Tsun SOL-RSDM-DD User manual

12 3
、
Quick Installation Guide
TSOL-RSDM-DD/DS/CQ
Step 1: Fix the rapid shutdown device
Fix the rapid shutdown device (TSOL-RSDM-
DD&TSOL-RSDM-DS) on the frame of solar
module.
Step 2: Connect the rapid shutdown device
Connect the input of rapid shutdown device to the
solar module.
TSOL-RSDM-DS
TSOL-RSDM-DD
Then connect the outputs of all the rapid shutdown
devices one after another.
Step 3: Fix the rapid shutdown controller
Push out the bracket of the rapid shutdown
controller. Fix the rapid shutdown controller
(TSOL-RSDM-CQ) on the wall.
Warning: Installers should determine the installation
location of rapid shutdown controller according to local
regulations.
Tips: There are no installation screws in the package.
Installer should prepare these screws or expansion bolts
according to the installation environment.
Step 4: Connect the AC cable
Separate the AC connector.

4 5 6
Connect the AC cable. The definition of the port is
shown below:
Port 1(Brown/Red): Live
Port 2(Blue/Black): Neutral
Port 3(Yellow-Green): Ground
Tips: Use AWG 18 (or 1 mm2) cable for AC cable.
Warning: Make sure each cable is connected to the right
port.
Assemble the AC connector.
Plug the connector into the AC socket of rapid
shutdown controller. Then connect the other side
of AC cable to the distribution box or another
power source.
Warning: To prevent electrical hazards, make sure the
power source of rapid shutdown controller is turned to
“OFF” position.
Step 5: Connect the DC cable
Separate the DC connector.
Connect the DC cable.
Tips: Use AWG 12 (or 4 mm2) cable for DC cable.
Assemble the DC connector.
Plug the connectors into the DC connectors of
rapid shutdown controller.
Each rapid shutdown controller can control four
strings of solar modules.
Step 6: Start the rapid shutdown controller
Turn on the power source of rapid shutdown
controller. The rapid shutdown control system will
start to work. The status of lights is shown as below:
Power (Red)
On
Rapid shutdown controller is powered
on and send signals to the rapid
shutdown devices in each string.
Off
Rapid shutdown controller is powered
off or stop sending signals to the rapid
shutdown devices in each string.
Firefighters can push the button to cut off all the
solar modules while in the emergency.
User can rotate the button and the solar module
will work again.
TSUNESS Co., Ltd
TEL: [phone]
E-mail: [e-mail] | www.tsun-ess.com
Add: Building D2, No. 555, Chuangye Road, Dayun Town,
Jiashan County, Jiaxing City, Zhejiang Province, China