Ubiquiti UAP-AC-M User manual

UMA-D Antenna Ball Joint Mount Lock Ring
Screws (Qty. 4) Screw Anchors (Qty. 4) Hex Bolt
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Wall Mount Plate Metal Strap
RF Cables (Qty. 2)
Installation Requirements
UniFi AC Mesh Access Point, model UAP-AC-M
Wall-mounting: drill and 6 mm drill bit
Pole-mounting: 7 mm socket wrench
Phillips screwdriver
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor
wired Ethernet connections and should be grounded through the AC ground of the
PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the UAP-AC-M
and the other at the entry point to the building. The ETH-SP-G2 will absorb power
surges and safely discharge them into the ground.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Diagram Showing Use of Ethernet Surge Protectors
Hardware Installation
The UniFi antenna can be mounted on a wall or pole. Go to the appropriate mounting
instructions: Wall-Mounting or “Pole-Mounting”.
Wall-Mounting
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

6.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

7.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

8.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD