TW Audio TC30 User manual

Operation manual
TC30

Operation manual TC30
2
Introduction
Instructions in this user manual
NOTE
TIP
CAUTION
WARNING
Thank you for choosing a high-quality product “MADE IN GERMANY” from the brand
TW AUDiO.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this assembly guide. If you require additional copies of this manual,
you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Tip” identifies additional information or
notes that will simplify working with TWAUDiO products on the basis of practical experience.
The TC30 toolcase is an accessory for the B30 loudspeaker.
This accessory set is characterized by a subtle look, a remarkable size to weight ratio and
ease of use.

Operation manual TC30
3
Notes on the products
Read manual
before use!
Before using the device, carefully read the operating manual and keep it with the TC30 toolcase.
General information
Operation manual: OM-TC30
Version 2.0 en, 07/2022
© by TWAMBO 2022; all rights reserved.
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAMBO.
TWAMBO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TWAMBO reserves the right to update this document based on recent developments.
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de

Operation manual TC30
4
Content
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical specifications .................................................................................................. 8
3.1 Data sheet............................................................................................................... 8
4. Commissioning............................................................................................................... 9
4.1 Setup ...................................................................................................................... 9
4.2 Wind load ................................................................................................................ 9
4.3 System setup with TC30 ....................................................................................... 10
4.4 M20 pole mount flange.......................................................................................... 11
5. Transport and Storage.................................................................................................. 13
6. CE Conformity Declaration............................................................................................ 14
7. Disposal ....................................................................................................................... 15

Operation manual TC30
5
1. Safety | Intended use
WARNING
When working with heavy loads exceeding 20 kg (44lbs.), use suitable aids (dollies, hoisting
slings, etc.). Multiple persons may be required depending on the situation.
Ensure that the units are in a stable position and are firmly attached. A falling loudspeaker can
result in serious personal injury and property damage.
When using and assembling TW AUDiO loudspeakers, only use materials specified by
TW AUDiO. These tasks must be performed by qualified personnel. Adhere to the applicable
safety regulations.
The TC30 toolcase was developed for professional use in sound systems. The toolcase may
only be used by trained and qualified personnel.
Before each use, check the integrity of the TC30 toolcase and ensure that all components are
in perfect condition.
WARNING
The TC30 toolcase may only be used with the B30 and T24N loudspeaker.
These operating manual describe how to use the TC30 toolcase. Any other use shall be
deemed improper and may result in damage or even injury.
Modifications or alterations to individual parts of the TC30 toolcase are not permitted! Danger
to life!
WARNING
Please adhere to the following safety instructions to avoid risks when using accessories.
Note the operating modes described in this operating manual. Other uses are not permis-
sible.
Damage caused by improper use is not covered by TWAMBO.
The TC30 is an accessory designed both for indoor and outdoor use.
CAUTION
The TC30 toolcase may only be used by trained and qualified personnel. Personnel must
check the TC30 for its full suitability before each use.
WARNING

Operation manual TC30
6
When visible damage to any part of the TC30 toolcase is detected, it must be decommissi-
oned immediately.
WARNING
When moving the TC30 toolcase, ensure full load-bearing capacity and stability of the sub-
strate.
The TC30 toolcase is specified for a load of not more than one T24N loudspeaker. This load
capacity must never be exceeded!
WARNING
During movement (assembly or dismantling, transport to the place of use) of the TC30 toolcase
with the B30 or T24N loudspeaker, ensure sufficient space to prevent collisions with other
objects.
WARNING

Operation manual TC30
7
2. Overview
2.1 Components
1. Dolly latch base to attach the TW AUDiO B30 front dolly
2. Front grill
3. 15 mm multiplex housing – Warnex texture paint surface finish
4. Flap for opening the toolcase
5. Latch for closing the flap
6. Rubber feet (8 pieces)
7. Ergonomic carrying handle (top and bottom, left and right)
8. Type label
9. Carrying handle (rear, top and bottom, left and right)
10. Milling for rubberfeet for safely stacking loudspeakers
11. M20 pole mount flange for attaching a distance rod
Figure 2.1 - Overview
3
2 4 51
678 9 10 11

Operation manual TC30
8
3. Technical specifications
3.1 Data sheet
Maximum load capacity 1x T24N
Dimensions (h x w x d) 706 x 446 x 800mm [27.8 x 17.6 x 31.5in]
Weight 29,6 kg [65.3 lbs]
Surface Warnex textured paint

Operation manual TC30
9
4.1 Setup
The TC30 toolcase is designed for standing, vertikal and horizontal operation.
NOTE
WARNING
4. Commissioning
WARNING
Make sure that all system structures are located on a firm, level surface and that the surface
can bear the total weight!
Make sure the speakers are securely fastened to prevent personal injury and property damage.
Secure stacked loudspeakers properly so that they can be tipped by 10° in any direction
without toppling.
TW AUDiO recommends using only the accessories specified by TWAUDiO for securing and
mounting loudspeakers.
4.2 Wind load
WARNING
WARNING
Before setting up the system outdoors, consider unexpected wind conditions at the opera-
tion site!
Disassemble your system immediately when wind speeds exceed 8 bft (34 to 40kn / 62 to
74 kph / 38.5 to 46mph) and secure the system components!
Make sure that there are no persons in the immediate vicinity of the system structure!
Make sure that the system structures are not operated over the audience at wind speeds in
excess of 6 bft (22 to 27kn / 39 to 49kph / 24.2 to 30.45mph) and that there are no persons
in the immediate vicinity of the system structure!

Operation manual TC30
10
Figure 4.3 - System setup with TC30
TC30
B30
T24N
4.3 System setup with TC30
Position a maximum of one B30 loudspeaker with one TC30 toolcase as well as one
T24N loudspeaker on top of each other. Make sure that the system setup is firmly in place to
prevent it from tipping over.
WARNING

Operation manual TC30
11
Figure 4.4.1 - system setup TC30
WARNING
4.4 M20 pole mount flange
WARNING
WARNING
WARNING
For all system components mounted on top of the M20 pole mount flange, observe the res-
pective operating instructions!
Also be sure to observe all of the following warnings:
Make sure that no unauthorized persons can access the system structures!
Cordon off the area professionally!
Make sure that the maximum load of 50kg / 110lbs for the M20 pole mount flange is not
exceeded! Figure 2.1 – Item 11.
The M20 pole mount flange (figure 2.1- item 11) is not designed for side forces once moun-
ted – do not apply any pressure from the sides.
Make sure that no external forces are applied to the system structures. No objects or persons
should lean against the structures, no objects should be thrown against them. If pressure is
applied on the flange the loudspeaker may be damaged or falling over.
Please note that only centered loads are allowed to be placed on the M20 pole mount flange
– Figure 2.1 – Item 11.

Operation manual TC30
12
Figure 4.4.2 - TC30 – improper installation
Figure 4.4.3 - TC30 – improper wall mounting

Operation manual TC30
13
5. Transport and Storage
To transport the unit with a single person, TW AUDiO recommends using the FDB30 front
dolly.
NOTE
Due to the TC30 toolcase weighing over 20 kg [44 lbs.], two persons are required to handle
and transport the unit.
The original packaging is unsuitable as permanent storage and transport packaging.
When transporting and storing the unit, it is important to ensure that the surface and front
grill of the loudspeaker are not damaged. Moisture can penetrate through exposed wood
surfaces and cause the wood to swell.
This is why the product should be transported in a safe, careful, dry and largely dust-free
manner.
The following transport and storage accessories are available from TW AUDiO:
• FDB30 (front dolly)
• Lashing strap

Operation manual TC30
14
as well as all model variants based on these, provided that they correspond to the original
factory models and have not been technically modified in any way.
Applicable directives:
• 2001/95/EG
Applicable national standards and technical specifications:
• DIN EN ISO 12 100
• DGUV Vorschrift 17 und 18
Berlin, Germany, January 1st, 2021
Bernhard Wüstner
This declaration applies to the following components
• TC30
6. CE Conformity Declaration
Copy and translation of the original CE Conformity Declaration:
We hereby declare that the below-referenced components by virtue of their design and con-
struction, and in the configuration placed on the market by us, satisfy the safety and health
requirements of the applicable EC directives. This declaration becomes invalid in case of modi-
fications that have not been approved by us.

Operation manual TC30
15
7. Disposal
If you have any question regarding the disposal of used devices, please contact us under the
following telephone number:
+49 (0) 71 41 - 48 89 89 0
In countries outside of the European Union, comply with local regulations.

Operation manual TC30
16
TWAMBO GmbH
Karl-Hofer-Str. 42
14163 Berlin
Germany
Phone: + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
Table of contents
Popular Tools Storage manuals by other brands

kupper
kupper 12150 Assembly instruction

Seville Classics
Seville Classics UltraDurable SHE15390B manual

kupper
kupper 12110 Series Assembly instructions

Pinnacle
Pinnacle PRO Series quick start guide

Craftsman
Craftsman Professional Series Chests and Roller... Operator's manual

Wheeler-Rex
Wheeler-Rex 8190 Operation manual