Tyco Electronics 2639L User manual

2639L 26” LCD Touchmonitor User Guide

EloTouchSystems
2639L Touchmonitor
User Guide
RevisionA
P/N E983412
Elo TouchSystems
1-800-ELOTOUCH
www.elotouch.com

Elo TouchSystems 2639L User Guide 3
Copyright © 2007 Tyco Electronics. All Rights Reserved.
No part of this publication may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or other-
wise without prior written permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice.
Elo TouchSystems makes no representations or warranties with
respect to the contents hereof, and specifically disclaims any implied
warranties of merchantability or fitness for a particular purpose. Elo
TouchSystems reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of
Elo TouchSystems to notify any person of such revisions or changes.
Trademark Acknowledgments
IntelliTouch, SC (Surface Capacitive), APR (Acoustic Pulse Recogni-
tion), Elo TouchSystems, TE Logo, and Tyco Electronics are trade-
marks. Other product names mentioned herein may be trademarks or
registered trademarks of their respective companies. Elo
TouchSystems claims no interest in trademarks other than its own.

Elo TouchSystems 2639L User Guide 4
Table of Contents
Chapter 1............................................................................................................ 6
Introduction ...................................................................................................6
AbouttheProduct ...............................................................................................................6
Chapter 2............................................................................................................ 7
InstallationAnd Setup ....................................................................................7
UnpackingYourTouchmonitor .............................................................................................8
InterfaceConnection............................................................................................................ 9
InstallingtheTouchDriver ..................................................................................................10
MonitorMountingOrientation ............................................................................................13
Rear View of Monitor—Landscape Orientation....................................................................... 13
Rear View of Monitor—Portrait Orientation ............................................................................ 13
Chapter 3.......................................................................................................... 16
Operation .....................................................................................................16
About Touchmonitor Adjustments...............................................................16
On-ScreenDisplay(OSD)Control Box .............................................................................17
OSD Control Buttons ................................................................................................................ 17
OSD Menu Functions ............................................................................................................... 17
OSD Lock/Unlock .................................................................................................................... 18
Power Lock/Unlock .................................................................................................................. 18
OSD Control Options ................................................................................................................ 19
AutoAdjust ............................................................................................................................... 19
Luminance................................................................................................................................. 19
Brightness ................................................................................................................................. 19
Contrast..................................................................................................................................... 19
Geometry (VGA only)............................................................................................................... 19
H-position .................................................................................................................................. 19
V-position .................................................................................................................................. 19
Clock ......................................................................................................................................... 19
Phase......................................................................................................................................... 19
Color.......................................................................................................................................... 19
Input Select ............................................................................................................................... 19
OSD .......................................................................................................................................... 19
OSD H-Position ........................................................................................................................ 19
OSD V-Position ........................................................................................................................ 19
OSDTimeout ............................................................................................................................ 19
Language................................................................................................................................... 19
Recall ........................................................................................................................................ 20
Miscellaneous............................................................................................................................ 20

Elo TouchSystems 2639L User Guide 5
Sharpness .................................................................................................................................. 20
DisplayInformation................................................................................................................... 20
PresetDisplayModes........................................................................................................ 21
Chapter 4.......................................................................................................... 22
Troubleshooting ...........................................................................................22
SolutionstoCommonProblems ......................................................................................... 22
AppendixA....................................................................................................... 23
Touchmonitor Safety ...................................................................................23
CareandHandlingofYourTouchmonitor ........................................................................... 24
Appendix B ...................................................................................................... 25
Technical Specifications ..............................................................................25
2639LSpecifications .........................................................................................................26
2639L 26” LCDTouchmonitorDimensions .......................................................................28
RegulatoryInformation....................................................................................................... 29
Warranty ...........................................................................................................................32

Elo TouchSystems 2639L User Guide 6
C H A P T E R
1
INTRODUCTION
About the Product
Your new 2639L Elo TouchSystems Touchmonitor combines the
reliable performance of touch technology with the latest advances in
Liquid Crystal Display (LCD) design. The monitor comes with the
followingfeatures:
• 26” color active matrix thin-film-transistor (TFT) with a
native resolution of 1366 X 768.
•Available inAcoustic Pulse Recognition (APR),
IntelliTouch, SecureTouch, and Surface Capacitive touch
technologies.
• Displays input video with horizontal scan frequencies
between 30 KHz and 75 KHz, and vertical scan frequen-
cies between 47 and 63 Hz.
• All monitors have VGA video data inputs and, depending
upon the Part Description (indicating geographical
area where monitors are sold), some monitors have DVI-
D video data inputs.
• All touch technologies come with USB and serial inter-
faces, except for APR, which only comes with a USB
interface.
For more detailed information, please visit our website:
www.elotouch.com.

C H A P T E R
2
INSTALLATION AND SETUP
This chapter discusses how to install and set up your LCD
touchmonitor and how to install Elo TouchSystems driver software.

Elo TouchSystems 2639L User Guide 8
USB Cable
Touchmonitor
Unpacking Your Touchmonitor
Checkthatthe following items arepresent and in goodcondition:
Videocable
Serial Cable
(not included with
2639L-Axxx
models)
OSD Control Box CD and Quick Install Guide
Power cable
DVI-Dcable
(not included with
2639L-xxEx models)

Elo TouchSystems 2639L User Guide 9
Interface Connection
To connect your touchmonitor to your computer:
1Connect the power cable to the rear panel of the monitor and the
other end to the power outlet.
2Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other end to
your computer.
3Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise to
ensure proper grounding. Connect the other end to your computer.
4Press the power button on the rear panel to turn the monitor on.
5Connect the OSD control box to the monitor.
Connector Panel on Rear side of Monitor
VideoCable
OSDbox
connector
PowerCable Power
Button USBcable DVI-Dcable(not
includedwith
2639L-xxExmodels)
SerialCable(not
includedwith2639L-
Axxxmodels)

Elo TouchSystems 2639L User Guide 10
Installing the Touch Driver
Your Elo touchmonitor is Plug-and-Play compliant. Information on the
video capabilities of the touchmonitor is sent to the video display
adapter when Windows starts. If Windows detects the touchmonitor,
follow the instructions on the screen to install a generic Plug-and-Play
monitor.
Elo TouchSystems provides touch driver software that allows your
touchmonitor to work with your computer. Drivers are located on the
enclosed CD for the following operating systems:
• Windows XP
• Windows 2000
• Windows Me
• Windows 98
• Windows 95
• Windows NT 4.0
The latest versions of drivers and driver information for other operating
systems are available on the Elo TouchSystems web site at
www.elotouch.com/support/downloads/.
To install the Touch Driver for Windows XP, Windows 2000, Me and 98,
follow the steps below:
NOTE: For Windows XP and Windows 2000 you
must have administrator access rights to install
the driver.
1Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If Windows XP, Windows 2000, Windows 98, or Windows Me start
the Add New Hardware Wizard, follow these steps (if it does not
open, follow steps 1a through 2a):

Elo TouchSystems 2639L User Guide 11
2Choose Next. Select “Search for the best driver for your
device (Recommended)” and choose Next.
3When a list of search locations is displayed, place a
checkmark on “Specify a location” and use Browse to
select the \EloUSB directory on the Elo CD-ROM.
4Choose Next. Once the Elo TouchSystems touchscreen
driver has been detected, choose Next again.
5You will see several files being copied. Insert your Win
dows 98 CD if prompted. Choose Finish.
If Windows XP, Windows 2000, Windows 98, or Windows Me
does not start the Add New Hardware Wizard:
1a Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If theAutoStart feature for your CD-ROM drive is active, the
system automatically detects the CD and starts the setup
program.
2a Follow the directions on the screen to complete the driver
setup for your version of Windows.
If the AutoStart feature is not active:
1Click Start > Run.
2Click the Browse button to locate the EloCd.exe program
on the CD-ROM.

Elo TouchSystems 2639L User Guide 12
3Click Open, then OK to run EloCd.exe.
4Follow the directions on the screen to complete the driver setup
for your version of Windows.

Elo TouchSystems 2639L User Guide 13
Rear View of Monitor—Landscape Orientation
Monitor Mounting Orientation
When the monitor is mounted in the landscape orientation, the cable
connection panel must be at the bottom, as shown in the illustration
below.
Rear View of Monitor—Portrait Orientation
Alternatively, the monitor may be mounted in the portrait orientation as
shown in the illustration below. If mounted in the portrait orientation, the
cable connection panel may be on either side.
Cableconnectionpanel mustbeat
thebottomforpropermountingofthe
monitor.

Elo TouchSystems 2639L User Guide 14
90º
The mounting orientation can be up to a 90°
angle, as shown in the illustration at left.
The mounting orientation can be up to a 90°
angle, as shown in the illustration at left.
Mounting Orientation Angle Landscape Orientation
90º

Elo TouchSystems 2639L User Guide 15
The mounting orientation can be up to a 90°
angle, as shown in the illustration below.
Monitor Orientation Angle Portrait Orientation
90°
90°

Elo TouchSystems 2639L User Guide 16
C H A P T E R
3
OPERATION
About Touchmonitor Adjustments
Your touchmonitor will probably not require adjustment. However,
variations in video output and application may require adjustments to
your touchmonitor to optimize the quality of the display.
For best performance, your video source should be at 1366 x 768
resolution (the monitor’s native resolution), at 48–63 Hz vertical frame
rate. Operating in other resolutions will degrade video performance.
For vertical frame rates outside the range of 48 to 63 Hz, the monitor
will not automatically adjust, but will display an “Out of Range” (OOR)
message and the OSD menu will be disabled.
Note: Do not operate the touchmonitor if you see the OOR mes-
sage, or LCD damage may result. If you see the OOR message,
please set the video mode to one within the allowable vertical frame
rate range.

Elo TouchSystems 2639L User Guide 17
On-Screen Display (OSD) Control Box
OSD Control Buttons
The On-Screen Display (OSD) Control Box, included with your
shipment, allows you to change settings on the monitor screen. It
has four buttons:
1AUTO/SEL (select)
2DOWN
3UP
4MENU
OSD Menu Functions
Use the control buttons for the following functions:
After adjusting the values, the monitor will automatically save the
changes.
MENU Displays/exits the OSD Menus
UP 1) Enters contrast of the OSD (if no
OSD is currently displayed on screen)
2) Increases value of OSD adjustment choice
3) Selects OSD choice counterclockwise
DOWN 1) Enters brightness adjustment (if no OSD is
currently displayed on screen)
2) Decreases value of OSD adjustment choice
AUTO/SEL 1) Automatically adjusts the image on the screen (this
function not available for 2639L-xxEx models)
2) Selects adjustment choices from the OSD menus.
Control Function

Elo TouchSystems 2639L User Guide 18
OSD Lock/Unlock
You are able to lock and unlock the OSD feature. When the OSD is
locked, no OSD can be displayed or used. The monitor is shipped in
the unlocked position.
To lock the OSD:
1Press the MENU button and UP button simultaneously for 2
seconds.A window will appear displaying “OSD Unlock.”
2Continue to hold the buttons down for another 2 seconds and the
window toggles to “OSD Lock.”
Power Lock/Unlock
You are able to lock/unlock the Power feature. When the power is
locked, pressing the power switch will not turn off the monitor. The
monitor is shipped in the unlocked position. To lock the power:
1Press the MENU button and the DOWN button simultaneously for
2 seconds. Awindow will appear displaying “Power Unlock.”
2Continue to hold the buttons down for another 2 seconds and the
window toggles to “Power Lock.”
NOTE: By default, the OSD screen will disappear
if no input activities are detected for 30 seconds.

Elo TouchSystems 2639L User Guide 19
OSD Control Options
AutoAdjust
• Automatically adjusts video timing parameters (of VGA video
only).
Luminance
Brightness
• Adjusts the brightness.
Contrast
• Adjusts the contrast.
Geometry (VGA only)
H-position
• Moves the image left or right on the screen.
V-position
• Moves the image up or down on the screen.
Clock
• Stretches the image horizontally.
Phase
• Adjusts the phase of the dot clock to image data.
Color
• Sets the color temperature.
Input Select
• Selects between VGA and DVI input signals (not available for
2639L-xxEx models)
OSD
OSD H-Position
• Adjusts the OSD menu screen left or right.
OSD V-Position
• Adjusts the OSD menu screen up or down.
OSD Timeout
• Adjusts amount of time that the OSD menu is displayed.
Language
• Selects the language used for the OSD menu from English,
French, German, Spanish, Italian, Traditional Chinese, Simplified
Chinese, or Japanese.

Elo TouchSystems 2639L User Guide 20
Recall
Recall Color
• Restores default color temperature settings.
Recall Defaults
• Restores original factory settings for H-position,
V-position, Clock, and Phase for the current video mode
(VGA only).
• Restores original factory settings for all other parameters
and video inputs, except language (VGA and DVI).
Miscellaneous
Sharpness
• Adjusts sharpness of video.
Display Information
• Frequency of the input horizontal/vertical synchronizing
signal is indicated.