,
Street Scrambler up to VIN 910740 without
Handlebar Brace,
Bonneville T100 from VIN 759204,
Bonneville T120, Bonneville Bobber,
Bonneville Bobber Black,
Bonneville Speedmaster from VIN 739143
Models
1. Fit the clamp assembly to the handlebars to
the left hand side of the handlebar riser.
Ensure no cables or wiring harness are trapped
between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Handlebar riser
2. Position the clamp assembly so that it touches
the handlebar clamp and riser, the adjustable
mount on the clamp is positioned to the front,
as shown.
3. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar clamp and riser
2. Clamp assembly
3. Adjustable mount
Street Scrambler with Handlebar Brace
1. Fit the clamp assembly, with the adjustable
mount facing the rider, to the left hand side of
the handlebars positioned between the clutch
lever and handlebar brace clamp, as shown.
Ensure no cables or wiring harness are trapped
between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Clutch lever
3. Handlebar brace clamp
4. Adjustable mount
2. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
2
1
3
2
1
3
4

7 of 12
Speed Triple S, Speed Triple R Models from
VIN 735337
1. Fit the clamp assembly to the handlebars to
the left hand side of the handlebar riser.
Ensure no cables or wiring harness are trapped
between the clamp assembly and the
handlebars.
1. Handlebar risers
2. Clamp assembly
2. Position the clamp 10 mm from the left hand
handlebar clamp, allowing sufficient clearance
to access the adjustment ring, as shown.
3. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar clamp and riser
2. Clamp assembly
3. Adjustable mount
Tiger Sport
1. Fit the clamp assembly to the handlebars to
the right hand side of the left hand mirror
clamp. Ensure no cables or wiring harness are
trapped between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Mirror clamp, left hand side
2. Position the clamp 35 mm from the left hand
mirror clamp, as shown.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
1
2
3
Warning
The phone holder kit must not be used if a GPS
mount is fitted to the motorcycle. If a phone
holder kit is used when a GPS mount is fitted it will
restrict handlebar movement which may result in
loss of motorcycle control and an accident.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1

8 of 12
3. Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Clamp assembly
2. Left hand mirror clamp
3. Adjustable mount
All Models
1. Fit the thread protectors from the kit to the
exposed thread sections of the clamp assembly
screws, inside the plastic nuts.
1. Clamp assembly
2. Plastic nut
3. Thread protector
Installing and Removing the Phone Holder
1. Align the peg on the phone holder with the
corresponding slot in the phone holder
mounting and press the phone holder onto the
mounting until a click is heard.
1. Notch, phone holder
2. Slot, phone holder mounting
2. Loosen the phone holder mounting by turning
the adjustment ring in an anti-clockwise
direction.
1. Mounting, phone holder
2. Adjustment ring
21
35 mm
3
2
1
3
2
1
2
1

9 of 12
3. Adjust the phone holder to the desired
position. Turn the adjustment ring in a
clockwise direction to lock the phone holder in
position. If necessary, loosen the plastic clamp
nuts and adjust the position of the clamp on
the handlebars to achieve the desired position.
Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars and
cannot rotate around the handlebars. Do not
overtighten the plastic nuts.
4. Collect the security strap from the kit. Feed the
security strap around the handlebars with the
retaining clip and D-ring sections of the strap
at the top, as shown.
1. Security strap
2. Handlebars
3. D-Ring
5. Feed the plain end of the strap through the
D-ring and fold back around the handlebars to
attach the hook and loop sections of the straps
together. Ensure no cables or wiring harness
are trapped between the security strap and
the handlebars.
1. D-Ring
2. Straps, hook and loop sections
6. Attach the security strap clip to the D-ring on
the phone holder.
1. Clip, security strap
2. D-ring, phone holder
7. To remove the phone holder first release the
security strap from the D-ring on the phone
holder.
2
1
3
2
1
2
1

10 of 12
8. Locate the red release lever on the right hand
underside of the phone holder. Press the
release lever down and lift the phone holder
clear of the mounting.
1. Release lever
2. Phone holder
Fitting a Mobile Phone into the Phone Holder
1. Unzip the clear cover on the phone holder and
peel back the hook and loop straps, as shown.
1. Clear cover, phone holder
2. Hook and loop straps
Caution
Move the handlebar to the left and right full lock
while checking that the phone holder or phone
holder mounting clamp assembly do not contact
the fuel tank, or any other part of the motorcycle.
This will result in damage to the fuel tank, or other
parts of the motorcycle. Adjust the phone holder
position as required to ensure the phone holder or
phone holder mounting clamp do not contact any
part of the motorcycle.
Warning
When mounting a phone holder to the mounting
clamp, ensure the view to the instruments is not
impaired.
If the view to the instruments is impaired, the
rider may not be in full control of the motorcycle
which may result in loss of motorcycle control and
an accident.
Warning
Move the handlebars to left and right full lock
while checking that the phone holder or phone
holder mounting clamp do not restrict full lock
operation. Any component that will restrict the
steering may result in loss of motorcycle control
and an accident.
2
1
Danger
Do not use a mobile phone while you ride.
Do not text while you ride.
Do not attempt to adjust any GPS device while you
ride.
Telephone calls, texting or any attempt to use
your mobile device for any purpose will distract
you, this will cause accidents that can seriously
injure or kill riders, passengers, occupants in other
vehicles and pedestrians.
2
1
2

11 of 12
2. Place the mobile phone in the phone holder
with the phone screen towards the clear
plastic cover and secure in place with the hook
and loop straps. If necessary, use the packing
from the kit to ensure the mobile phone is
correctly held in place.
1. Phone holder
2. Mobile phone
3. Hook and loop straps
4. Packing
Installing the Rain Cover
1. Slide the rain cover over the phone holder, as
shown.
2. Squeeze the flaps on the rain cover together to
attach the hook and loop pads and retain the
rain cover in position.
1. Rain cover
2. Hook and loop pads
3. During heavy rain conditions remove the
mobile phone from the holder and place it in a
suitable IP rated protector. The rain cover is
only shower proof.
2
13
4
2
1

12 of 12
Warning
When connecting a power harness to the mobile
phone holder, ensure the harness is routed
correctly and cannot contact any hot surfaces of
the motorcycle or interfere with any of the
motorcycle controls. Contact with a hot surface
may result in wiring harness damage and
electrical malfunctions. Any interference with the
motorcycle controls may result in loss of
motorcycle control and an accident.
Warning
The maximum safe load for the phone holder is
250 grams (9 oz).
Never exceed the safe load limit as this may cause
the motorcycle to become unstable resulting in
loss of motorcycle control and an accident.
Warning
After fitting the accessory kit the motorcycle will
exhibit new handling characteristics. Operate the
motorcycle in a safe area free from traffic to gain
familiarity with any new characteristics. Operation
of the motorcycle when not familiar with any new
handling characteristics may result in loss of
motorcycle control and an accident.
Warning
If, after fitting this accessory kit, you have any
doubt about the performance of any aspect of the
motorcycle, contact an authorised Triumph dealer
and do not ride the motorcycle until the
authorised dealer has declared it fit for use. Riding
a motorcycle when there is any doubt as to any
aspect of the performance of the motorcycle may
result in loss of motorcycle control and an
accident.
Warning
Never ride an accessory-equipped motorcycle at
speeds above 80 mph (130 km/h).
The presence of accessories will cause changes in
the stability and handling of the motorcycle.
Failure to allow for changes in motorcycle stability
may result in loss of control or an accident.
Remember that the 80 mph (130 km/h) limit will be
reduced by the fitting of non-approved
accessories, incorrect loading, worn tyres, overall
motorcycle condition and poor road or weather
conditions.
Warning
The motorcycle must not be operated above the
legal road speed limit except in closed-course
conditions.
Warning
Only operate this Triumph motorcycle at high
speed in closed-course, on-road competition or on
closed-course racetracks. High-speed operation
should only be attempted by riders who have been
instructed in the techniques necessary for
high-speed riding and are familiar with the
motorcycle’s characteristics in all conditions.
High-speed operation in any other circumstances
is dangerous and may result in loss of motorcycle
control and an accident.