Unfinished Furniture of Wilmington T-4040XBT/T-60B User manual

ITEM :
T
-
4040
XB
T OR T
-
6040XBT
&
T
-
60B OR T
-
60G
(PACKED IN SEPARATE BOX)
REVISED SEP 19, 2014
Prin
ted in Vietnam
THE HARDWARE REQUIRED TO ATTACH THE LEGS IS PACKED WITH THE LEGS
- 1 -
ASSEMBLY INSTRUCTIONS
T-4040XBT/T-60B T-4040XBT/T-60G
T-6040XBT/T-60B T-6040XBT/T-60G
Description
Item No.
:
TABLE
: T-4040XBT OR T-6040XBT & T-60B OR T-60G
(PACKED IN SEPARATE BOX)

ITEM :
T
-
4040
XB
T OR T
-
6040XBT
&
T
-
60B OR T
-
60G
(PACKED IN SEPARATE BOX)
REVISED SEP 19, 2014
Prin
ted in Vietnam
THE HARDWARE REQUIRED TO ATTACH THE LEGS IS PACKED WITH THE LEGS
- 2 -
BEFORE ASSEMB
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base.
PART
LIST
T
-
4040XBT OR T
-
6040XBT
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A TABLE TOP 1
PART LIST
T
-
60B OR T
-
60G
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
B LEG 4

ITEM :
T
-
4040
XB
T OR T
-
6040XBT
&
T
-
60B OR T
-
60G
(PACKED IN SEPARATE BOX)
REVISED SEP 19, 2014
Prin
ted in Vietnam
THE HARDWARE REQUIRED TO ATTACH THE LEGS IS PACKED WITH THE LEGS
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qt
y
Sketch
NO
Description
Q
ty
Sketch
1 Hexagon nut
(M8x13mm) 8
3
Lock washer
(8.5x13mm)
8
2
Flat washer
(8.5x19mm)
8 4 Wrench
(13mm) 1
STEP 1
Attach the legs (B) to the top (A) with washers (2), (3), and nuts (1) as shown below. Tighten with the
wrench (4).

ITEM :
T
-
4040
XB
T OR T
-
6040XBT
&
T
-
60B OR T
-
60G
(PACKED IN SEPARATE BOX)
REVISED SEP 19, 2014
Prin
ted in Vietnam
THE HARDWARE REQUIRED TO ATTACH THE LEGS IS PACKED WITH THE LEGS
- 4 -
STEP 2
Unlock the table top from both sides underneath of the top as shown below.
Pull the 2 parts of the table top apart.
S
TEP 3
Lift and open the butterfly leaf in the center of the open table top. Push the table top closed.
Lock the mechanism underneath the table top as shown below.