truflo TKB Series Instruction manual

Paddle Wheel Flow Meter
TKB SERIES Battery Operated
Read the User's Manual Carefully before Starting to Use the Unit.
Manufacturer reserves the right to implement changes without prior notice.
QUICK START MANUAL
TKB SERIES BATTERY OPERATED FLOW METER
Programming
The TKB Series Paddle Wheel Flow Meter has been Factory
Programmed No K-Factor Programming Required

1. Model Selection
2. General Data
Fluid Water or Chemical Liquid-Viscosity Range: .5-20 centistokes
Accuracy ± 0.5% of F.S. @ 25°C
Flow velocity 10 m / s max
Low cut 0.3 m / s min.
Operating press. 150 PSI (10 Bar) @ Ambient Temp-Non Shock
Range ability 10 : 1
Response time Real time
Material
Paddle = Tefzel | Body = PVC / PP / PVDF / SUS 316 | Shaft / Rotor = Zirconium Ceramic
Operating temperature PVC < 60°C | PP < 80°C | PVDF < 110°C | ST < 120°C
Operating Circumstance -20°C ~ +80° ; 35% ~ 85% RH
Protection Class NEMA 4X IP-66
Approval CE Rohs
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
TKB
- -- -
15 PF V S
Pipe Size Body Material
PVC = PVC
PP = PP
PF = PVDF
ST = SUS 316
O-Rings
Seals
V = Viton***
E = EPDM
End Connections
08 = DN08 (¼")*
10 = DN10 (3/8")*
15 = DN15 (½")
20 = DN20 (¾")
25 = DN25 (1")
* SST Version Only | Note : Sanitary and Flanged Connections Size ½"- 4" Only
** Plastic Versions Only *** Viton is Standard
40 = DN40 (1 ½")
50 = DN50 (2")
65 = DN65 (2 ½"
80 = DN80 (3")**
100 = DN100 (4")**
(PVC) T = NPT | S = SOC | F = Flanged
(PP | PVDF)T = NPT | B = Butt | F = Flanged
(316SS) T = NPT | S = Sanitary | F = Flanged
Product TKB Series Battery Operated LCD Flow Meter
Model TKB- -
Flow total meter Range = 0~999999 ; Unit = Gallon or Liter or Ton (KL) Selectable
Flow rate meter Range = 0.0~999.9 ; Unit = GPM or LPM or TPM Selectable
Operating voltage 3.0 VDC
Battery Lithium Battery (CR2477T)
Life of battery >1 Year Normal >2 Years Eco Mode
Housing material Polycarbonate (UL-94V0)
- -
02
Specification Description

Removable Cover
LPM | GPM | KL
Waterproof Battery
Holder Standard
“C” Type Battery
Screen Backlight
Battery Life
Indication
Removable Cover
(No Tools Required)
1
2
3
4
6
1. Polycarbonate Cover
2. Flow Controller
3. Hall Sensor
4. Redesigned Paddle Wheel
5. Zirconium Ceramic Shaft + Bearings
6. Body | PVC | PP | PVDF *
3. PARTS TKB SERIES
4. DIMENSIONS
5
On Paddle
Assembly
67.0
ECO GAL K L GPM LPM TPM LTR
TKB Series Battery LCD Flow Meter
SET
F
65.0
ECO GAL K L GPM LPM TPM LTR
TKB Series Battery LCD Flow Meter
SET
F
ECO GAL K L GPM LPM TPM LTR
TKB Series Battery LCD Flow Meter
SET
F
49.0
Pipe Size 1/2" FactorK 116
Body PVDF O-Rings Viton
Rate Min. 1.0 GPM Rate Max. 32 GPM
Lot No, 1710
V
E
R
T
I
C
A
L
HORIZONTAL
Zirconium Ceramic
Rotor Pin & Bearings
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
03

5. Programming
Selection of the Engineering Units for Flow Rate | Flow Total
Press Key for Hold 3 Seconds, then press or to select
Flow Rate Units Flow Total | Totalizer Units
0~999999
or
0.1~9999.9
SELECTION DESCRIPTION
Battery Installed | LCD Display On
r = Flow Rate | Default Setting
Programmable
0~9
Selectable
Programming
Backlight 'ON'
Time
Programming
Alarm Delay
time | sec
Factory Unlock Number is 8 Enter
ANY Number from 0 - 9 to Set
Press SET & FF Key for 5 sec Password #
Flow Rate or
Flow Total Display
Flashing
Set Password Enter #
Factory
Preset
Changing K Factor K = #
Press Key for 3 sec (Hold)
Press
& Hold
3 Sec
Press to Scroll Between
Flow Rate and Flow Total Totalizer
or
Press & Key for 5 sec
Press key
dSP-Eco
dSP-non
1. dSP-non | Press any key to turn on the
LED back light | Default is set to 6 seconds
2. dSP-Eco | Backlight LED function is not active
Display Mode dSP.non
Press key
1~9999
In dSP-non mode Backlight default is t-0006 | Set
Duration Time (sec) of Backlight to remain On.
Press any key to turn on the display to turn on
LED light (> Time = < Reduced Battery Life)
Light -On t-5
Press key
1~9999
Delay Time ensures Alarm Setting only becomes
active after the flow remains constant for xx seconds
Programming the High | Low Alarm
Press + 3 Sec to Display High Alarm Setting
Press or to Enter Alarm Value. Press to
Display Low Alarm Setting. Press or to Enter
Alarm Value. The Press to Confirm
Flow Alarm Delay dt-10
Press key
SETUP
SET
SET
SET
SET
SET
ENT
Press key
Programming
Totalizer
Password
1. To Prevent Totalizer reset - Enter Password
Number 0-9 (excluding # 5 ) Flow Totalizer Reset
Protection Active |
2. rESEt.= 5 Default = Flow Totalizer Reset Enabled
Reset Totalizer rESEt.0
SET
F
1. Flow Coefficient = Input pulses x 1/k *
Only required if changing displays from one size to
another i.e. 1" to 2" pipe size
or
SET
SET
SET
Press to Scroll Between Flow
Rate and FlowTotal (Totalizer)
Press to Select
or
Display Flashing
Press to Select
or
Display Flashing
Press to Select
or
Display Flashing
Press to Select
or
Display Flashing
Press to Select
or
Display Flashing
Press to Select
SET
SET
GPM LPM TPM GAL LTR KL
Scrolling Menu
Step-1
Step-2
Step-3
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
04

ECO GAL KL GPM LPM TPM LTR
TKB Series Battery LCD Flow Meter
SET
F
7. How to Set the Alarm Limit of Flow Rate Meter?
7-1. The Flow Total | Totalizer can be Protected from anAccidental Reset. To set lockout
program any number from 0-9 excluding | # 5 | The Unlock Number = 5 = Factory Default
Totalizer Reset Press Both & Keys Together for 3 Seconds
8. Low Battery Notification
3.0V Full Scale
< 3.0V Mild Scale
< 2.8V Low Scale (Pilot BAT flashing)
< 2.6V Low Voltage (Pilot BAT & Display flashing)
Voltage of Battery Symbol of Battery Status
6. Display the Current Value of Flow Totalizer : Range 0~99,999,999
6-1. Please press the key for 3 seconds hold to show current value of the 7th ~ 8th digits
6-2. After releasing the key the current value of the 1st ~ 6th digits will be displayed
ECO GAL KL GPM LPM TPM LTR
Flow RateFlow Rate
Battery Life
Mode of Operation
(Eco) = Extended Battery Life
Press and Hold Set
for 3 Sec to Change
from Flow Rate to
Flow Total
r indicates Default
Flow Rate Mode
Press & Hold for 3 Sec
to view 8 + 9 digits while
in Totalizer Screen
Highlighted to Indicated
Programmed Unit of Measurement
9. Displaying Flow Rate | Flow Totalizer
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
05

Pipe Size 1/2" FactorK 116
Body PVDF O-Rings Viton
Rate Min. 1.0 GPM Rate Max. 32 GPM
Lot No, 1710
Pipe Size 1/2" FactorK 116
Body PVDF O-Rings Viton
Rate Min. 1.0 GPM Rate Max. 32 GPM
Lot No, 1710
Pipe Size 1/2" FactorK 116
Body PVDF O-Rings Viton
Rate Min. 1.0 GPM Rate Max. 32 GPM
Lot No, 1710
Pipe Size 1/2" FactorK 116
Body PVDF O-Rings Viton
Rate Min. 1.0 GPM Rate Max. 32 GPM
Lot No, 1710
GPM
SET
F
+
TKB Series Battery LCD Flow Meter
GPM
SET
F
+
TKB Series Battery LCD Flow Meter
SET
TKB Series Battery LCD Flow Meter
GPM
F
GPM
SET
F
Lightly Press on
Both Sides Battery
Cover
Remove the Battery
Cover Remove the Battery Insert the New Battery
Ensure (+ -) orientation is
correct
1 2 3 4
1 2 Lift the display
Rotate Display Reposition the Display Tighten (Snug) the Allen Screws
Both Sides
3
11. Procedure to Rotate Display
10. Battery Replacement
4 5 6
Lightly pull on the screws in
an outwards direction Screws
are Captive - Do Not
Completely Remove
Use an Allen key and loosen
the screws located on both
side of the display
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
06

10x 3x
CORRECT INCORRECT
10x 3x
CORRECT
INCORRECT
10x 3x
CORRECT
INCORRECT
10x 3x
CORRECT INCORRECT
For More Information Please Contact Us @ 905.469.9283 | [email protected]
TKB Series can be installed in a Horizontal or Vertical direction.
A Plastic Basket Strainer, Bag Filter or Y Strainer Filtering Device upstream to Avoid the Paddle
Wheel from being damaged by the solids or fibers - max 10% Particle Size - Not to Exceed .5mm
Cross Section or Length.
Please Ensure the PIPE is FULL with the fluid under normal operation.
MIN 10x Pipe Diameters Upstream 3x Pipe Diameters Downstream.
12. Installation Positions
Paddle Wheel Flow Meter
TKB SERIES Battery Operated
07