U.S. General 70320 Assembly instructions

72" TRIPLE BANK TOP CHEST
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 22l
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2022 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. 72" Top Chest
SAFETY OPERATION MAINTENANCESETUP
IMPORTANT SAFETY INFORMATION
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. Do not have more than one
drawer open at a time.
2. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
DO NOT STEP IN OR ON DRAWERS.
3. Do not allow children to play with or near this
item. This item is NOT children’s furniture.
4. Do not exceed drawer weight capacity, 120 lb per
connected pair of slides. Evenly distribute load
from bottom up. Uneven loading causes tipping. Be
aware of dynamic loading! Sudden load movement
may briefly create excess load causing tipping.
5. Close and lock drawers before moving.
Do not pull, push to move.
6. Center securely within lip on top of cabinet.
7. Place on top of matching cabinet only.
8. Have assistant help place on cabinet.
9. Do not lift while loaded.
10. Close lid when not in use. Lid must be
open for drawers to be unlocked.
11. Use as intended only.
12. Inspect before every use;
do not use if parts are loose or damaged.
13. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Page 3For technical questions, please call 1-888-866-5797.72" Top Chest
SAFETYOPERATIONMAINTENANCE SETUP
Specifications
Drawer Capacity 120 lb per connected pair of slides
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
2. Close all Drawers and lock them.
3. If stacked on Bottom Cabinet, to
prevent tipping, push/pull using supplied
handle on Bottom Cabinet only.
4. If using separately from Bottom Cabinet, get
an assistant to help move the Chest.
5. Place only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.
6. Unlock Drawers and fill Chest evenly, from bottom
to top. Do not exceed weight capacities.

Page 4 For technical questions, please call 1-888-866-5797. 72" Top Chest
SAFETY OPERATION MAINTENANCESETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
condition of the Chest. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
2. Wipe external surfaces of the Chest with clean cloth.
3. Lubricate Drawer Slides as needed.

Page 5For technical questions, please call 1-888-866-5797.72" Top Chest
SAFETYOPERATIONMAINTENANCE SETUP
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Parts may not be interchangeable.
Specify UPC number when ordering:
Black: Item 70320, UPC 193175495815
Blue: Item 70321, UPC 193175495822
Gray: Item 70322, UPC 193175495839
Green: Item 70323, UPC 193175495846
Orange: Item 70324, UPC 193175495853
White: Item 70325, UPC 193175495877
Yellow: Item 70326, UPC 193175495884
Red: Item 58708, UPC ,193175444905

Page 6 For technical questions, please call 1-888-866-5797. 72" Top Chest
SAFETY OPERATION MAINTENANCESETUP
Parts Lists and Diagrams
Parts List
Part Description Qty
1Drawer Trim 8
2 Drawer Latch 8
3 Trim Screw, ST4.8 x 7.2 28
4Drawer Trim 4
5 Drawer Latch 4
6 Drawer Mat 8
7 Drawer Mat 4
8Top Tray Mat 1
9 Drawer Slide 15
10 Gas Strut 2
11 Lock 1
Part Description Qty
12 Key 4
13 Lock Link 1
14 Lock Lever 1
15 Grommet Cover 2
16 Grommet 1
17 Grommet Screw, M6 x 20 1
18 Grommet Nut, M6 1
A Drawer 3
B Drawer 6
C Drawer 1
D Drawer 2

Page 7For technical questions, please call 1-888-866-5797.72" Top Chest
SAFETYOPERATIONMAINTENANCE SETUP
Diagram
6
8
10
11
15 16
17
18
B
1
2
3
4
57
9
12
A
C
D
13
14

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.