TYM T454 User manual

TYM
OPERATOR’S MANUAL
FOR
TRACTORS
(T454/T554)
DaeYong B/D, 7, Eonju-ro 133-gil, Gangnam-gu, Seoul, Korea ■TEL: [phone], FAX:[phone] ■www.tym.co.kr

YANMAR
WARRANTIES
YANMAR LIMITED WARRANTY
What is Covered by this Warranty?
YANMAR warrants to the original retail purchaser that a new YANMAR TNV common rail series industrial
engine will be free from defects in material and/or workmanship for the duration of the warranty period.
Note: YANMAR engines may be equipped with external components including, but not limited to: wiring
harnesses, electrical devices, control panels, radiator, air filters, fuel/or exhaust systems that are supplied
and/or installed by manufacturers other than YANMAR. For warranty information on such external
components, please contact the machine or component manufacturer directly or see your authorized
YANMAR dealer or distributor.
This warranty is provided in lieu of all other warranties, express or implied. YANMAR specifically disclaims
any implied warranties of merchantability or fitness for a particular purpose, except where such disclaimer
is prohibited by law. If such disclaimer is prohibited by law, then implied warranties shall be limited in
duration to the life of the express warranty.
How Long is the Warranty Period?
The YANMAR standard limited warranty period runs for a period of twenty-four (24) months or
Two-thousand(2000) engine operation hours, whichever occurs first. An extended limited warranty of
thirty-six(36) months or three thousand(3000) engine operating hours, whichever occurs first, is provided
for these specific parts only: the cylinder block, cylinder head, crankshaft forging, connecting rods,
flywheel, flywheel housing, camshaft, timing gear, and gear case. The warranty period for both the
Standard limited warranty and the extended limited warranty (by duration or operation hours) begins on the
date of delivery to the original retail purchaser and is valid only until the applicable warranted duration has
passed or the operation hours are exceeded, whichever comes first.
1

YANMAR limited warranty- continued
What the Engine Owner must Do:
If you believe your YANMAR engine has experienced a failure due to a defect in material and/or
workmanship, your must contact an authorized YANMAR industrial engine dealer or distributor within thirty
(30) Days of discovering the failure, You must provide proof of ownership of the engine, proof of the date of
the engine purchase and delivery, and documentation of the engine operation hours. Acceptable forms of
proof of delivery date include, but are not limited to: the original warranty registration of sales receipts or
other documents maintained in the ordinary course of business by YANMAR dealers and/or distributors,
indicating the date of delivery of the YANMAR product to the original retail purchaser, This information is
necessary to establish whether the YANMAR product is still within the warranty period. Thus, YANMAR
strongly recommends you register your engine as soon as possible after purchase in order to facilitate any
future warranty matters.
You are responsible for the transportation of the engine to and from the repair location as designated by
YANMAR.
To Locate an Authorized YANMAR Industrial Engine Dealer or Distributor:
You can locate your nearest authorized YANMAR industrial engine dealer or distributor by visiting the
YANMAR Co,. Ltd. Website at:
http://www.yanmar.co.jp (The Japanese language page will be displayed.) For English language “click” on
“English Page.”)
●“click” on “Network” in the website heading to vies the “YANMAR Worldwide Network.”
●Choose and “Click” on the desired product group.
●“Click” on the Icon closest to your region.
●“Click” on the desired country or associate company to locate your nearest authorized YANMAR
Industrial engine dealer or distributor.
You may also contact YANMAR by clicking on “Inquiry” in the website heading and typing in your question
or comment.
What YANMAR will DO:
YANMAR warrants to the original retail purchaser of a new YANMAR engine that YANMAR will make
such repairs and/or replacements at YANMAR’s option, of any part(s) of the YANMAR product covered by
this warranty found to be defective in material and/or workmanship. Such repairs and/or replacements will be
made at a location designated by YANMAR at no cost to the purchaser for parts or labor.
2

YANMAR limited warranty- continued
What is no Covered by this Warranty?
This warranty does not cover parts affected by or damaged by ant reason other than defective materials or
workmanship, including, bur not limited to, accident, misuse, abuse, “Acts of God,” neglect, improper
installation, improper maintenance, improper storage, the use of unsuitable attachments or parts, the use
of contaminated fuels, the use of fuels, oils, lubricants, or fluids other than those recommended in your
YANMAR Operation Manual, unauthorized alterations or modifications, ordinary wear and tear, and rust or
corrosion. This warranty does not cover the cost of parts and/or labor required to perform
normal/scheduled maintenance on your YANMAR engine. This warranty does not cover consumable parts
such as, but not limited to, filters, belts, hoses, fuel injector, lubricants and cleaning fluids. This warranty
does not cover the cost of shipping the product to or form the warranty repair facility.
Warranty Limitations:
The foregoing is YANMAR’s only obligation to you and your exclusive remedy for breach of
Warranty. Failure to follow the requirements for submitting a claim under this warranty may result in a
waiver of all claims for damages and other relief. In no event shall YANMAR or any authorized
Industrial engine dealer or distributor be liable for incidental, special or consequential damages.
Such consequential damages may include, but not be limited to, loss of revenue, loan payments, cost of
rental of substitute equipment, insurance coverage, storage, lodging, transportation, fuel mileage, and
telephone costs. The limitations in this warranty apply regardless of whether your claims are based on
breach of contract, tort(including negligence and strict liability) or any other theory. Any action arising
hereunder must be brought within one (1) year after the cause of action accrues or it shall be barred. Some
states and countries do not allow certain limitations on warranties or for breach of warranties. This
warranty gives you specific legal rights, and you may also have other rights which vary form
state to state and country to country. Limitations set forth in this paragraph shall not apply to the
extent that they are prohibited by law.
Warranty Modifications:
Except as modified in writing and signed by the parties, this warranty is and shall remain the complete and
exclusive agreement between the parties with respect to warranties, superseding all prior agreements,
written and oral, and all other communications between the parties relating to warranties. No person or
entity is authorized to give any other warranty or to assume any other obligation on behalf of
YANMAR, either orally or in writing.
Questions:
If you have any questions or concerns regarding this warranty, please call or write to the nearest
authorized YANMAR industrial engine dealer or distributoror other authorized facility.
3

EMISSION SYSTEM WARRANTY
YANMAR CO., LTD. LIMITED EMISSION CONTROL SYSTEM
WARRANTY – USA ONLY
Your Warranty Rights and Obligations:
■California
The California Air Resources Board (CARB), the Environmental Protection Agency (EPA) and YANMAR
Co,. Ltd. hereafter referred to as YANMAR, are pleased to explain the emission control system warranty
on your industrial compression-ignition engine. In California, model year 2000 or later off-road
compression-ignition engines must be designed, built and equipped to meet the state’s stringent anti-smog
standards. In all states, 1998 and later non-road compression-ignition engines must be designed, built and
equipped to meet the United States EPA emissions standards. YANMAR warrants the emission control
system on your engine for the periods of time listed below provided there has been no abuse, neglect or
improper maintenance of your engine.
Your emission control system may include parts such as the fuel injection system, the air induction system,
the electronic control system, EGR(Exhaust Gas Recirculation) system and Diesel Particulate Filter. Also
included may be hoses, belts, connectors and other emission-related assemblies.
Where a warrantable condition exists, YANMAR will repair your non-rod compression-ignition engine at
no charge to you including diagnosis, parts and labor.
Manufacturer’s Warranty Period:
The model year 1998 or later certified and labeled non-road compression-ignition engines are warranted
for the periods listed below. If any emission-related part on your engine is found to be defective during the
applicable warranty period, the part will be replaced by YANMAR.
4
If your engine
is certified as And its maximum
Power is
And its
rated
speed is
Then its warranty period is
Variable speed or
Constant speed kW<19 Any speed 1,500 hours or two (2) years whichever comes first. In the absence of a device to measure the hours of use,
The engine has a warranty period of two(2) years.
Constant speed 19 ≤ kW < 37 3,000rpm or
higher 1,500 hours or two (2) years whichever comes first. In the absence of a device to measure the hours of use,
The engine has a warranty period of two(2) years/
Constant speed 19 ≤ kW <37 Less than
3,000rpm 3,00hours of five (5) years whichever comes first. In the absence of a device to measure the hours of use, the
Engine has a warranty period of five(5) years.
Variable speed 19 ≤ kW <37 Any speed 3,000 hours or five (5) years whichever comes first.
In the absence of a device to measure the hours of use,
the engine has a warranty period of five (5) years.
Variable speed or
Constant speed kW ≥ 37 Any speed 3,000 hours or (5) years whichever comes first. In the absence of a device to measure the hours of use,
The engine has a warranty period of five (5) years.

Limited emission control system warranty – USA only – continued
Warranty Coverage:
This warranty is transferable to each subsequent purchaser for the duration of the warranty period. Repair
or replacement of any warranted part will be performed at an authorized YANMAR industrial engine dealer
or distributor.
Warranted parts not scheduled for replacement as required maintenance in the operation manual shall be
warranted for the warranty period. Warranted parts scheduled for replacement as required maintenance in
the operation manual are warranted for the period of time prior to the first scheduled replacement. Any part
repaired or replaced under warranty shall be warranted for the remaining warranty period.
During the warranty period, YANMAR is liable for damages to other engine components caused by the
failure of any warranted part during the warranty period.
Any replacement part which is functionally identical to the original equipment part in all respects may be
used in the maintenance or repair of your engine, and shall not reduce YANMAR’s warranty obligations.
Add-on or modified parts that are not exempted may not be used, The use of any non-exempted add-on or
modified parts shall be grounds for disallowing a warranty.
Warranted Parts:
This warranty covers engine components that are a part of the emission control system of the engine as
Delivered by YANMAR to the original retail purchaser, Such components may include the following:
●Fuel injection system
●Electronic control system
●Cold start enrichment system
●Intake manifold
●Turbocharger systems
●Exhaust manifold
●EGR system
●Positive crankcase ventilation system
●Hoses, belts, connectors and assemblies associated with emission control systems
●Exhaust gas after treatment (Diesel Particulate Filter (DPF)
Since emissions-related parts may vary slightly between models, certain models may not contain all of
These parts and other models may contain the functional equivalents.
5

Limited emission control system warranty – USA only – continued
Exclusions:
Failures other than those arising from defects in material and/or workmanship are not covered by this
warranty. The warranty does not extend to the following: malfunctions caused by abuse, misuse, improper
Adjustment, modification, alteration, tampering, disconnection, improper or inadequate maintenance or use
Of non-recommended fuels and lubricating oils; accident-caused damage, and replacement of expendable
Items made in connection with scheduled maintenance. YANMAR disclaims any responsibility for
Incidental or consequential damages such as loss of time, inconvenience, loss of use of equipment/engine
Or commercial loss.
Owner’s Warranty Responsibilities:
As the engine owner, you are responsible for the performance of the required maintenance
listed in Your owner’s manual. YANMAR recommends that you retain all documentation, including
receipts, covering maintenance on your non-road compression-ignition engine, but YANMAR cannot deny
Warranty solely for the lack of receipts, or for your failure to ensure the performance of all scheduled
maintenance.
YANMAR may deny your warranty coverage of your non-road compression-ignition engine if a part has
Failed due to abuse, neglect, improper maintenance or unapproved modifications.
Your engine is designed to operate on diesel fuel only. Use of any other fuel may result in your engine no
Longer operating in compliance with applicable emissions requirements.
You are responsible for initiating the warranty process. You must present your engine to a YANMAR dealer
As soon as a problem exists. The warranty repairs should be completed by the dealer as expeditiously as
Possible. If you have any questions regarding your warranty rights and responsibilities, or would like
Information on the nearest YANMAR dealer or authorized service center, you should contact YANMAR
America Corporation.
Website: (www.yanmar.com)
E-mail: CS [e-mail]
Toll free telephone number: 1-800-872-2867, 1-855-416-7091
6

FOREWARD
Thank you very much for purchasing our tractor, which, we feel sure, will give you many years of
troubling the service.
The introduction in this manual set out the correct manner of operating, maintaining and checking the
tractor to ensure long-term durability.
Please ensure correct operation of the tractor as incorrect operation can cause substantial mechanical
damage as well as cause accidents with the associated injuries.
Please note that in some cases differences can exist between this manual and your tractor due to the
manufacture’s policy of constant product improvement.
In the event that you strike a problem not covered by this manual please contact your nearest dealer who
will assist you in resolving your problem.
7
WARNING
CALIFORNIA Proposition 65 Warning
The Engine Exhaust from this product contains chemicals known to the state
of California to cause cancer,birth defects or other reproductive harm
WARNING SIGNS IN THIS MANUAL
The following warning signs in this manual draw additional attention to items of importance for the safe and
correct operation of the tractor.
SIGN MEANING OF THE SIGN
Serious hazard with a very high level of risk of either serious injury
or death.
Hazard or unsafe practice that can lead to severe injury or death.
Hazard or unsafe practice that can lead in injury or death.
Instructions for the correct operation of the machine which, if
followed, will ensure that it performs at it’s best.
All information,illustrations and specifications in this manual are based on latest information available at
the time of publication.The right is reserved to make changes at any time without notice.
Danger
Warning
Important
Caution

CONTENTS
1. Tractor Identification ------------------------------------------------------------------------------------------
2. About this manual ----------------------------------------------------------------------------------------------
3. Introduction & Description --------------------------------------------------------------------------------
4. Owner assistance -----------------------------------------------------------------------------------------------
5. ROPS (Roll over protection structures) -----------------------------------------------------------------
6. Safety instructions, Do’s & Don’ts ---------------------------------------------------------------------
7. Safety signs -------------------------------------------------------------------------------------------------
8. Universal symbols ----------------------------------------------------------------------------------------------
Section A
9. Controls, Instruments & Operations --------------------------------------------------------------------
Section B
10. Lubrication & maintenance ----------------------------------------------------------------------------
Section C
11. CABIN ----------------------------------------------------------------------------------------------------
Section D
12. Specifications -------------------------------------------------------------------------------------------
13. Fuel saving Tips ---------------------------------------------------------------------------------------
14. Fault tracing -----------------------------------------------------------------------------------------
15. Wiring Diagram ---------------------------------------------------------------------------------------
16. Power train ------------------------------------------------------------------------------------------------
17. Tractor history card -----------------------------------------------------------------------------------------
18. Service record ---------------------------------------------------------------------------------------------
19. Daily operating Log ---------------------------------------------------------------------------------------
20. Part replacement record -----------------------------------------------------------------------------------
Sr. No. Description Page No.
All information, illustrations and specifications in this manual are based on latest information available at
the time of publication. The right is reserved to make changes at any time without notice.
8
9
10
11~13
14
15~17
18~30
31~33
34
35~61
62~84
85~96
97~101
102~103
104~107
109~114
115
116
117
118
119

TRACTOR IDENTIFICATION
The engine number is stamped on the left hand side of the engine block.
The chassis number is shown on the left hand side of the tractor as shown in the drawing.
Illustration A
WARRANTY OF THE PRODUCT.
The manufacturer warrants this product and full details of the warranty are provided on a separate
warranty schedule.
SERVICE.
Service is available from any TYM dealer in the country.
PARTS.
To obtain spare parts please contact your nearest dealer and give him the details listed below.
Tractor model
Tractor serial number
Tractor engine number
Part number and description
Quantity required.
9
Stamped position of the
Engine type or Number
Stamped position of the chassis number

ABOUT THIS MANUAL
This manual has been prepared to assist you in following/adopting the correct procedure for running-in
operation and maintenance of your new Tong Yang Moolsan CO.,LTD (Here in after refer to TYM)
Tractor.
Your Tractor has been designed and built to give maximum performance, with good fuel economy and
ease of operation under a wide variety of operating conditions. Prior to delivery, The tractor was
carefully inspected, both at the factory and by your TYM Dealer/Distributor, to ensure that it reaches
you in optimum conditions .To maintain this condition and ensure trouble free performance. it is
important that the routine services, as specified in this manual, are carried out at the recommended
intervals.
Read this Manual carefully and keep it in a convenient place for future reference. If at any time you
require advice concerning your Tractor, do not hesitate to contact your Authorized TYM
dealer/Distributor. He has trained personnel, genuine parts and necessary equipments to undertake all
your service requirements.
Manufacturer’s policy is one of continuous improvement, and the right to change prices, specifications
or equipments at any time without notice is reserved.
All data given in this book is subject to production variations. Dimensions & weight are approximate
only and the illustrations do not necessarily show Tractors in standard condition. For exact information
about any particular Tractor, please consult your TYM dealer/Distributor.
10

INTRODUCTION & DESCRIPTION
TRACTOR AN INTRODUCTION
The word, ’Tractor’ has been derived from ‘Traction’ which means pulling.
A Tractor is required to pull or haul an equipment, implement or trolley which are coupled to the Tractor
body through suitable linkage. A Tractor can also be used as a prime mover as it has a power outlet
source which is also called Power Take or PTO shaft.
In this book the operating, maintenance and storage instructions for all models of TYM Diesel Tractors
has been complied. This material has been prepared in detail to help you in the better understanding of
maintenance and efficient operation of the machine.
If you need any information not given in this manual, or require the services of a trained mechanic,
please get in touch with the TYM Dealer/Distributor in your locality. Dealer/Distributors are kept
informed of the latest methods of servicing Tractors. They stock genuine spare parts and are backed by
the Company’s full support.
Through this manual. The use of the terms LEFT,
RIGHT, FRONT and REAR must be understood,
to avoid any confusion when following the
introductions. The LEFT and RIGHT means left
and right sides of the Tractor when facing
forward in the driver’s seat, Reference to the
FRONT indicates the radiator end of the Tractor,
while the REAR, indicates the drawbar end
(illustration B)
When spare parts are required, always specify
the Tractor and engine serial number when
ordering these parts.(See illustration A).This will
facilitate faster delivery and help ensure that the
correct parts for your particular Tractor is
received. The tractor serial number is punched
on a plate attached to the left hand side of the
engine body (illust.A),For easy reference, we
suggest you to write the number in the space
provided in the owner’s personal data.
illustration B
( Front, Rear,Left,Right Portion)
11

DESCRIPTION
■General construction
The transmission case, Clutch, Clutch housing, Engine and Front Axle Support are bolted together to form a
rigid unit
■Front Axle & Wheels
The 4WD front axle is a center-pivot, reverse Eliot type. The front wheel drive mechanism is incorporated as a
part of the axle.
The front wheel drive power is taken off the rear transmission and transmitted to the differential in the front
axle where the power is divided into right and left and to the respective final cases.
In the final cases, the transmitted revolution is reduced by the level gears to drive the front wheel. The 4WD
mechanism with level gears provides wider steering and greater durability.
■Engine
The tractors are fitted with fuel efficient Non-Turbo charged engine with 4 cylinders of T454 designed by
Yanmar and T554 is fitted with fuel efficient Turbo charged engine.
■Clutch and Transmission
A single plate dry clutch (10.24"diameter) is used on these tractors. Tractor with IPTO(Independent Power
Take Off) are fitted with hydraulic Clutch Assy. The transmission Gear box has 16 forward & 16 reverse
speeds of T454/T554. Presently, TYM Tractors are fitted with partial synchro mesh type gears.
■Brakes
TYM tractors are provided with independent disc brakes operated by two road travel. A foot brake lever is
fitted for parking.
■Rear axle & Wheels
This is mounted on ball bearings and is enclosed in removable housing which are bolted to the transmission
case. The rim & Disc fitted with Rear tires are bolted to the outer flange of Rear Axle.
■Hydraulic system & Linkages.
TYM Tractors are fitted with Live (i.e. system is in operation even when clutch is disengaged.) independent,
very touch of hydraulic System. Three point Linkages can be used for USA-Category 1type, EU-Category 2
type of implements.
12

■Steering
It consists of Hydrostatic Power steering system, which has a hydraulic cylinder and tandem type
hydraulic pump
■Electrical System
A 12 Volt Lead Acid Propylene Battery is used to activate the Engine through the Starter Motor and the
Electrical system comprising Horn, Head Lamp. Side indicator Lamps, Brake Light, Gauge lamp,
Hazard Lamp. Generator or Alternator, Fuse box also from part of the Electrical system.
13
Warning
When operating the tractor at High speed, Do not attempt to make sharp turns by
using the brakes.This may result in overturning of the Tractor causing serious
injury or DEATH.

OWNER ASSISTANCE
We at TYM CO.,LTD and your TYM Dealer/Distributor wants you to be completely satisfied with
your investment. Normally any problems with your equipment will be handled by your
Dealer/Distributor’s Service Departments, however, misunderstanding can occur. If you feel that your
problem has not been handled to your satisfaction, we suggest the following.
Contact the owner or General Manager of the Dealership, explain the problem, and request assistance.
When additional assistance is needed, Your Dealer/Distributor has direct access to your office. If you
cannot obtain satisfaction by doing this, contact the TYM CO.,LTD. Office and provide them with;
•Your name, address and telephone number
• Model and Tractor serial number
• Dealer/Distributor Name & Address
• Machine purchase date and Hours used
• Nature of problem
Before contacting TYM CO.,LTD office, be aware that your problem will likely to be resolved in the
Dealership using the Dealer’s/Distributor’s facilities, equipment and personnel. So it is important that
your initial contact be with the Dealer/Distributor.
14

(ROPS) Roll Over Protective Structures
Roll Over Protective Structures (ROPS)
TYM Tractors are equipped with a frame for the protection of operators.
In the case of cab tractors the frame is incorporated in the cab structure.
The objective of the frame or cab structure is to protect the operator in the event of a roll over
and they are designed to support the entire weight of the tractor in that event.
Each TYM ROPS frame or cab structure is designed and has been tested to meet industry and or
Government standards.
Included in these tests were all mounting bases and bolts or other fasteners.
DANGER
For ROPS frames to be effective and protect the operator, the seat belt provided must be
worn in order to keep operators within the ROPS protected area in the event of a roll over.
Failure to use the seat belt can still cause serious injury or death.
On some models the ROPS frame has a fold down feature, which can be used to enter low
buildings etc.
Take care when lowering the upper section of the ROPS frame and take extreme care while
driving the tractor with the ROPS frame lowered.
Do not wear the seat belt with the ROPS lowered and please remember that the fold down facility
is for special circumstances only and must not be lowered for general use.
Use of the tractor with the ROPS lowered can cause fatal injuries.
As the ROPS frame or cab together with the seat belt was designed to meet certain standards,
they must be maintained in good order and condition.
To achieve this objective, both the structure and the seat belt should be inspected on a regular
basis (every time the tractor is serviced)
In the event that the seat belt is damaged or frayed, it should be replaced and in the event that the
ROPS frame or any part of the mounting structure is damaged or cracked, the faulty component
must be replaced with a new unit.
Such a unit must meet all of the test criteria of the original unit.
Fitment of an inferior item or items affects the certification of the entire ROPS structure and the
effectiveness of the structure in the event of an accident.
Drilling or welding of the ROPS structure is forbidden.
15

16
Damage of the ROPS
If the tractor has rolled over or the ROPS has damaged (such as striking an overhead object during
transport), It must be replaced to provide the original protection. After an accident, check for damages to the
1.ROPS.2.Seat 3.seat belt & seat mountings. Before you operate a Tractor, replace all damaged parts.
DO NOT WELD, DRILL OR STRAIGHTEN THE ROPS
Never attach chains, ropes to the ROPS for pulling purposes; this will cause the
Tractor to tip backwards. Always pull from the Tractor drawbar. Be careful when
driving through door opening or under low overhead objects. Make sure there is
sufficient overhead clearance for the ROPS fatal injuries
If the ROPS is removed or replaced, make certain that the proper hardware is
used to replace the ROPS and the recommended torque values are applied to the
attaching bolts
Always wear your seat belt if the tractor is equipped with ROPS
(CABIN type) (Roll-bar type)
Warning
Warning
Warning

NOTE: Do not use solvents to clean the seat. Use warm water with a little detergent added.
Before operating a Tractor it is important to adjust the seat to the most comfortable position & check whether
it is properly locked in its position. Figure 1 identifies the seat fitted to your Tractor.
FOR SLIDING SEAT
To select Seat position, move Adjusting lever and slide Seat closer to or away from Dash panel and controls.
Check whether the seat properly locked in its position before driving the tractor.
17
Seat Adjusting Lever
Fig.1
Always use the seat belt when the ROPS is installed.Do not use the seat belt if a
foldable ROPS is down or there is no ROPS.Check the seat belt regularly and
replace if frayed or damaged.
Danger
Danger

SAFETY INSTRUCTIONS
SIGNAL WORDS.
A signal word―DANGER, WARNING OR CAUTION―is used
with safety alert symbol. DANGER identifies the most serious
hazards. Safety signs with signal Word ―DANGER OR
WARNING―are typically near specific hazards. General
precautions are listed on CAUTION safety signs.
READ SAFETY INSTRUCTION
Carefully read all safety instructions given in this manual for
your safety. Tempering with any of the safety devices can cause
serious injuries or death. Keep all safety signs in good condition.
Replace missing or damaged safety signs.
Keep your tractor in proper condition and do not allow any
unauthorized modifications to be carried out on the Tractor,
which may impair the function/safety and affect Tractor life.
PROTECTION CHILDREN
Keep children and others away from the Tractor while operating.
BEFORE YOU REVERSE
- Look behind Tractor for children.
- Do not let children to ride on Tractor or any implement.
18
RECOGNIZE SAFETY INFORMATION
This symbol means ATTENTION! YOUR SAFETY IS
INVOLVED. The message that follows the symbol contains
important information about safety. Carefully read the message
DANGER
WARNING
CAUTION