Ubiquiti UniFi nanoHD AP User manual

UniFi nanoHD AP Mounting Bracket Ceiling Backing Plate
Screws (Qty. 4) Flat Head Screws (Qty. 4) Keps Nuts (Qty. 4)
Screw Anchors (Qty. 4) Gigabit PoE* (48V, 0.3A) with
Mount Bracket Power Cord*
Package Contents
* Included only in the single-pack of the UAP-nanoHD.
Installation Requirements
CAT5 cable
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
IMPORTANT: The UAP-nanoHD requires the UniFi Network Application
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
1 af 19
04-05-2022 09:52

Locking Notch
Reset
v5.7 or higher, available at: ui.com/download/unifi
System Requirements
Microsoft Windows 7/8/10, Mac OS X, or Linux
Java Runtime Environment 1.8 (or above)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Network Application v5.7 or higher (available at: ui.com/download/unifi)
Hardware Overview
LED
Ports
The Locking Notch will be used with the Mounting Bracket to help secure the
UniFi AP. (This is described further in the Mounting Bracket section.)
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
2 af 19
04-05-2022 09:52

Ethernet
Cable Feed Plug
Locking Tab
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for
more than five seconds.
This Gigabit Ethernet port is used to connect the power and should be
connected to the LAN and DHCP server.
If your Ethernet cable feeds along the mounting surface, remove the Cable
Feed Plug.
Mounting Bracket
During installation, the Locking Tab on the Mounting Bracket moves from the
Initial Position to the Final Position, where the Locking Tab fits securely into the
Locking Notch on the UniFi AP to help prevent theft.
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
3 af 19
04-05-2022 09:52

Initial Position Final Position
Note: If you need to remove the UniFi AP from the Mounting Bracket,
insert a paper clip in the Slot to release the Locking Tab and turn the
UniFi AP counterclockwise.
Hardware Installation
The device can be mounted on the wall or ceiling. Perform the steps for the
appropriate installation.
Wall Mount
1.
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
4 af 19
04-05-2022 09:52

2.
Optional
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
5 af 19
04-05-2022 09:52

3.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
6 af 19
04-05-2022 09:52

4.
Optional
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
7 af 19
04-05-2022 09:52

5.
6.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
8 af 19
04-05-2022 09:52

7.
Ceiling Mount
1.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
9 af 19
04-05-2022 09:52

2.
3.
4.
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
10 af 19
04-05-2022 09:52

5.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
11 af 19
04-05-2022 09:52

6.
7.
8.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
12 af 19
04-05-2022 09:52

9.
Powering the UniFi AP
The UAP-nanoHD features auto-sensing 802.3af PoE support and can be
powered by any of the following:
Ubiquiti UniFi Switch with PoE
802.3af PoE compliant switch
Ubiquiti Gigabit PoE Adapter (48V, 0.3A)
The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-
pack units, PoE adapters or a UniFi Switch with PoE may be purchased
separately.
Connecting to a PoE Switch
Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port
on the switch.
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
13 af 19
04-05-2022 09:52

Connecting to the PoE Adapter
1. Connect the Ethernet cable from the device to the POE port of the PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the Power Cord into a
power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the
desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket using two fasteners (not
included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket, and then
slide the adapter down.
Specifications
UAP-nanoHD
Dimensions 160 x 160 x 32.65 mm
(6.3 x 6.3 x 1.29")
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
14 af 19
04-05-2022 09:52

UAP-nanoHD
Weight
With Mounting Kits 300 g (10.6 oz) 315 g (11.1 oz)
Networking Interface (1) RJ45 GbE
Buttons (1) Reset to Defaults
Power Method 802.3af
Power Supply 48V, 0.3A Gigabit PoE Adapter*
Max. Power Consumption 10.5W
Operating Frequency 2.4 GHz
5 GHz
Max. TX Power
2.4 GHz
5 GHz 23 dBm 26 dBm
Antenna Gain
2.4 GHz
5 GHz 2.8 dBi 3 dBi
MIMO
2.4 GHz
5 GHz 2x2 4x4
Radio Rate
2.4 GHz
5 GHz 300 Mbps 1733 Mbps
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
* Only the single-pack of the UAP-nanoHD includes a PoE adapter.
Operating Frequency (MHz)
US/CA 2400 - 2483.5
U-NII-1 5150 - 5250
U-NII-2A 5250 - 5350
U-NII-2C 5470 - 5725
U-NII-3 5725 - 5850
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
15 af 19
04-05-2022 09:52

Operating Frequency (MHz)
Worldwide 2400 - 2483.5
5150 - 5875
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire hazard
if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided
only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety
ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never
use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification,
modification or misuse can provide a shock hazard that can result in serious injury or
death.
c. Contact a qualified electrician or the manufacturer if there are questions about the
installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide
appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and
regulations.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
16 af 19
04-05-2022 09:52

FCC
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operations of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This radio transmitter has been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
This radio transmitter has been approved by ISED Canada.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Le présent émetteur radio a été approuvé par ISDE Canada.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes
de satellites mobiles utilisant les mêmes canaux.
IMPORTANT NOTE
Radiation Exposure Statement
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
17 af 19
04-05-2022 09:52

This equipment complies with radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20 cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
AVIS IMPORTANT
Déclaration sur l’exposition aux rayonnements
Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements
dans un environnement non contrôlé.
Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y
ait une distance minimale de 20 cm entre l’élément rayonnant et vous.
Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre
émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
Brazil
Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e
não pode causar interferência em sistemas devidamente autorizados.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are
applicable to it.
Country List
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
The following apply to products that operate in the 5 GHz frequency range:
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
18 af 19
04-05-2022 09:52

Note: This device is restricted to indoor use only when operating in the 5150 - 5350
MHz frequency range within all member states.
Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member
states. Other countries listed may use the 5.8 GHz frequency band.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2022 Ubiquiti Inc. All rights reserved.
UAP-nanoHD Quick Start Guide
UAP-nanoHD Quick Start Guide
https://dl.ui.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html
19 af 19
04-05-2022 09:52