Trust MI-4530p User manual

MI-4530p Wireless Optical Mini Mouse
1
UK
Product information
Mouse
A: Left mouse button
B: Scroll wheel and 3rd mouse button (auto scroll
function)
C: Right mouse button
D: Button to open the battery compartment
E: Battery compartment
F: Connect button
G: On/Off switch
H:Movement sensor
I: Sliders
Receiver
J: Connect button
K: Status LED
L: USB connection
Installation
1 A1; A2 Press the button which opens the battery compartment whilst moving the cover backwards.
B Insert both batteries as shown in the diagram.
C Close the battery compartment.
2 Turn on the PC.
3 Connect the USB receiver to the PC.
4 Press the connect button on the receiver (the status LED will flash).
5 Turn on the mouse and press the connect button on the mouse (the status LED will be lit constantly).
6 If another mouse is not connected to the PC, press the ENTER key on the keyboard.
7 Windows 98: Follow the on-screen instructions. If necessary, insert the Windows 98 CD-ROM into the
CD-ROM drive.
General use
It is recommended to use rechargeable batteries.
If the mouse does not react, press one of the mouse buttons to reactivate it.
Altering the speed of the mouse pointer: (1) Open Windows Help (‘Start – Help and
Support’). (2) Search for ‘'Adjust the speed of your mouse pointer’. (3) Follow the
instructions.
Do not use the mouse on a shiny or glass surface.
If the optical sensor is dirty, clean it with a soft brush.
Wireless performance
• Reduced wireless performance can be caused by:
- Metal objects close to or between the adapter and the other device.
- Empty batteries.
- Other wireless devices close by.
• Solution
- Replace the batteries.

MI-4530p Wireless Optical Mini Mouse
2
Energy
• The device will enter the energy saving mode when it is not used for 30 seconds. To save energy,
turn the device off after use.
• Do not recharge the batteries provided and do not throw them onto a fire.
• Observe the local regulations when disposing of the batteries.
Go to www.trust.com/14511 for up-to-date FAQs and instruction manuals.
Safety instructions
• Never open or repair this device yourself.
• Do not use the device in a damp environment. Clean the device with a dry cloth.
• This device meets the essential requirements and other relevant conditions of the applicable
European directives. The Declaration of Conformity (DoC) is available at www.trust.com/14511/ce.
Wireless
• This wireless device operates at a frequency of 27 MHz and meets all the essential requirements
and other relevant requirements of R&TTE Standard 1999/5/EC. It can be used in the following
countries: all EU countries, as well as RU, TR, NO and HU. There are no limitations per channel
for the above-mentioned countries. Go to www.trust.com/14511 for an updated list of the countries
where the use of this device is permitted.
• There may be restrictions for the use of this device outside of the EU. If this device is used outside
of the EU, check whether this device meets the local regulations. Frequency: 27.195 MHz,
Bandwidth: 50 kHz, Power: 0.01 ~ 0.03 mW.
• Be careful when using this wireless device if you have a pacemaker or are dependent on other
life-saving, sensitive electronic equipment, because this device transmits radio signals.
Warranty & copyright
• This device has a two-year product warranty which is valid from the date of purchase. Go to
www.trust.com/warranty for more information.
• It is forbidden to reproduce any part of this instruction manual without the permission of Trust
International B.V.