Ubiquiti NanoStatonM Series User manual

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 1/19
NanoStat  on M2/M3/M365/M5 Z  p T  e PoE (24V, 0.5A) w  th Mount  ng
Bracket
Power Cord
NanoStat  onloco M2/M5 Z  p T  e PoE (24V, 0.5A) w  th Mount  ng
Bracket
Package Contents
NSM2/NSM3/NSM365/NSM5
locoM2/locoM5
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 2/19
Power Cord
NanoStat  onlocoM9 Z  p T  e PoE (24V, 0.5A) w  th Mount  ng
Bracket
Power Cord
locoM9
Installat  on Requ  rements
Sh  elded Category 5 (or above) cabl  ng w  th dra  n w  re should be used for all w  red
Ethernet connect  ons and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor env  ronments
and destruct  ve ESD events w  th  ndustr  al-grade, sh  elded Ethernet cable from
Ub  qu  t  . For more deta  ls, v  s  t u  .com/toughcable
Surge protect  on should be used for all outdoor  nstallat  ons. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the NanoStat  on and
the other at the entry po  nt to the bu  ld  ng. The ETH-SP w  ll absorb power surges
and safely d  scharge them  nto the ground.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 3/19
Hardware Overv  ew
NSM2/NSM3/NSM365/NSM5/locoM2/locoM5
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 4/19
Power LED
The LED w  ll l  ght green when the dev  ce  s connected to a power source.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 5/19
LAN1 LED
LAN2 LED
S  gnal LEDs
Secondary Port
Ma  n/LAN* Port
Reset Button
The LED w  ll l  ght steady green when an act  ve Ethernet connect  on  s made to the
Ma  n/LAN port and ash when there  s act  v  ty.
(NanoStat  on M2/M3/M5 only) The LED w  ll l  ght steady green when an act  ve
Ethernet connect  on  s made to the Secondary port and ash when there  s act  v  ty.
In a  rOS®, you can mod  fy the threshold values for the w  reless s  gnal strength LEDs
on the Advanced tab under S  gnal LED Thresholds. The default values are shown
below:
(NanoStat  onM2/M3/M5 only) Th  s 10/100 Ethernet port  s used for br  dg  ng and
supports software-conf  gurable PoE passthrough.
Note: To use PoE passthrough on the Secondary port, a 24V, 1A PoE
adapter  s requ  red.
Th  s 10/100 Ethernet port  s used to connect the power and should be connected to
the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds wh  le the dev  ce  s powered on. Alternat  vely, the dev  ce may be reset
remotely v  a a Reset button located on the bottom of the PoE adapter.
* The Ma  n port  s labeled LAN on the NanoStat  onlocoM2/M5.
locoM9
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 6/19
Power LED
LAN1 LED
S  gnal LEDs
The LED w  ll l  ght green when the dev  ce  s connected to a power source.
The LED w  ll l  ght steady green when an act  ve Ethernet connect  on  s made to the
Ma  n/LAN port and ash when there  s act  v  ty.
In a  rOS®, you can mod  fy the threshold values for the w  reless s  gnal strength LEDs
on the Advanced tab under S  gnal LED Thresholds. The default values are shown
below:
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 7/19
RP-SMA Antenna Connector
Ma  n/LAN Port
Reset Button
Reserved for future use.
Th  s 10/100 Ethernet port  s used to connect the power and should be connected to
the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds wh  le the dev  ce  s powered on. Alternat  vely, the dev  ce may be reset
remotely v  a a Reset button located on the bottom of the PoE adapter.
Installat  on
1.
2.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 8/19
3.
4.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 9/19
5.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 10/19
6.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 11/19
Connect  ng Power
WARNING: The sw  tch port must comply w  th the power spec  f  cat  ons l  sted  n
th  s Qu  ck Start Gu  de.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 12/19
OR
Opt  onal
Access  ng a  rOS
Ver  fy connect  v  ty  n the a  rOS Conf  gurat  on Interface.
1. Make sure that your host system  s connected v  a Ethernet to the dev  ce.
2. Conf  gure the Ethernet adapter on your host system w  th a stat  c IP address on the
192.168.1.x subnet.
3. Launch your web browser and type https://192.168.1.20  n the address f  eld. Press
enter (PC) or return (Mac).
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 13/19
4. Enter ubnt  n the Username and Password f  elds. Select your Country and Language.
You must agree to the Terms of Use to use the product. Cl  ck Log  n.
The a  rOS Conf  gurat  on Interface w  ll appear, allow  ng you to custom  ze your sett  ngs
as needed. For deta  ls, refer to the User Gu  de ava  lable at u  .com/download/a  rmax
You can also manage your dev  ce us  ng the Ub  qu  t  ® Network Management System.
Setup us  ng the UNMS™ app requ  res the U-Installer, sold separately.
Installer Compl  ance Respons  b  l  ty
Dev  ces must be profess  onally  nstalled and  t  s the profess  onal  nstaller’s
respons  b  l  ty to make sure the dev  ce  s operated w  th  n local country regulatory
requ  rements.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 14/19
The Antenna Ga  n and Output Power f  elds are prov  ded to the profess  onal  nstaller to
ass  st  n meet  ng regulatory requ  rements.
Spec  f  cat  ons
NanoStat  onM2/M3/M365/M5
D  mens  ons 294 x 30 x 80 mm
(11.57 x 1.18 x 3.15")
We  ght
NSM2/NSM5 0.4 kg (14.11 oz)
NSM3/NSM365 0.5 kg (17.64 oz)
Ga  n
NSM2 11 dB 
NSM3/NSM365 13.7 dB 
NSM5 16 dB 
Network  ng Interface (2) 10/100 Ethernet Ports
Max. Power Consumpt  on 8W
Power Supply 24V, 0.5A PoE Adapter (Included)
Power Method Pass  ve PoE (Pa  rs 4, 5+; 7, 8 Return)
Mount  ng Pole Mount  ng K  t Included
Operat  ng Temperature -30 to 75° C (-22 to 167° F)
Operat  ng Hum  d  ty 5 to 95% Noncondens  ng
NSM2/NSM3/NSM365 Operat  ng Frequency (MHz)
NSM2 2412 - 2462
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 15/19
NSM2/NSM3/NSM365 Operat  ng Frequency (MHz)
NSM3 3400 - 3700
NSM365 3650 - 3675
NSM5 Operat  ng Frequency (MHz)
Worldw  de 5150 - 5875
EU 5150 - 5350, 5470 - 5725, 5725 - 5875
USA U-NII-1 5150 - 5250
U-NII-2A 5250 - 5350
U-NII-2C 5470 - 5725
U-NII-3 5725 - 5850
CA 5470 - 5600, 5650 - 5725, 5725 - 5850
NanoStat  onlocoM2/M5/M9
D  mens  ons
locoM9 164 x 72 x 199 mm
(6.46 x 2.83 x 7.83")
locoM2/locoM5 163 x 31 x 80 mm
(6.42 x 1.22 x 3.15")
We  ght
locoM9 0.9 kg (31.75 oz)
locoM2/locoM5 0.18 kg (6.35 oz)
Ga  n
locoM9/locoM2 8 dB 
locoM5 13 dB 
Network  ng Interface (1) 10/100 Ethernet Port
Max. Power Consumpt  on
locoM9 6.5W
locoM2/locoM5 5.5W
Power Supply 24V, 0.5A PoE Adapter (Included)
Power Method Pass  ve PoE (Pa  rs 4, 5+; 7, 8 Return)
Mount  ng Pole Mount  ng K  t Included
Operat  ng Temperature -30 to 75° C (-22 to 167° F)
Operat  ng Hum  d  ty 5 to 95% Noncondens  ng
locoM2 Operat  ng Frequency (MHz)
Worldw  de 2412 - 2462
locoM5 Operat  ng Frequency (MHz)
Worldw  de 5150 - 5875
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 16/19
locoM5 Operat  ng Frequency (MHz)
EU 5150 - 5350, 5470 - 5725, 5725 - 5875
USA U-NII-1 5150 - 5250
U-NII-2A 5250 - 5350
U-NII-2C 5470 - 5725
U-NII-3 5725 - 5850
CA 5470 - 5600, 5650 - 5725, 5725 - 5850
locoM9 Operat  ng Frequency (MHz)
Worldw  de 902 - 928
Safety Not  ces
1. Read, follow, and keep these  nstruct  ons.
2. Heed all warn  ngs.
3. Only use attachments/accessor  es spec  f  ed by the manufacturer.
WARNING: Do not use th  s product  n locat  on that can be submerged by water.
WARNING: Avo  d us  ng th  s product dur  ng an electr  cal storm. There may be a remote
r  sk of electr  c shock from l  ghtn  ng.
Electr  cal Safety Informat  on
1. Compl  ance  s requ  red w  th respect to voltage, frequency, and current requ  rements  nd  cated
on the manufacturer’s label. Connect  on to a d  fferent power source than those spec  f  ed may
result  n  mproper operat  on, damage to the equ  pment or pose a f  re hazard  f the l  m  tat  ons
are not followed.
2. There are no operator serv  ceable parts  ns  de th  s equ  pment. Serv  ce should be prov  ded only
by a qual  f  ed serv  ce techn  c  an.
3. Th  s equ  pment  s prov  ded w  th a detachable power cord wh  ch has an  ntegral safety ground
w  re  ntended for connect  on to a grounded safety outlet.
a. Do not subst  tute the power cord w  th one that  s not the prov  ded approved type. Never
use an adapter plug to connect to a 2-w  re outlet as th  s w  ll defeat the cont  nu  ty of the
ground  ng w  re.
b. The equ  pment requ  res the use of the ground w  re as a part of the safety cert  f  cat  on,
mod  f  cat  on or m  suse can prov  de a shock hazard that can result  n ser  ous  njury or death.
c. Contact a qual  f  ed electr  c  an or the manufacturer  f there are quest  ons about the
 nstallat  on pr  or to connect  ng the equ  pment.
d. Protect  ve earth  ng  s prov  ded by L  sted AC adapter. Bu  ld  ng  nstallat  on shall prov  de
appropr  ate short-c  rcu  t backup protect  on.
e. Protect  ve bond  ng must be  nstalled  n accordance w  th local nat  onal w  r  ng rules and
regulat  ons.
L  m  ted Warranty
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 17/19
u  .com/support/warranty
The l  m  ted warranty requ  res the use of arb  trat  on to resolve d  sputes on an  nd  v  dual bas  s, and,
where appl  cable, spec  fy arb  trat  on  nstead of jury tr  als or class act  ons.
Compl  ance
FCC
Changes or mod  f  cat  ons not expressly approved by the party respons  ble for compl  ance could
vo  d the user’s author  ty to operate the equ  pment.
Th  s dev  ce compl  es w  th Part 15 of the FCC Rules. Operat  on  s subject to the follow  ng two
cond  t  ons.
1. Th  s dev  ce may not cause harmful  nterference, and
2. Th  s dev  ce must accept any  nterference rece  ved,  nclud  ng  nterference that may cause
undes  red operat  on.
Th  s equ  pment has been tested and found to comply w  th the l  m  ts for a Class A d  g  tal dev  ce,
pursuant to part 15 of the FCC Rules. These l  m  ts are des  gned to prov  de reasonable protect  on
aga  nst harmful  nterference when the equ  pment  s operated  n a commerc  al env  ronment. Th  s
equ  pment generates, uses, and can rad  ate rad  o frequency energy and,  f not  nstalled and used
 n accordance w  th the  nstruct  on manual, may cause harmful  nterference to rad  o
commun  cat  ons. Operat  ons of th  s equ  pment  n a res  dent  al area  s l  kely to cause harmful
 nterference  n wh  ch case the user w  ll be requ  red to correct the  nterference at h  s own expense.
Th  s rad  o transm  tter has been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Th  s dev  ce compl  es w  th ISED Canada l  cence-exempt RSS standard(s). Operat  on  s subject to the
follow  ng two cond  t  ons:
1. Th  s dev  ce may not cause  nterference, and
2. Th  s dev  ce must accept any  nterference,  nclud  ng  nterference that may cause undes  red
operat  on of the dev  ce.
Th  s rad  o transm  tter has been approved by ISED Canada.
The dev  ce for operat  on  n the band 5150-5250 MHz  s only for  ndoor use to reduce the potent  al
for harmful  nterference to co-channel mob  le satell  te systems.
CAN ICES-3(A)/NMB-3(A)
Le présent appare  l est conforme aux CNR d’ISDE Canada appl  cables aux appare  ls rad  o exempts
de l  cence. L’explo  tat  on est autor  sée aux deux cond  t  ons su  vantes :
1. l’appare  l ne do  t pas produ  re de brou  llage;
2. l’appare  l do  t accepter tout brou  llage rad  oélectr  que sub  , même s  le brou  llage est
suscept  ble d’en compromettre le fonct  onnement.
Le présent émetteur rad  o a été approuvé par ISDE Canada.
Les d  spos  t  fs fonct  onnant dans la bande 5150-5250 MHz sont réservés un  quement pour une
ut  l  sat  on à l’  ntér  eur af  n de rédu  re les r  sques de brou  llage préjud  c  able aux systèmes de
satell  tes mob  les ut  l  sant les mêmes canaux.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 18/19
IMPORTANT NOTE
Rad  at  on Exposure Statement
Th  s equ  pment compl  es w  th rad  at  on exposure l  m  ts set forth for an uncontrolled
env  ronment.
Th  s equ  pment should be  nstalled and operated w  th m  n  mum d  stance 20 cm between the
rad  ator and your body.
Th  s transm  tter must not be co-located or operat  ng  n conjunct  on w  th any other antenna or
transm  tter.
AVIS IMPORTANT
Déclarat  on sur l’expos  t  on aux rayonnements
Cet équ  pement est conforme aux l  m  tes prévues pour l’expos  t  on aux rayonnements dans un
env  ronnement non contrôlé.
Lors de l’  nstallat  on et de la m  se en fonct  onnement de l’équ  pement, assurez-vous qu’  l y a  t
une d  stance m  n  male de 20 cm entre l’élément rayonnant et vous.
Cet émetteur ne do  t être  nstallé à prox  m  té d’aucune autre antenne n  d’aucun autre
émetteur, et ne do  t être ut  l  sé conjo  ntement à aucun autre de ces appare  ls.
Austral  a and New Zealand
Warn  ng: Th  s equ  pment  s compl  ant w  th Class A of CISPR 32. In a res  dent  al
env  ronment th  s equ  pment may cause rad  o  nterference.
Braz  l
Nota: Este equ  pamento não tem d  re  to à proteção contra  nterferênc  a prejud  c  al e não
pode causar  nterferênc  a em s  stemas dev  damente autor  zados.
CE Mark  ng
CE mark  ng on th  s product represents the product  s  n compl  ance w  th all d  rect  ves that are
appl  cable to  t.
Country L  st
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband F  xed W  reless Access) members noted  n blue
Note: Th  s dev  ce meets Max. TX power l  m  t per ETSI regulat  ons.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de

17.02.2020 NanoStatonM/locoM Seres Quck Start Gude
https://dl.ubnt.com/qsg/NanoStatonM_NanoStatonlocoM/NanoStatonM_NanoStatonlocoM_EN.html 19/19
The follow  ng apply to products that operate  n the 5 GHz frequency range:
Note: Th  s dev  ce  s restr  cted to  ndoor use only when operat  ng  n the 5150 - 5350 MHz
frequency range w  th  n all member states.
Note: All countr  es l  sted may operate at 30 dBm. BFWA member states may operate at 36
dBm.
Note: Operat  on  n the 5.8 GHz frequency band  s proh  b  ted  n BFWA member states.
Other countr  es l  sted may use the 5.8 GHz frequency band.
WEEE Compl  ance Statement
Declarat  on of Conform  ty
Onl  ne Resources
© 2020 Ub  qu  t  Inc. All r  ghts reserved.
NanoStat  onM/locoM Ser  es Qu  ck Start Gu  de