Ubiquiti UniFi AC AP Mesh Pro User manual

UniFi AC AP Mesh Pro Mounting Bracket Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4) Flange Nuts (Qty. 4) Screws (Qty. 4)
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Screw Anchors (Qty. 4) Gigabit PoE Adapter (48V,
0.5A)* Power Cord*
* Included only in the single-pack of the UAP-AC-M-PRO
Installation Requirements
13 mm wrench (for pole mounting)
Drill and 8 mm drill bit (for wall mounting)
Phillips screwdriver (for wall mounting)
Cable feed must be pointed downwards when mounted.
Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M-
PRO and the other at the entry point to the building. The ETH-SP will absorb power
surges and safely discharge them into the ground.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

IMPORTANT: The UAP-AC-M-PRO requires the UniFi Controller v5.4 or
higher, available at: ui.com/download/unifi
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Web Browser: Google Chrome (Other browsers may have limited functionality)
UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
Wireless Adoption Requirements
The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This
feature requires a currently managed UniFi AP operating with the following
configuration:
The UniFi AP must be running firmware 3.7.7 or newer
At least one SSID enabled and operating on 5 GHz band
The UAP-AC-M-PRO must be within wireless range of the UniFi AP
Hardware Overview
LED
Ports
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Secondary
Reset
The Secondary port is a Gigabit Ethernet port used for bridging.
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Main
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
The Main port is a Gigabit PoE port used to connect the power and should be
connected to the LAN and DHCP server. Power can be provided by one of the
following:
Gigabit PoE Adapter (included)
Ubiquiti UniFi Switch with PoE
802.3af/802.3at PoE+ compliant switch
Hardware Installation
The UAP-AC-M-PRO can be mounted on a pole or mast, or on a wall. Perform the
steps for the appropriate installation.
Pole Mount
1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

6.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD