Unfinished Furniture of Wilmington BE-172TA User manual

ITEM NO.: BE-172TA AND BE-172TB
ISSUED NOV 08, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: 72 IN ALEXA TRESTLE BENCH
: BE-172TA AND BE-172TB

ITEM NO.: BE-172TA AND BE-172TB
ISSUED NOV 08, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 2 -
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws, bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST T-172TA
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Support bar
1
C
X-Base
2
D
Cross bar
1
BEFORE ASSEMBLY

ITEM NO.: BE-172TA AND BE-172TB
ISSUED NOV 08, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 3 -
PART LIST T-172TB
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
E
Base
2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short Bolt
(M6 x 35mm)
8
6
Large Spring washer
(8.5 x 13mm)
8
2
Medium Bolt
(M6 x 55mm)
7
7
Large Flat Washer
(8.5 x 19mm)
8
3
Long Bolt
(M8 x 60mm)
8
8
U-Washer
2
4
Small Spring washer
(6.5 x 11mm)
13
9
Allen key
(M4 x 30mm x 110mm)
1
5
Small Flat Washer
(6.5 x 13mm)
13
NOTE: HARDWARE IS PACKED IN CARTON BE-172TB.

ITEM NO.: BE-172TA AND BE-172TB
ISSUED NOV 08, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 4 -
STEP 1
Attach support bar (B) to top (A) with bolts (2), and washers (4) and (5) as shown below. Tighten with
Allen key (9).
STEP 2
Attach X-Base (C) to the top (A) and attach crossbar (D) to X-Base (C) with bolts (1), and washers (4)
and (5) as shown below. Tighten with Allen key (9).
A
B
2
9
D
1
9
A
B
C

ITEM NO.: BE-172TA AND BE-172TB
ISSUED NOV 08, 2018
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 5 -
STEP 3
Attach bases (E) to cross bar (D) with bolts (2) and u-washers (8) as shown below. Tighten with Allen key (9).
Attach bases (E) to the top (A) with bolts (3), and washers (6) and (7) as shown below. Tighten with Allen key (9).
9
2
8
D
E
E